R7000 and IPv6

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... , 35, 36, 37  Next
Author Message
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Mon Feb 03, 2020 22:35    Post subject: Reply with quote
The router is not in bridge mode but I spoofed the other ISP router to make it work. It is in auto DHCP config with static routing.

This is startup syslog.

Code:


Jan 1 01:00:11 Knet syslog.info syslogd started: BusyBox v1.31.0
Jan 1 01:00:11 Knet user.info : syslogd : daemon successfully started
Jan 1 01:00:11 Knet user.info : ipv6 : successfully started
Jan 1 01:00:11 Knet user.info : resetbutton : resetbutton daemon successfully started
Jan 1 01:00:11 Knet user.info : bridge : bridge br0 successfully added
Jan 1 01:00:12 Knet daemon.info mstpd[623]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 01:00:12 Knet daemon.info mstpd[623]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 01:00:12 Knet user.info : bridge : interface vlan1 successfully added to bridge br0
Jan 1 01:00:12 Knet user.info : bridge : interface eth1 successfully added to bridge br0
Jan 1 01:00:17 Knet user.info : bridge : interface eth2 successfully added to bridge br0
Jan 1 01:00:17 Knet user.info : syslogd : syslog daemon successfully stopped
Jan 1 01:00:17 Knet syslog.info syslogd exiting
Jan 1 01:00:18 Knet syslog.info syslogd started: BusyBox v1.31.0
Jan 1 01:00:18 Knet user.info : dropbear : ssh daemon successfully started
Jan 1 01:00:18 Knet authpriv.info dropbear[949]: Running in background
Jan 1 01:00:18 Knet daemon.info dnsmasq[966]: started, version 2.80 cachesize 1500
Jan 1 01:00:18 Knet daemon.info dnsmasq[966]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Jan 1 01:00:18 Knet daemon.info dnsmasq-dhcp[966]: DHCP, IP range 192.168.2.2 -- 192.168.2.99, lease time 1d
Jan 1 01:00:18 Knet user.info : dnsmasq : daemon successfully started
Jan 1 01:00:18 Knet daemon.info dnsmasq[966]: reading /tmp/resolv.dnsmasq
Jan 1 01:00:18 Knet daemon.info dnsmasq[966]: using nameserver 178.250.208.135#53
Jan 1 01:00:18 Knet daemon.info dnsmasq[966]: using nameserver 178.250.209.34#53
Jan 1 01:00:18 Knet daemon.info dnsmasq[966]: read /etc/hosts - 5 addresses
Jan 1 01:00:19 Knet user.info : ttraff : traffic counter daemon successfully started
Jan 1 01:00:19 Knet user.info : dnsmasq : daemon successfully stopped
Jan 1 01:00:20 Knet daemon.info httpd[1121]: httpd : httpd server (ssl support) started at port 443
Jan 1 01:00:20 Knet user.info : httpd : https daemon successfully started
Jan 1 01:00:21 Knet daemon.info dnsmasq[1128]: started, version 2.80 cachesize 1500
Jan 1 01:00:21 Knet daemon.info dnsmasq[1128]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Jan 1 01:00:21 Knet daemon.info dnsmasq-dhcp[1128]: DHCP, IP range 192.168.2.2 -- 192.168.2.99, lease time 1d
Jan 1 01:00:21 Knet daemon.info dnsmasq[1128]: reading /tmp/resolv.dnsmasq
Jan 1 01:00:21 Knet user.info : dnsmasq : daemon successfully started
Jan 1 01:00:21 Knet daemon.info dnsmasq[1128]: using nameserver 178.250.208.135#53
Jan 1 01:00:21 Knet daemon.info dnsmasq[1128]: using nameserver 178.250.209.34#53
Jan 1 01:00:21 Knet daemon.info dnsmasq[1128]: read /etc/hosts - 5 addresses
Jan 1 01:00:22 Knet user.info : wland : daemon successfully stopped
Jan 1 01:00:22 Knet user.info : wland : daemon successfully started
Jan 1 01:00:22 Knet user.info : wan : WAN is up. IP: 185.xxx.xxxx.xxx
Jan 1 01:00:22 Knet user.info : radvd : daemon successfully stopped
Jan 1 01:00:22 Knet daemon.warn radvd[931]: exiting, 1 sigterm(s) received
Jan 1 01:00:22 Knet daemon.info radvd[931]: sending stop adverts
Jan 1 01:00:22 Knet daemon.info radvd[931]: removing /var/run/radvd.pid
Jan 1 01:00:22 Knet daemon.info radvd[931]: returning from radvd main
Jan 1 01:00:22 Knet daemon.info radvd[1134]: version 2.18 started
Jan 1 01:00:22 Knet user.info : radvd : RADVD daemon successfully started
Jan 1 01:00:22 Knet user.info : process_monitor : successfully started
Jan 1 01:00:22 Knet user.info : vpn modules : vpn modules successfully unloaded
Jan 1 01:00:22 Knet user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Jan 1 01:00:22 Knet user.info : vpn modules : nf_nat_proto_gre successfully loaded
Jan 1 01:00:22 Knet user.info : vpn modules : nf_nat_pptp successfully loaded
Jan 1 01:00:26 Knet daemon.info dnsmasq-dhcp[1128]: DHCPDISCOVER(br0) 192.168.2.4 34:20:03:1c:65:8a
Jan 1 01:00:26 Knet daemon.info dnsmasq-dhcp[1128]: DHCPOFFER(br0) 192.168.2.4 34:20:03:1c:65:8a
Jan 1 01:00:27 Knet daemon.err ntpclient[1140]: Failed resolving address to hostname time.apple.com: Try again
Jan 1 01:00:27 Knet daemon.err ntpclient[1140]: Failed resolving server time.apple.com: Network is down
Jan 1 01:00:27 Knet daemon.err process_monitor[1137]: cyclic NTP Update failed (servers time.apple.com)
Jan 1 01:00:27 Knet daemon.err process_monitor[1137]: Last update failed, we need to re-update after 30 seconds
Jan 1 01:00:27 Knet daemon.debug process_monitor[1137]: We need to re-update after 3600 seconds
Jan 1 01:00:27 Knet daemon.info process_monitor[1137]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Jan 1 01:00:27 Knet user.info : nas : start nas lan
Jan 1 01:00:27 Knet user.info : nas : start nas for wl0
Jan 1 01:00:27 Knet user.info : nas : wait for network init
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPDISCOVER(br0) 192.168.2.38 00:24:c6:20:07:49
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPOFFER(br0) 192.168.2.38 00:24:c6:20:07:49
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPREQUEST(br0) 192.168.2.4 34:20:03:1c:65:8a
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPACK(br0) 192.168.2.4 34:20:03:1c:65:8a EZpad
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPREQUEST(br0) 192.168.2.4 34:20:03:1c:65:8a
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPACK(br0) 192.168.2.4 34:20:03:1c:65:8a EZpad
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPDISCOVER(br0) 192.168.2.38 00:24:c6:20:07:49
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPOFFER(br0) 192.168.2.38 00:24:c6:20:07:49
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPREQUEST(br0) 192.168.2.38 00:24:c6:20:07:49
Jan 1 01:00:30 Knet daemon.info dnsmasq-dhcp[1128]: DHCPACK(br0) 192.168.2.38 00:24:c6:20:07:49
Jan 1 01:00:37 Knet user.info : nas : NAS lan (wl0 interface) successfully started
Jan 1 01:00:37 Knet user.info : nas : start nas lan
Jan 1 01:00:37 Knet user.info : nas : start nas for wl1
Jan 1 01:00:37 Knet user.info : nas : NAS lan (wl1 interface) successfully started
Jan 1 01:00:40 Knet user.info : nas : start nas lan
Jan 1 01:00:40 Knet user.info : nas : start nas for wl0
Jan 1 01:00:40 Knet user.info : nas : start nas lan
Jan 1 01:00:40 Knet user.info : nas : start nas for wl1
Jan 1 01:00:40 Knet user.info : httpd : daemon successfully stopped
Jan 1 01:00:40 Knet daemon.info httpd[1123]: httpd : httpd server shutdown
Jan 1 01:00:40 Knet daemon.info httpd[1309]: httpd : httpd server (ssl support) started at port 443
Jan 1 01:00:40 Knet user.info : httpd : https daemon successfully started
Jan 1 01:00:40 Knet user.info : resetbutton : daemon successfully stopped
Jan 1 01:00:40 Knet user.info : resetbutton : resetbutton daemon successfully started
Jan 1 01:00:41 Knet user.info : httpd : daemon successfully stopped
Jan 1 01:00:41 Knet daemon.info httpd[1311]: httpd : httpd server shutdown
Jan 1 01:00:41 Knet daemon.info httpd[1477]: httpd : httpd server (ssl support) started at port 443
Jan 1 01:00:41 Knet user.info : httpd : https daemon successfully started
Jan 1 01:00:57 Knet daemon.debug ntpclient[1481]: Connecting to time.apple.com [17.253.108.253] ...
Feb 3 23:25:48 Knet daemon.info ntpclient[1481]: Time set from time.apple.com [17.253.108.253].
Feb 3 23:25:48 Knet daemon.info process_monitor[1137]: cyclic NTP Update success (servers time.apple.com)
Feb 3 23:25:48 Knet daemon.debug process_monitor[1137]: Restarting cron (time sync change)
Feb 3 23:25:48 Knet user.info : cron : daemon successfully stopped
Feb 3 23:25:48 Knet user.info : process_monitor : daemon successfully stopped
Feb 3 23:25:48 Knet user.info : process_monitor : successfully started
Feb 3 23:25:48 Knet user.info : cron : daemon successfully started
Feb 3 23:25:48 Knet cron.info cron[1573]: (CRON) STARTUP (fork ok)
Feb 3 23:25:48 Knet daemon.info process_monitor[1572]: process_monitor : set timer: 3600 seconds, callback: ntp_main()
Feb 3 23:25:55 Knet user.debug : ttraff: data collection started



confi2.jpg
 Description:
 Filesize:  127.19 KB
 Viewed:  2503 Time(s)

confi2.jpg



confi1.jpg
 Description:
 Filesize:  154.9 KB
 Viewed:  2503 Time(s)

confi1.jpg


Sponsor
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Tue Feb 04, 2020 8:15    Post subject: Reply with quote
walawa75 wrote:
The router is not in bridge mode but I spoofed the other ISP router to make it work. It is in auto DHCP config with static routing.


My question wasn't properly stated... I'm wondering about the physical configuration of your devices (what is plugged into what?).

Usually the ISP device is configured in bridge mode and the DDWRT device is configured as the router.

I'm also curious what version of DDWRT you're running on the R7000.
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Tue Feb 04, 2020 9:05    Post subject: Reply with quote
Hello flyzipper

Firmware is DD-WRT v3.0-r40270M kongac (07/11/19)

The r7000 is the only rooter which is plugged on the ONT. The ISP one is always off in its box.

So I missed an extra ipv6 settings on my r7000 ?
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Tue Feb 04, 2020 9:42    Post subject: Reply with quote
Btw I get these errors at startup

Jan 1 01:00:11 Knet daemon.info mstpd[623]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 01:00:11 Knet daemon.info mstpd[623]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 01:00:11 Knet daemon.info mstpd[623]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 10
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Wed Feb 05, 2020 16:23    Post subject: Reply with quote
Hello

Some news from the settings. Now I have IPv6 enabled and working in LAN but I can't reach ipv6 from wan and I can't be reached from ipv6 request.
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Wed Feb 05, 2020 21:24    Post subject: Reply with quote
I'm running out of ideas.

At this point I'd try:

1) upgrade to the latest firmware
2) reset to stock to erase any previous changes
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Thu Feb 06, 2020 9:20    Post subject: Reply with quote
Hi,

1) I upgraded to the latest std firmware yersterday

No success to use ipv6

2) I will revert to stock tomorrow and let you know.
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Thu Feb 06, 2020 22:09    Post subject: Reply with quote
For reset, I'd suggest...

telnet/ssh to device, and issue the following command...

Code:
nvram erase && reboot


... then configure manually (don't restore a backup).
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Fri Feb 07, 2020 9:56    Post subject: Reply with quote
Do you mean under ddwrt FW or when I reverted back to stock ?
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Fri Feb 07, 2020 19:25    Post subject: Reply with quote
walawa75 wrote:
Do you mean under ddwrt FW or when I reverted back to stock ?


I assumed you wanted to stay on ddwrt, so my suggestion was to reset that.
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Fri Feb 07, 2020 20:18    Post subject: Reply with quote
Well this is the news.

I did reset then reverted to stock >> IPV6 works

I went back to last std ddwrt and >> IPV6 does not work Evil or Very Mad

no address range available for DHCPv6 request via br0

This ddwrt is making me crazy !!!
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Fri Feb 07, 2020 21:02    Post subject: Reply with quote
In conclusion >> DDWRT sucks and I am going to try openwrt
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Fri Feb 07, 2020 21:09    Post subject: Reply with quote
OpenWRT's Broadcom support is crap. Your R7000 will make a nice switch or wired router, not much else. It looks like you were using an older build, anyway. IPv6 may have not even worked correctly in it to begin with. But do as you wish.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
walawa75
DD-WRT Novice


Joined: 06 Jun 2014
Posts: 25

PostPosted: Fri Feb 07, 2020 22:01    Post subject: Reply with quote
Now I use the last fw and the ipv6 feature still does not work !! Does really r7000 works with ddwrt ipv6 ?
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Fri Feb 07, 2020 22:11    Post subject: Reply with quote
walawa75 wrote:
Now I use the last fw and the ipv6 feature still does not work !! Does really r7000 works with ddwrt ipv6 ?


I use an R7000 and IPv6 works for my Rogers connection in Ontario Canada... gets a 19/20 on https://ipv6-test.com/

(only the IPv6 hostname is lacking)

Currently running DD-WRT v3.0-r42287 std (02/06/20), but previous versions in the last 2 years have also done the trick.
Goto page Previous  1, 2, 3 ... , 35, 36, 37  Next Display posts from previous:    Page 36 of 37
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum