[Volkrays]

Hi everyone,

I want to setup expressvpn on my dd-wrt router but after create an openvpn client its failed. I use linkysys cisco e1500 to become dd-wrt router, i flash the firmware to DD-WRT. I have followed all the instructions from expressvpn.com regarding dd-wrt setup but when i checked on vpn status, there was nothing there. I can’t create an openvpn on my router. Anyone here have a same problem like me?

The instruction from expressvpn:

https://www.google.co.id/amp/s/www.expressvpn.com/support/vpn-setup/manual-config-for-dd-wrt-router-with-openvpn/amp/[/url]

[egc]

and what build are you using?

Below some pointers which might help to get the best out of DDWRT and out of the forum:
1. Research your router, start with the supported devices wiki:
https://wiki.dd-wrt.com/wiki/index.php/Supported_Devices .
2. In the supported devices wiki you can see if your router is supported and what architecture your router has and if you are lucky also an install guide/wiki.
3. Post in the right forum, from the former step you can see if your router is Broadcom, Qualcomm/Atheros, Marvell or other, use that forum to post router specific questions, for networking questions post in the Advanced Networking forum and for other things in the General Questions forum.
4. When posting always state router model, build number and when applicable the Kernel version.
Describe your problem and how you think it can be solved.
Give as much detail as you can also provide your network setup if applicable.
If you followed a wiki or manual let us know which one(s).
For your Network setup, state what wiki you have used: https://wiki.dd-wrt.com/wiki/index.php/Linking_Routers
5. When posting pictures make sure the maximum width is not more than 600 pixels.
6. Do not hijack a thread, meaning do not post your own problem in someone else's thread. Just start your own thread. This so that it can be searched and found by others.
7. If your post is answered and your problem solved, mark your thread with [SOLVED] (the header of your first post).
8. Do NOT use the router database, builds can be found at:
https://dd-wrt.com/support/other-downloads/?path=betas%2F2020%2F
All builds are beta including those from the router database.
9. Before uploading a new build to your router, research the build by looking in the build threads.
This is an example of a build thread for build 42617 for Broadcom routers:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=323436
Search build threads with the search function and search on build number.
10. Use the build threads from the former step to report success or problems.
11. For older Broadcom routers (Linksys WRT54 and E series) read the peacock thread although some of it is outdated: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=51486
Builds can be found in the Broadcom directory for Linux kernel 2.4, in Broadcom_K26 for Linux K2.6 and in Broadcom_K3X for Linux K3.X.
12. If you are sure you have discovered a bug, after asking and querying the forum, you can report a real bug in the bug tracker: https://svn.dd-wrt.com/
This is also the place where the commits/changes to the source are administrated.
13. Recommended reading:
https://forum.dd-wrt.com/wiki/index.php/Main_Page
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=54845
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=54959
14. If you are happy with DDWRT and want it to live on then donate:
https://dd-wrt.com/donations/

[Volkrays]

[egc]

OK, I send you the forum rules/pointers to help

It is valuable information

Point 8, Do not use the router database, build 40599 is a crappy build

Research upgrading, the latest build is 42819 but look in the build threads.

Probably use a K3 mega build, point 1 will get you to the wiki

[Volkrays]