New Build 42803: 03-25-2020-r42803

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 4493
Location: Texas, USA

PostPosted: Wed Mar 25, 2020 13:40    Post subject: New Build 42803: 03-25-2020-r42803 Reply with quote
WARNING: DO NOT flash this experimental test build unless you know the risks and recovery methods. Report here to provide important info for developers and users. Always state your hardware model & version, mode (e.g. Repeater) and SPECIFIC build (e.g. netgear-r7000-webflash). Avoid discussions and create a new thread for specific problems or questions as this thread is not for support, and posts may be deleted or moved.

Downloads: if a link does not work, try another (alternative @DD-WRT website)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-25-2020-r42803/
ftp://ftp.dd-wrt.com/betas/2020/03-25-2020-r42803/
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 42747
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33555 for non-Broadcom.
3. PBR/UDP with SFE working again since r40513 (see 6729)
4. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
5. Reset button was broken in 40571; fixed in build 40750.
6. CVE-2019-14899 VPN fix (r41784: applicability depends on VPN setup) and GUI toggle (r41812): ticket 6920, 6928, 6931, 6932
7. In-kernel samba now used and default min/max versions have changed, so change them if needed: 6954, 6957

Issues, observations, and/or workarounds reported:
1. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use (without entware): 6246

Template example to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b][u]Router/Version:[/u][/b]
[b]Mode: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Status: [/b]

_________________
"Are you leaving anything out of the picture, or is your post complete with all information required for us to help you? If it is not complete, fix it now."
---------------------------------------------------------
E4200 v1 DD-WRT 42819 mega K3.x
R7000P DD-WRT 40270M kongac
R7800 DD-WRT 42819 std
E4200 v1 FreshTomato 2020.2
E4200 v1 FreshTomato 2020.3.development
R7000 FreshTomato 2020.3.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.8
---------------------------------------------------------
Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
i0ntempest
DD-WRT Novice


Joined: 26 Jul 2019
Posts: 4

PostPosted: Thu Mar 26, 2020 2:29    Post subject: Reply with quote
Router/Version: Dlink DIR-882 A1
Mode: Gateway, AP
File: dlink-dir810lb1-webflash.bin
Kernel: Linux D-Link DIR-882 A1 4.14.174 #253 SMP Wed Mar 25 14:07:31 +04 2020 mips DD-WRT
Status: Mostly working
Uptime: 3+ hours
WiFi dropping and USB problem still exists. Also I've noticed that 2.4G status light will sometimes dim for a few secs and then go back to blinking. Don't know if this means anything though.
EDIT: Seems that WPA3 SAE key and WPA(2) key is set separately, but when both are enabled, only one field is shown.


Last edited by i0ntempest on Thu Mar 26, 2020 20:52; edited 1 time in total
Iceberger
DD-WRT Novice


Joined: 03 Jun 2018
Posts: 29

PostPosted: Thu Mar 26, 2020 14:21    Post subject: Regulatory Domain is missing Reply with quote
Router Model / Version: Dlink DIR-882 A1
File: dlink-dir882-a1-webflash.bin
Firmware: DD-WRT v3.0-r42803 std (03/25/20)
Kernel: Linux 4.14.174 #253 SMP Wed Mar 25 14:07:31 +04 2020 mips
Previous: DD-WRT v3.0-r42681 std (03/13/20)
Reset: No
Mode: Gateway / AP
Uptime: ~ 20 hours
Status: working
Issues / Errors: Regulatory Domain is missing in the Wireless Physical Interface ath1 [5 GHz/802.11ac] - MT7615 802.11ac Settings
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 908

PostPosted: Fri Mar 27, 2020 0:57    Post subject: Reply with quote
This is normal. Regulatory Domain country setting is global and now only appears in the first physical interface.
Iceberger
DD-WRT Novice


Joined: 03 Jun 2018
Posts: 29

PostPosted: Fri Mar 27, 2020 12:48    Post subject: Reply with quote
blkt wrote:
This is normal. Regulatory Domain country setting is global and now only appears in the first physical interface.

Thanks!
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 4493
Location: Texas, USA

PostPosted: Fri Mar 27, 2020 13:02    Post subject: Reply with quote
@Iceberger, if you had checked your PMs, you would've already had the answer. Twisted Evil Cool Laughing
_________________
"Are you leaving anything out of the picture, or is your post complete with all information required for us to help you? If it is not complete, fix it now."
---------------------------------------------------------
E4200 v1 DD-WRT 42819 mega K3.x
R7000P DD-WRT 40270M kongac
R7800 DD-WRT 42819 std
E4200 v1 FreshTomato 2020.2
E4200 v1 FreshTomato 2020.3.development
R7000 FreshTomato 2020.3.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.8
---------------------------------------------------------
Linux User #377467 counter.li.org / linuxcounter.net
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum