egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
|
Posted: Thu Oct 24, 2019 7:31 Post subject: |
|
You can just upgrade via the GUI.
To be on the safe side, reset to defaults before upgrading.
After upgrading, telnet to your router and do:
Code: | nvram erase && reboot | (This is the most thorough form of resetting)
Then put your settings in manually do not restore from a backup.
I recommend the resetting as you are coming from an older build and it is nice to start fresh, but it probably will work without it too
Builds can be found at: https://dd-wrt.com/support/other-downloads/?path=betas%2F2019%2F
The 41328 looks fine but always check the build threads and report succes or failure in the build threads
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321699&highlight=41328 _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|