Netgear AC1900 Model: R7000 lan ports disabled not working

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
View previous topic :: View next topic  
Author Message
User4286
DD-WRT Novice


Joined: 16 Oct 2019
Posts: 2
PostPosted: Wed Oct 16, 2019 16:40    Post subject: Netgear AC1900 Model: R7000 lan ports disabled not working Reply with quote
I just set up this router out of the box. I have not touched any of the settings beyond setting up the wifi and security for same. All the screens I can see show enabled (DHCP enabled). I don't see anything that is disabled yet when I connect my ARLO via an ethernet cable I get an AMBER light on the LAN port.

Please advise.
Back to top View user's profile Send private message
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 7237
Location: Netherlands
PostPosted: Wed Oct 16, 2019 18:21    Post subject: Reply with quote
And what version of DDWRT have you uploaded?

Did you do an:
Code:
nvram erase && reboot
from CLI after uploading DDWRT?

P.S You are posting this question in the wrong forum
_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top View user's profile Send private message
User4286
DD-WRT Novice


Joined: 16 Oct 2019
Posts: 2
PostPosted: Wed Oct 16, 2019 18:41    Post subject: Netgear AC1900 Model: R7000 lan ports disabled not working Reply with quote
I did not do a nvram erase and reboot from CLI.

How do I do that?

And where on the forum should I be posting?

Thanks!
Back to top View user's profile Send private message
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7217
Location: Columbus, Ohio
PostPosted: Wed Oct 16, 2019 22:39    Post subject: Reply with quote
I moved it to the correct forum.
Open a telnet window, type: telnet 192.168.1.1
The user name is root and the password is whatever you have set it to.

Then type: nvram erase, hit enter
Then type: reboot, hit enter.
_________________
I am far from a guru, I'm barely a novice.
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum