Thank you!
Was July his stable build or just the last test?
How long is everyone planning on staying on Kong's build and what would you use as an alternative?
I have Netgear R6700v3.
Posted: Tue Oct 08, 2019 14:29 Post subject: RE: R6400v2 incorrectly ids as R7000P
egc wrote:
The guide specifically mentions not to use a build before 36995.
In the guide itself also is a section about recovery.
Backstory:
I bought this router months ago, and flashed what I thought was the latest stable build (36104) at that time. When things went sideways, I shelved it.
I tried doing a recovery with nmrpflash, but could not make it work. The IP of the router isn't in the list of ports. Although I can ping it and access the UI from 192.168.1.1, nmrpflash doesn't see it. It shows all zeroes for net0 when I run nmrpflash -L
Joined: 19 Jan 2018 Posts: 17 Location: Netherlands
Posted: Sat Oct 26, 2019 12:06 Post subject:
Hi ,
I succesfully flashed my R6400v2 (boardid ) from stock Firmware Version V1.0.4.82_10.0.57 to BS dd-wrt v3.0-r41328.
By using EGC's Netgear_R6400v2_(R6700v3)_Guide_v1.08.doc ( see first post in this topic) it was a piece of cake.
It was also no problem to downgrade the stock firmware.
Warning! The firmware version you are trying to upload is older than the one you had.
Do you still want to continue?
Current Firmware Version V1.0.4.82_10.0.57
Uploaded Version V1.0.2.99_1.0.42
Small remark : the settings-help-files are sometimes not really helpfull : some settings are explained or explained onces are not available in the settings.
Thank you for the detailed instructions. I have been waiting for a long time to flash my R6700v3 and it finally worked. My fault on not researching the recommended routers before buying one, but my old one was starting to have a lot of issues.
Flashed with recommended starting build and then did today's bin.
Code:
Router Model Netgear R6700 v3
Firmware Version DD-WRT v3.0-r42410 std (02/17/20)
Kernel Version Linux 4.4.214 #931 SMP Sun Feb 16 10:14:59 +04 2020 armv7l
Joined: 08 May 2018 Posts: 14242 Location: Texas, USA
Posted: Mon Feb 17, 2020 16:12 Post subject:
Please report in the appropriate build release threads. This one is going to wind up being the R7800 initial device add to firmware thread at ~200 pages if nonsense continues. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Posted: Fri Mar 27, 2020 22:21 Post subject: Telnet in the age of OSX
Hi,
I want to try and flash my 6700v3 router and see that the telnet reset seems to be key to having success. However, the instructions for telnet enable seem to be old enough that they don't work.
Telnet doesn't even exist in recent versions of OSX - netconnect and SSH are available but I think I need a port number.
Anyway, I wanted to see if there was anyone who could give some advice how to get the nvram reset using a Mac.