New Build: 11-21-2019-r41586

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2, 3, 4, 5, 6  Next
Author Message
mebj
DD-WRT Novice


Joined: 07 May 2019
Posts: 8

PostPosted: Mon Nov 25, 2019 10:45    Post subject: Re: Samba Services does not start automatically Reply with quote
mxplea10 wrote:
Since upgrading the Linksys WRT3200ACM from firmware DD-WRT v3.0-r39654 std (04/25/19) to firmware DD-WRT v3.0-r41586 std (11/21/19), the Samba Server will not start automatically. If the power is lost or if the router is rebooted, I must go to Services > NAS > Apply Settings & Save to start the Samba Services. No setting changes have to be made before selecting Apply Settings and Save to start the Samba Services again.

Has anyone else had this issue and is there anything that can be done to fix it?


This seems to be a common problem, I ran into it on build 41517 and have posted about it at that thread.
What you can test is to use a startup script similar to what is described here: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1003715&sid=bb907541d94cf08e3a33bc6881814bae
You can find a couple of suggestions there.
Sponsor
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Tue Nov 26, 2019 20:46    Post subject: Reply with quote
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.info httpd[1788]: httpd : Authentication fail
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.err httpd[1788]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases

_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
ellick
DD-WRT User


Joined: 28 Mar 2016
Posts: 265

PostPosted: Tue Nov 26, 2019 20:52    Post subject: Reply with quote
gufus wrote:
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.info httpd[1788]: httpd : Authentication fail
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.err httpd[1788]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases


I see that a lot in my system log but wasn't sure if it was when the GUI went down of if that's the message from telnet when I log in via that.
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Tue Nov 26, 2019 21:02    Post subject: Reply with quote
ellick wrote:
gufus wrote:
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.info httpd[1788]: httpd : Authentication fail
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.err httpd[1788]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases


I see that a lot in my system log but wasn't sure if it was when the GUI went down of if that's the message from telnet when I log in via that.


That error has been around 4 a LONG TIME Sad

_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Tue Nov 26, 2019 21:09    Post subject: Reply with quote
Interface
MAC Address
60:38:E0:B7:F8:E2
Chipset
88W8964 802.11ac
Radio
Radio is On
Mode
WDS Station
Network
AC/N-Mixed
SSID
gypsynet_5g
Channel
36 + 50 (5180 MHz VHT160)
Busy Time
2628387 ms
Active Time
14802379 ms
Channel Quality
83%
TX Power
20 dBm
Rate
Auto
ACK Timing
N/A
Encryption - Interface ath0
Enabled, WPA2-PSK
Connected Clients
1

Wireless Packet Info
Received (RX)
100%
57123 OK, no error
Transmitted (TX)
100%
42815 OK, no error

Wireless Nodes
Access Point & Clients
MAC Address Radioname Interface Uptime TX Rate RX Rate Info Signal Noise SNR Signal Quality
60:38:E0:B9:2D:2A ath0 022:52:26 2340M 1950M VHT160SGI -67 -101 34
66%

_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Tue Nov 26, 2019 21:33    Post subject: Reply with quote
gufus wrote:
ellick wrote:
gufus wrote:
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.info httpd[1788]: httpd : Authentication fail
Nov 26 12:19:53 DD-WRT b7:f8:e1 daemon.err httpd[1788]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases


I see that a lot in my system log but wasn't sure if it was when the GUI went down of if that's the message from telnet when I log in via that.


That error has been around 4 a LONG TIME Sad


It's because of the browser used. Nothing new.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
ellick
DD-WRT User


Joined: 28 Mar 2016
Posts: 265

PostPosted: Tue Nov 26, 2019 21:59    Post subject: Reply with quote
kernel-panic69 wrote:


It's because of the browser used. Nothing new.


Which browser? I'm using Firefox 64big and see the error in the system log. Though it could be from the Kiwi browser which I prefer on my Android tablet.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Tue Nov 26, 2019 22:20    Post subject: Reply with quote
Your browser is too new. Even the latest Firefox ESR does it. Only browser I know for sure that doesn't do it is Firefox ESR 52.9.0. I think there may be others (Safari, Opera), but I would have to fire up my E4200. It's taking a break so I can thoroughly test the R7000 on FT.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Tue Nov 26, 2019 22:25    Post subject: Reply with quote
ellick wrote:
kernel-panic69 wrote:


It's because of the browser used. Nothing new.


Which browser? I'm using Firefox 64big and see the error in the system log. Though it could be from the Kiwi browser which I prefer on my Android tablet.


All browsers

I's dd-wrt NOT the browser

_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Tue Nov 26, 2019 22:31    Post subject: Reply with quote
gufus wrote:
ellick wrote:
kernel-panic69 wrote:


It's because of the browser used. Nothing new.


Which browser? I'm using Firefox 64big and see the error in the system log. Though it could be from the Kiwi browser which I prefer on my Android tablet.


All browsers

I's dd-wrt NOT the browser


Older browsers like FF ESR 52.9.0 Do NOT produce this message. I used it routinely for months. Now that I use the latest ESR, it does it. But to be clear, we are both correct. It IS dd-wrt and it's haphazard support for older browsers, among other questionable things.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Tue Nov 26, 2019 22:40    Post subject: Reply with quote
kernel-panic69 wrote:
gufus wrote:
ellick wrote:
kernel-panic69 wrote:


It's because of the browser used. Nothing new.


Which browser? I'm using Firefox 64big and see the error in the system log. Though it could be from the Kiwi browser which I prefer on my Android tablet.


All browsers

I's dd-wrt NOT the browser


Older browsers like FF ESR 52.9.0 Do NOT produce this message. I used it routinely for months. Now that I use the latest ESR, it does it. But to be clear, we are both correct. It IS dd-wrt and it's haphazard support for older browsers, among other questionable things.


yes Laughing

_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Wed Nov 27, 2019 1:02    Post subject: Reply with quote
Waterfox Classic, Pale Moon, Portable Legacy 45 and 52, or SeaMonkey 2.49.5 should behave like older FF; the last two are ESR.
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 438

PostPosted: Wed Nov 27, 2019 10:53    Post subject: Reply with quote
Using Windows 8.1 with latest version of Firefox (70.0.1 64 bit) I opened the GUI to temporarily turn off OpenVPN client. The GUI was frozen and would not respond. Closed Firefox and opened Waterfox (2019.10 Classic 64 bit) and the GUI was fully functional with no other actions required other than the browser change.

Since I normally use Waterfox in both Linux and Windows I have had no trouble with GUI for several releases until I turned on QoS which caused the GUI to lockup after a couple of hours (Waterfox). Turned QoS off and haven't had any problems with GUI . . . until I used Firefox this morning. GUI problems seem to depend on my setup selections and/or my browser preference.
Kailen
DD-WRT Novice


Joined: 07 Dec 2016
Posts: 8

PostPosted: Thu Nov 28, 2019 14:07    Post subject: So good so far Reply with quote
Everything has been working great, updated using incognito chrome. Except since version r41517, wireless "Sensitive Range (ACK Timing)" has disappeared from the GUI wireless options. I also seem to have duplicate dnsmasq requesting connections 2 or 3 times.
_________________
------------------------
Linksys WRT1900ACv2


Last edited by Kailen on Sat Nov 30, 2019 14:03; edited 1 time in total
7heblackwolf
DD-WRT User


Joined: 21 Nov 2019
Posts: 66

PostPosted: Fri Nov 29, 2019 5:32    Post subject: Reply with quote
DATABLOCK wrote:
Successful flash, all functions working as expected.


Well.. this is my first comment after 6 years of dd-wrt use and wandering around the forum for a long time... anyways:

Anyone knows if DNSSEC "Cache DNSSEC data" option was fixed? I'm on r40634 and makes me feel that eventually that cache "overflows" and internet stops working for web browsing. At first seems to work fine, but after 2-5 hs, internet is ded.

Validate DNS Replies (DNSSEC) & Check unsigned DNS replies seems to work fine. And tests shows correct functioning.

Also: What about CAKE shaper? Had to use PIE in my build since works pretty fine (went from F to B score) and doesn't spikes connection with the same policies. CAKE supposedly came to fix bufferbloat, but it's too hard/unstable to make it work fine. Had a long time and came to the conclusion to give a try to PIE or fallback to the oldie but goodie FQ_CODEL.

Cheers!

r40634 WRT3200ACM
Goto page Previous  1, 2, 3, 4, 5, 6  Next Display posts from previous:    Page 3 of 6
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum