Posted: Mon Feb 03, 2020 17:01 Post subject: DIR0860L Rev A1
Flash my DIR-860L A1 for the first time. I came from OEM firmware DIR860LA1_FW111b01_beta.bin and flashed DD-WRT f/w factory-to-ddrt.bin for the Rev A1 version. Seems the router is bricked? I can't get to either ip address dlinkrouter.local./ or 192.168.0.1
The router flashed the f/w rebooted after 120 seconds, then when it came back on, when to the 120 second page again, counted down to 0, and stayed there.
After awhile, I did the 30/30/30 hard reset, and now the router just stays on with a solid orange light coming from the top LED/Power indicator. no light from the "globe" LED indicator.
Joined: 16 Nov 2015 Posts: 6408 Location: UK, London, just across the river..
Posted: Mon Feb 03, 2020 17:27 Post subject:
bad.....very, very bad...
1st. yep you are new...and you haven't read a single line, about "how to flash your router with DDWRT"... after flash your router is on 192.168.1.1 not the default 0.1...
2nd.30/30/30 is bad idea on most of the modern routers
in your case as it shows router is stacked in tftp mode/recovery room...
3rd. if normal reset button is not working and you cant see your router at 192.168.1.1, than serial is needed...
4th. best way to start is reading
https://forum.dd-wrt.com/wiki/index.php/Main_Page _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
By doing a 30/30/30 you may have put the router in recovery mode. Set a static up on on your nic.
192.168.0.9, 255.255.255.0, 192.168.0.1
Then open your browser to 192.168.0.1
Or google d-link emergency room. _________________ I am far from a guru, I'm barely a novice.
SO i have reads everything i can after fixing via emergency room - but i just can't find the router via DD-WRT default IP.
any way to get as step-by-step how to make this work? I just want this as a repeater. So for being as PIA but now I am hg=ome, isolated, frustrated and bored af - just want thias to wor. I don't think this is as difficult as I am making it! ugh!