r42819 WNDR3700v4 as main router without any problems.
up 1 day, 4:37
I now have the EA8500 back in as main gateway router.
Main reason I waited to put EA8500:
The years old CyberPower DT30U12V-NA3-G that they gave me for the ONT when we first went to fiber
was now a goner and caused me a bit of grief last year during power outages.
I put in a APC BN1350G but still had the CyberPower plugged into APC.
Anyways, one of the ISP guys just now dropped me off a regular 110V cord for the ONT
so now it is plugged directly into the APC UPS.
My ISP peoples are really good. I just called them yesterday about an ONT cord.
AND it don't hurt none that I live nextdoor to their local office in my liitle townsite.
Now I can just throw the oldass CyberPower thing in the junk pile.
Linksys EA8500
DD-WRT v3.0-r42819 std (03/30/20)
Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
VLAN on port4 + ath0.1 via br1
34 static leases
local DNS
Port Range Forwarding
br1 net DNS is QUAD9
main net uses openNIC DNS
openVPN server & connected to it uses same DNS as main router net
HFSC CAKE
CPUs set to ondemand
ondemand/up_threshold set to 35
http://www.dslreports.com/speedtest/61455340 http://www.dslreports.com/speedtest/61455428 https://www.nperf.com/r/3247477858686175-T2ywHezM Everything is worky perfect just like she should
Joined: 16 Nov 2015 Posts: 6440 Location: UK, London, just across the river..
Posted: Wed Apr 01, 2020 10:06 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r42819 std (03/30/20)
Kernel Version Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r42819 std (03/30/20)
Kernel Version Linux 3.18.140-d4 #74688 Mon Mar 30 04:20:14 +04 2020 mips
Router Model TP-Link TL-WR740Nv1
Firmware Version DD-WRT v3.0-r42819 std (03/30/20)
Kernel Version Linux 3.10.108-d10 #43131 Mon Mar 30 03:35:30 +04 2020 mips
update: CLI
reset: NO
status: Operational 8h+
errors: country domain is missing from all routers above
or i missed few bits form svn....aggh
all works as it should...10q BS..!!
fiddling with SmartDNS now will report later...well still no fun it seems WIP
P.S.edited...
reflashed my 740v1 via GUI and weget is there now happy days... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Thu Apr 02, 2020 14:54; edited 3 times in total
Router Model TP-Link TL-WR740Nv1
Firmware Version DD-WRT v3.0-r42819 std (03/30/20)
Kernel Version Linux 3.10.108-d10 #43131 Mon Mar 30 03:35:30 +04 2020 mips
update: CLI
reset: NO
status: Operational 8h+
errors: TP-Link TL-WR740Nv1 weget is missing...
Weget? I presume wget, was it ever available for micro builds? If my presumption is wrong can you elaborate on the error, have you found out any other issues with 740N, I see you have both V1 and V4, any reason for not updating the V4 to the latest build?
Everything works as before. I tried out smartdns and found that the response times (using dig) varied greatly on multiple queries for just one domain. I got much faster performance (according to dig) with smartdns turned off.
Joined: 16 Nov 2015 Posts: 6440 Location: UK, London, just across the river..
Posted: Wed Apr 01, 2020 18:48 Post subject:
dexterv wrote:
Weget? I presume wget, was it ever available for micro builds? If my presumption is wrong can you elaborate on the error, have you found out any other issues with 740N, I see you have both V1 and V4, any reason for not updating the V4 to the latest build?
yep typo i reedit my post...
wget was always there just updated 740v1 with it,
than tried it for downgrade as GUI was blank page (reboot restore my GUI page) and was not connecting and DL anything, i haven't tried it again will see tomorrow and report.. i may be wrong..will see..
740v4 at the moment, i have no access to it ..
P.S. reflashed my 740v1 via GUI and wget is there happy days _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Thu Apr 02, 2020 14:55; edited 1 time in total
CPU has to be set 'ondemand' or they ain't no such thing as up_threshold
--
EDIT: I'm using min/max samba set to 3.11 so
it just makes the ol girl wind-up a bit faster.
Prolly do same for iffin you have a really fast WAN connection like close to a gigabit but I only have a 50/50 ISP connection ... so there is that ...'bout all I know
---
EDIT again:
you can set just one CPU to 'ondemand' ... either one you want
and leave the other on 'performance' (max CPU freq)
I have tinkered with that before if you know what CPU does what you might want one set to max and the other just 'ondemand'
then again, that is really getting pretty silly and BS has decided max CPU is best for both cores anyways .... I never leave mine on max but that is just me
If you wanted to do such a thing I can tell ya how but there is really no point..... ok, enough rambling on from me
Joined: 05 Oct 2008 Posts: 666 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Thu Apr 02, 2020 9:34 Post subject:
Router R7800
f/w 42819 updated from 42813
no reset
Up two days.
No problems at all.
In the startup commands since several f/w versions ago, I have had the following command line, likely diligently copied from someone on this forum:
# Enable CPU frequency scaling
for CPUFREQ in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor; do [ -f $CPUFREQ ] || continue; echo -n ondemand > $CPUFREQ; done
The original intention as I recall, was to manually adjust the threshold at every new f/w version, but I subsequently forgot about that. Until now, so I did the following:
All fine and well, but there are two cpu's, which is addressed in the loop of the startup command, but not in the manual up_threshold setting command, so there's probably something awry here.
It seems obvious that one can create any number of files with settings, but if they have the wrong name or are in the wrong place, they will not have the desired effect or worse.
How can I add an up_threshold setting to the startup command loop, so that it is actually valid for both cpu's?
