I am not sure the wl2 even works on that one, someone else who knows can chime in.
I'll have to look at these, but this is the exact way it was always setup before I updated and they worked just fine. I'm hoping that updating to this version didn't do something to kill the wireless.
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Thu Dec 19, 2019 9:05 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r41686 std (12/10/19)
Kernel Version Linux 4.4.206 #440 SMP Mon Dec 9 15:10:29 +04 2019 armv7l
update: CLI 40270 > 41686
reset: YES
status: Operational 24h+
errors: Not heaving fun with Br and VLANS on GUI...waiting for the next build as i saw on SVN some fixes...
dont have WI-FI on this unit Ethernet Gateway/VPN only..
Otherwise as a basic set up it works but i need my 4 Vlans on sepp Br's...via GUI as im a nerd... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
I am not sure the wl2 even works on that one, someone else who knows can chime in.
I'll have to look at these, but this is the exact way it was always setup before I updated and they worked just fine. I'm hoping that updating to this version didn't do something to kill the wireless.
I have just tried "mixed" on 2,4 Ghz (Netgear r6300v2) and devices are not able to connect
I am not sure the wl2 even works on that one, someone else who knows can chime in.
I'll have to look at these, but this is the exact way it was always setup before I updated and they worked just fine. I'm hoping that updating to this version didn't do something to kill the wireless.
I have just tried "mixed" on 2,4 Ghz (Netgear r6300v2) and devices are not able to connect
My devices connect just fine, but the speeds are completely messed up. I have Gigabit speeds, and the R8000 totes 3200mb wireless speeds, and I'm getting about 5mbps on the 2.4 band and only like 25 on the 5 band. Anyone else have any ideas? Should I make a separate post for this?
Joined: 08 May 2018 Posts: 14244 Location: Texas, USA
Posted: Thu Dec 19, 2019 17:32 Post subject:
I forget, so I will ask out in the open. Isn't the R8000 one of the ones that the 3rd radio doesn't even work on in DD-WRT? Opening another thread about an issue that there's probably already at least one, if not five threads out there about.... sure, why not. I'm not going to glean the forum for every post about the device to post links for you. Feel free to do some research. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Router Model Asus RT-AC3100
Firmware Version DD-WRT v3.0-r41468 std (11/06/19)
Kernel Version Linux 4.4.199-rc1 #214 SMP Wed Nov 6 08:09:49 +04 2019 armv7l
I upgraded to 41686 using standard asus_rt-ac3100-firmware.trx firmware. All seemed normal but now 5 GHz will not accept new connections after 2 days. Reboot cleared the issue for 2 days but returned. Backed off to 41468 which was working without error. Yes, GTK is at default of 3600. 2.4 and 5 GHz are set for limited Mixed (G, N, AC only). VHT80 on 5 GHz.
Router/Version: Linksys WRT54GS v1.1
File: dd-wrt.v24_mini_generic.bin (it's possible it was "dd-wrt.v24_mini_wrt54gs.bin")
Firmware: r41686 (Dec 10th 2019)
Mode: AP
Reset: Yes (I held reset button for 30+ seconds after flashing this firmware and then manually configured the router to my liking)
I figured I would mention one small issue that I noticed after running I think it was 8 days with this firmware. it seems the section that shows the lease time which renews after 7 days, I noticed when it reached the full 7 days(like how it counts down), the counter did not renew like usual and was just zero's there basically (like it ran out of time). but... the router still seemed to function like normal as far as I could tell. I just thought I would mention it.
EDIT: it appears this DHCP WAN renewal is a known bug and is not likely to be fixed anytime soon. so if anyone has issues with DD-WRT in that regard they might have to switch to another firmware like FreshTomato etc to resolve it. _________________ Primary Router: Linksys WRT54GS v1.1 /w dd-wrt.v24_mini_generic (r46640 May 13th 2021) ; new Panasonic capacitors Feb 11th 2020 | Backup Router: Linksys WRT54GS v6 /w dd-wrt.v24_micro_generic (r46640 May 13th 2021)