r7800 latency is on par with kong builds, but the cpu usage for sirq on wifi interfaces is still broken and over 3x higher than kong builds and BS k3.18 builds.. if the r7800 was doing nat+qos, it still would be choking at these speeds from not enough cpu free.. keep the latency the same and fix the cpu usage, this will be finally 100% fixed for the first time..
kong r40720m firewall/qos/nat disabled, 5ghz sirq cpu load @ 320mbps:
core0: 15%
core1: 3%
ANY k4.x bs build firewall/qos/nat disabled, 5ghz sirq cpu load @ 320mbps:
core0: 60%
core1: 40%
still forced disabled/broken hostapd syslog output on many routers, but its fixed on r7800.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Thu Feb 06, 2020 17:05 Post subject:
dasnick wrote:
Working as a WAP. Coming from previous public release. Working fine, but no Wireguard.
im not sure if Wireguard is present on those units, due to small flash size ram 8MB...never thought they have it neither...
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r42287 std (02/06/20)
Kernel Version Linux 3.18.140-d4 #69203 Thu Feb 6 06:33:06 +04 2020 mips
update: CLI 42278 > 42287
reset: NO
status: Operational 3h+
errors: Nothing new for my set up...will report if something...later... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Working as a WAP. Coming from previous public release. Working fine, but no Wireguard.
im not sure if Wireguard is present on those units, due to small flash size ram 8MB...never thought they have it neither...
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r42287 std (02/06/20)
Kernel Version Linux 3.18.140-d4 #69203 Thu Feb 6 06:33:06 +04 2020 mips
update: CLI 42278 > 42287
reset: NO
status: Operational 3h+
errors: Nothing new for my set up...will report if something...later...
to tell you the truth, I believe I saw it some months ago (when it was introduced?) but never tried to configure it. Now I was interested to give it a go, and can't find it. So, not sure!
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r42287 std)
Kernel: Linux 3.10.108-d10 #37645 Thu Feb 6 05:08:05 +04 2020 mips
Status: working
Reset: No
Notes on configuration:
Client
Errors:
*1. "WPA2 Personal with SHA256" and "WPA3 Personal / SAE" does not seem to work in client mode (ie trying to connect to AP with it enabled)
2. 5Ghz wireless light is not on (2.4Ghz light works)
If 8MB Flash is an issue then I prefer that BrainSlyer remove OpenVPN (it's too slow for 8MB Routers) and have WireGuard installed. I currently setup a Travel Router Broadcom 8MB E3000 on Build 42132 with WireGuard and can get +30Mb/s. To get those speeds on OpenVPN you need a Dual-Core Arm SoC Router. _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Feb 06, 2020 22:58 Post subject:
mac913 wrote:
dasnick wrote:
Per Yngve Berg wrote:
Wireguard is located at Setup->Tunnels
this is what I get
If 8MB Flash is an issue then I prefer that BrainSlyer remove OpenVPN (it's too slow for 8MB Routers) and have WireGuard installed. I currently setup a Travel Router Broadcom 8MB E3000 on Build 42132 with WireGuard and can get +30Mb/s. To get those speeds on OpenVPN you need a Dual-Core Arm SoC Router.
id vouch for removing that (useless?) wiviz survey thing.. at least half the things on the hotspot page redundant and attainable by a simple vap on a different bridge etc.. slowly useful features are being silently stripped like hostapd syslog output _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Thank you!! 