MAC filtering broken if a virtual interface is configured

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
devsk
DD-WRT Novice


Joined: 25 Aug 2016
Posts: 35

PostPosted: Sat Nov 23, 2019 1:45    Post subject: MAC filtering broken if a virtual interface is configured Reply with quote
So, I have a wl0.1 configured to provide my guests an internet connection on a separate network. Works very well!

But now I notice that MAC filtering is broken on both wl0 and wl0.1. I tried both modes: black list (don't allow MACs in the list) and white list (allow only the MACs in the list), and it just ignores the list completely.

MAC filtering works fine on interfaces where virtual interface is not present e.g. wl1 (5Ghz)

This is on TP-Link Archer C9 v3.

Anybody got any ideas?
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2600
Location: Texas, USA

PostPosted: Sat Nov 23, 2019 1:51    Post subject: Reply with quote
Not without knowing what firmware revision you're using.
_________________
E4200 v1 DD-WRT 41663 mega (12/06/19) (K3.x)
R7000P DD-WRT 40270M kongac
E4200 v1 FreshTomato 2019.3
E4200 v1 FreshTomato 2019.4.development
R7000 FreshTomato 2019.4.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.5
devsk
DD-WRT Novice


Joined: 25 Aug 2016
Posts: 35

PostPosted: Sat Nov 23, 2019 3:46    Post subject: Reply with quote
I am running the Nov 11, 2019 snapshot (11-11-2019-r41517). I was previously running Jul or Aug snapshot and updated to see if the issue was fixed in later versions.
devsk
DD-WRT Novice


Joined: 25 Aug 2016
Posts: 35

PostPosted: Tue Nov 26, 2019 6:50    Post subject: Reply with quote
Anyone got any info on this?
gabrielra
DD-WRT Novice


Joined: 21 May 2015
Posts: 29

PostPosted: Mon Dec 02, 2019 12:23    Post subject: Reply with quote
I have the same issue. And it's broken since long time.
devsk
DD-WRT Novice


Joined: 25 Aug 2016
Posts: 35

PostPosted: Tue Dec 03, 2019 3:56    Post subject: Reply with quote
gabrielra wrote:
I have the same issue. And it's broken since long time.
Yeah, I did not realize it was broken until recently.
devsk
DD-WRT Novice


Joined: 25 Aug 2016
Posts: 35

PostPosted: Tue Dec 03, 2019 16:39    Post subject: Reply with quote
IS there a place where we can file bugs?
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 4337
Location: Netherlands

PostPosted: Tue Dec 03, 2019 17:12    Post subject: Reply with quote
devsk wrote:
IS there a place where we can file bugs?


point 12

Below some pointers which might help to get the best out of DDWRT and out of the forum:
1. Research your router, start with the supported devices wiki:
https://wiki.dd-wrt.com/wiki/index.php/Supported_Devices .
2. In the supported devices wiki you can see if your router is supported and what architecture your router has and if you are lucky also an install guide/wiki.
3. Post in the right forum, from the former step you can see if your router is Broadcom, Qualcomm/Atheros, Marvell or other, use that forum to post router specific questions, for networking questions post in the Advanced Networking forum and for other things in the General Questions forum.
4. When posting always state router model, build number and when applicable the Kernel version.
Describe your problem and how you think it can be solved.
Give as much detail as you can also provide your network setup if applicable.
For your Network setup, state what wiki you have used: https://wiki.dd-wrt.com/wiki/index.php/Linking_Routers
5. When posting pictures make sure the maximum width is not more than 600 pixels.
6. Do not hijack a thread, meaning do not post your own problem in someone else's thread. Just start your own thread.
7. If your post is answered and your problem solved, mark your thread with [SOLVED] (the header of your first post).
8. Do NOT use the router database, builds can be found at:
https://dd-wrt.com/support/other-downloads/?path=betas%2F2019%2F
All builds are beta including those from the router database.
9. Before uploading a new build to your router, research the build by looking in the build threads.
This is an example of a build thread for build 41328 for Broadcom routers:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321699&highlight=41328
Search build threads with the search function and search on build number.
10. Use the build threads from the former step to report success or problems.
11. For older Broadcom routers (Linksys WRT54 and E series) read the peacock thread although some of it is outdated: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=51486
Builds can be found in the Broadcom directory for Linux kernel 2.4, in Broadcom_K26 for Linux K2.6 and in Broadcom_K3X for Linux K3.X.
12. If you are sure you have discovered a bug, after asking and querying the forum, you can report a real bug in the bug tracker: https://svn.dd-wrt.com/
This is also the place where the commits/changes to the source are administrated.
13. Recommended reading:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=54845
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=54959
14. If you are happy with DDWRT and want it to live on then donate:
https://dd-wrt.com/donations/

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
Install guide Linksys EA6900: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=291230
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2600
Location: Texas, USA

PostPosted: Tue Dec 03, 2019 19:16    Post subject: Reply with quote
Yes, please, add another bug ticket about a previously reported issue. I will have to find it, but I'm fairly certain this was reported already.
_________________
E4200 v1 DD-WRT 41663 mega (12/06/19) (K3.x)
R7000P DD-WRT 40270M kongac
E4200 v1 FreshTomato 2019.3
E4200 v1 FreshTomato 2019.4.development
R7000 FreshTomato 2019.4.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.5
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum