Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
7. New Broadcom build option for 8MB+ K2.x devices (limited currently):
broadcom_K3X_mipsel32r1 [BS has tested on a WRT600N v1.1]
Issues, observations, and/or workarounds reported: 1.Trendnet 81*DRU models are missing factory-to-flash 2.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 3.WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) 4.K2.6 builds are broken since 38253(?) (GUI issues):6538 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Wed Oct 30, 2019 14:34 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41418_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r41418 mega (10/30/19)
Kernel: Linux 3.10.108-d8 #192 Wed Oct 30 13:26:57 +04 2019 mips
Mode: AP w/USB
Previous: r41379
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-41418_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r41418 mega (10/30/19)
Kernel: Linux 3.10.108-d8 #192 Wed Oct 30 13:26:57 +04 2019 mips
Mode: Router/OpenVPN client
Previous: r41379
Reset?: N
Status: Working
Flashed from gui. Syslogs clean. Up 30 minutes. Wait to see if timer/rekey issue reappears as in previous versions.
Joined: 08 May 2018 Posts: 14223 Location: Texas, USA
Posted: Wed Oct 30, 2019 15:55 Post subject: Cisco Linksys E4200 v1
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-41418_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r41418 mega (10/30/19)
Kernel: Linux 3.10.108-d8 #192 Wed Oct 30 13:26:57 +04 2019 mips
Previous: DD-WRT v3.0-r41408 mega (10/28/19)
Reset: No
Mode: Gateway / AP - QoS (HFSC+FQ_CODEL_FAST)
Uptime: ~ 15 min
Status: OK
Issues / Errors: Nothing new to report. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Router Model: Linksys EA6700
Firmware Version: DD-WRT v3.0-r41418 std (10/30/19)
Kernel Version: Linux 4.4.198 #194 SMP Wed Oct 30 08:44:55 +04 2019 armv7l
Uptime: 4:06
Mode: 2 x Gateway, 1 x AP
Status: Working no issue found
Router Model: Linksys EA6400
Firmware Version: DD-WRT v3.0-r41418 std (10/30/19)
Kernel Version: Linux 4.4.198 #194 SMP Wed Oct 30 08:44:55 +04 2019 armv7l
Uptime: 4:06
Mode: Gateway
Status: Working no issue found
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41418 std (10/30/19)
Kernel: Linux 4.4.198 #194 SMP Wed Oct 30 08:44:55 +04 2019 armv7l
Previous: r41379
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 5hrs 19min
Temperatures: CPU 66.4 °C / WL0 47.3 °C / WL1 53.0 °C
Router Model / Version: Dlink DIR-882 A1
File: dlink-dir882-a1-webflash.bin
Firmware: DD-WRT v3.0-r41418 std (10/30/19)
Kernel: Linux 4.14.151 #157 SMP Wed Oct 30 12:53:50 +04 2019 mips
Previous: DD-WRT v3.0-r41375 std (10/22/19)
Reset: No
Mode: Gateway / AP
Uptime: ~ 14 hours
Status: Seems to work
Issues / Errors: Webgui is unacceptable after a while. When trying to reboot from telnet nothing happens.
ping keeps working. see also ticket #6873 https://svn.dd-wrt.com/ticket/6873
Router Model / Version: Dlink DIR-882 A1
File: dlink-dir882-a1-webflash.bin
Firmware: DD-WRT v3.0-r41418 std (10/30/19)
Kernel: Linux 4.14.151 #157 SMP Wed Oct 30 12:53:50 +04 2019 mips
Previous: DD-WRT v3.0-r41375 std (10/22/19)
Reset: No
Mode: Gateway / AP
Uptime: ~ 14 hours
Status: Seems to work
Issues / Errors: Webgui is unacceptable after a while. When trying to reboot from telnet nothing happens.
ping keeps working. see also ticket #6873 https://svn.dd-wrt.com/ticket/6873
Wrong forum, post in the railink forum and smaller pictures please.
The dir-882 is a problematic router. Read the posts in the railink forum. _________________ I am far from a guru, I'm barely a novice.
Joined: 18 Mar 2014 Posts: 12889 Location: Netherlands
Posted: Thu Oct 31, 2019 12:13 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r41418 std (10/30/19)
Kernel Version: Linux 4.4.198 #194 SMP Wed Oct 30 08:44:55 +04 2019 armv7l
Upgraded: DD-WRT v3.0-r40932 std (09/07/19) via telnet (update via GUI or ddup –flash-latest not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: Yes, before and after (Erase NVRAM and WPS reset)
Configuration: AP, DHCP server, 2,4GHz wireless running, 5GHz running, some static leases and some port range forwarding, SFE on, NVRAM size just over 32K (NVRAM size should not be a problem with the Xvortex CFE)
Status: Up and stable for 1 day, excellent wireless speed and range, WAN throughput 40/4 (is my ISP's maximum)
Errors: none so far
Router/Version: Archer C1900
Mode: Gateway / AP
File: archer-c1900-webflash.bin
Kernel: Linux 4.4.198 #196 SMP Wed Oct 30 08:59:12 +04 2019 armv7l
Status: Reset after flashing and it's been up and running for 21 hours and so far everything is working fine. I might flash my E3200 a bit later. If I do I will edit this post if it's all good.
Router Model / Version: Dlink DIR-882 A1
File: dlink-dir882-a1-webflash.bin
Firmware: DD-WRT v3.0-r41418 std (10/30/19)
Kernel: Linux 4.14.151 #157 SMP Wed Oct 30 12:53:50 +04 2019 mips
Previous: DD-WRT v3.0-r41375 std (10/22/19)
Reset: No
Mode: Gateway / AP
Uptime: ~ 14 hours
Status: Seems to work
Issues / Errors: Webgui is unacceptable after a while. When trying to reboot from telnet nothing happens.
ping keeps working. see also ticket #6873 https://svn.dd-wrt.com/ticket/6873
Wrong forum, post in the railink forum and smaller pictures please.
The dir-882 is a problematic router. Read the posts in the railink forum.
Thank you for pointing it out.
I think a photo can show the problem much easier then describing it. next time i'll use smaller ones.
as you see in ticket #6873 this problem is not only for the dir-882. it used to work fine with previous builds and now it doesn't.
describing this router as problematic is just avoiding the problem.
Router/Version: Asus RT-AC68U rev C1
Firmware: DD-WRT v3.0-r41418
Kernel: Linux 4.4.198 #194 SMP Wed Oct 30 08:44:55 +04 2019 armv7l
Mode: Gateway /AP
Reset: No, flashed from command line
Status: Working well after 24h _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
