Posted: Thu Nov 28, 2019 11:14 Post subject: NTFS support
I am bit of struggling with accessing 1 TB NTFS drive over USB port in DIR-882. It is shows NTFS unsupported file system. I have used recent broly build. Do I need to do something specific to enable NTFS HDD?
I'm actually using a Motorola MR2600 (AC2600) which is supposed to have the same specs as the D-LINK DIR-882. I noticed that after I reverted back to the factory firmware, all my previous settings were still present. I'm guessing this was stored in the NVRAM which wasn't cleared out. Could the router be acting unstably because the NVRAM wasn't cleared?
Joined: 08 May 2018 Posts: 2600 Location: Texas, USA
Posted: Sat Nov 30, 2019 7:02 Post subject:
That's possible. The other possibility is the by-product of flashing a firmware that is not 100% specifically for your router. This is why you have to reset after flashing DD-WRT using the appropriate method for your router. This doesn't necessarily mean a 30/30/30, as that is usually for older WRT54* type routers. _________________ E4200 v1 DD-WRT 41663 mega (12/06/19) (K3.x)
R7000P DD-WRT 40270M kongac
E4200 v1 FreshTomato 2019.3
E4200 v1 FreshTomato 2019.4.development
R7000 FreshTomato 2019.4.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.5