Posted: Mon Feb 03, 2020 17:01 Post subject: DIR0860L Rev A1
Flash my DIR-860L A1 for the first time. I came from OEM firmware DIR860LA1_FW111b01_beta.bin and flashed DD-WRT f/w factory-to-ddrt.bin for the Rev A1 version. Seems the router is bricked? I can't get to either ip address dlinkrouter.local./ or 192.168.0.1
The router flashed the f/w rebooted after 120 seconds, then when it came back on, when to the 120 second page again, counted down to 0, and stayed there.
After awhile, I did the 30/30/30 hard reset, and now the router just stays on with a solid orange light coming from the top LED/Power indicator. no light from the "globe" LED indicator.
By doing a 30/30/30 you may have put the router in recovery mode. Set a static up on on your nic.
192.168.0.9, 255.255.255.0, 192.168.0.1
Then open your browser to 192.168.0.1
Or google d-link emergency room. _________________ I am far from a guru, I'm barely a novice.
SO i have reads everything i can after fixing via emergency room - but i just can't find the router via DD-WRT default IP.
any way to get as step-by-step how to make this work? I just want this as a repeater. So for being as PIA but now I am hg=ome, isolated, frustrated and bored af - just want thias to wor. I don't think this is as difficult as I am making it! ugh!