Posted: Sat Mar 21, 2020 12:33 Post subject: New Build - 03/20/2020 - r42747
WARNING:DO NOT flash this experimental test build unless you know the risks and recovery methods. Report here to provide important info for developers and users. Always state your hardware model & version, mode (e.g. Repeater) and SPECIFIC build (e.g. netgear-r7000-webflash). Avoid discussions and create a new thread for specific problems or questions as this thread is not for support, and posts may be deleted or moved.
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33555 for non-Broadcom.
3. PBR/UDP with SFE working again since r40513 (see 6729)
4. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
5. Reset button was broken in 40571; fixed in build 40750.
6. CVE-2019-14899 VPN fix (r41784: applicability depends on VPN setup) and GUI toggle (r41812): ticket 6920, 6928, 6931, 6932
7. In-kernel samba now used and default min/max versions have changed, so change them if needed: 6954, 6957
Issues, observations, and/or workarounds reported: 1. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use (without entware):6246
Template example to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Linksys EA8500
DD-WRT v3.0-r42747 std (03/20/20)
Linux 4.9.216 #530 SMP Fri Mar 13 04:34:59 +03 2020 armv7l
GUI installed over r42741
all very good
up 1 day, 6:20
#
Netgear WNDR3700 V4
DD-WRT v3.0-r42747 std (03/20/20)
Linux 3.18.140-d4 #73981 Fri Mar 20 10:02:56 +04 2020 mips
GUI installed over r42741
all very good
up 1 day, 6:22
Errors: QoS are not working, or the net here in italy is satured, or the net of dslreports is not working, but I get a terrible score with dslreports: http://i.imgur.com/5QP8NMn.jpeg I never get these terrible results, I can't understand if is due to the netwkork (all people at home) or the router. I also switched back to old builds but I get the same terrible results
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Sat Mar 21, 2020 15:41 Post subject:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r42747 std (03/20/20)
Kernel: Linux 4.9.216 #530 SMP Fri Mar 13 04:34:59 +03 2020 armv7l
Previous: DD-WRT v3.0-r42729 std (03/18/20)
Reset: Yes
Uptime: ~6 hours
Status: OK
Issues/Errors: _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Status: IT SUCKS. This version and the one right before it, (3/18/2020), both have major issues that is causing major hang ups, straight up periods of 10 second delays when attempting to control other devices that use wifi on my network like my blueair purifiers, and just overall is noticeably slower feeling but yet still puts up the same dl/ul speed via speedtest.net
Reset Required: Maybe? I didn't reset it though. I usually don't reset it unless I am reverting to a previous firmware version, which is what I am about to do right now...
This version and the one right before it, (3/18/2020), both have major issues that is causing major hang ups, straight up periods of 10 second delays when attempting to control other devices that use wifi on my network like my blueair purifiers, and just overall is noticeably slower feeling but yet still puts up the same dl/ul speed via speedtest.net
I have the same hardware and do not have any issues with this version nor the previous. I know this is a boilerplate suggestion but have you tried changing channels? _________________ Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Router: Netgear R7800
Firmware: DD-WRT v3.0-r42747 std (03/20/20)
Kernel: Linux 4.9.216 #530 SMP Fri Mar 13 04:34:59 +03 2020 armv7l
Status: Working
Reset: No
Previous: 42681
Errors: No
Temperatures : CPU 57.324 °C / ath0 52 °C / ath1 52 °C
Working very well :
Router mode : DHCP
SFE Enable STP Disable
DNSMasq
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Check unsigned DNS replies
Local DNS
No DNS Rebind
ath0, ath1
Vpn (OpenVPN Client)
Dlink DIR-859
Router mode : DHCP
SFE Enable
STP Disable
AP STA on 5ghz Module (linked with a WDR3500 with +8 clients)
QOS enabled
total +25 active clients
not the same for DslReports 
