I have a 1043ND v1 that was bricked a while ago (18 months or so). I tried serial and no luck. I decided it was not worth debricking. The 1043ND v1 is notorious for having very unstable wifi, dropping connections, rebooting, short range, etc.
Look at upgrading to something like the TP-Link Archer C7, it is AC1750, much faster SoC, more RAM, bigger flash. Very stable. Almost as stable as my ancient D-Link DIR-615 C1 and E3. They are the most stable routers I have ever owned. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one, I am trying to update them.
TP-Link Archer C7 v2 x2 - WDS AP, WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - WDS Station
Linksys WRT400N - bricked
D-Link 615 C1 x 4 - not used
D-Link 615 E3 x 2 - not used
D-Link 825 B1 - WDS Station
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - WDS Station
TP-Link 1043nd v1, inactive, unstable hardware
UBNT loco M2 x2 - airOS
Asus N66U - backup Gateway
Netgear r6300 v1 - AP
Linksys E2500 - not used
Linksys EA2700 - not used
Linksys 160N v3 x2 - not used
Netgear WNDR3700v3 - not used
UBNT EdgeRouter X - Gateway, DHCP, QoS
For the tips to choice suitable version,
If you need SNMP, "R36104"(2018-06-10) is the last version works for 1043ND v1.
Without SNMP, try those versions beyond "R39230", which's removed OpenSSL / SNMP to shrink their size into the 8MB ROM.
But ALL those versions beyond R33375, you won't be able to upgrade them just via the WebUI, even those shrank beyond "R39230".
The right way of doing upgrade of TL-WR1043 v1 is:
copy /b boot.bin+factory-to-ddwrt.bin fullflash.bin
...and you have to serve the resulting fullflash.bin file over http.
mtd -f write fullflash.bin fullflash
...but first you have to have a copy of your boot.bin.
But I tested it for several times, and 1043ND v1 always rebooted immediately after it got image.bin via HTTP or SCP.
Maybe the rootfs size is too small for the image file, only 6528KB.
Current dd-wrt version on 1043ND v1 is r41375.