New Build: 10-12-2019-r41303

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Sun Oct 13, 2019 4:51    Post subject: New Build: 10-12-2019-r41303 Reply with quote
ftp://ftp.dd-wrt.com/betas/2019/10-12-2019-r41303/

https://dd-wrt.com/support/other-downloads/?path=betas%2F2019%2F10-12-2019-r41303%2F

Firmware Version
DD-WRT v3.0-r41303 std (10/12/19)
Kernel Version
Linux 4.9.196 #1345 SMP Sat Oct 12 11:07:47 CEST 2019 armv7l

WEBFlashed to both partitions on my WRT1900ACSv2

VPN working, Samba working, NAS working, DLNA working.

WiFi NOT tested.

_________________
WRT1900ACSv2
Sponsor
Argenis
DD-WRT User


Joined: 18 Feb 2019
Posts: 159

PostPosted: Sun Oct 13, 2019 7:02    Post subject: Re: New Build: 10-12-2019-r41303 Reply with quote
DaveI wrote:
ftp://ftp.dd-wrt.com/betas/2019/10-12-2019-r41303/

https://dd-wrt.com/support/other-downloads/?path=betas%2F2019%2F10-12-2019-r41303%2F

Firmware Version
DD-WRT v3.0-r41303 std (10/12/19)
Kernel Version
Linux 4.9.196 #1345 SMP Sat Oct 12 11:07:47 CEST 2019 armv7l

WEBFlashed to both partitions on my WRT1900ACSv2

VPN working, Samba working, NAS working, DLNA working.

WiFi NOT tested.


Not working on 3200ACM. It flashes without issues, but after about 15 minutes the connection is lost, the WiFi doesn't work, and upon install, on my setup with HTTPS only connectivity, it doesn't log in at all, either wired or wireless.
dyilmaz
DD-WRT Novice


Joined: 26 Aug 2016
Posts: 49

PostPosted: Sun Oct 13, 2019 8:21    Post subject: Re: New Build: 10-12-2019-r41303 Reply with quote
Same problems happened on my WRT1900ACSv2.
The last two releases have serious problems.

Quote:


Not working on 3200ACM. It flashes without issues, but after about 15 minutes the connection is lost, the WiFi doesn't work, and upon install, on my setup with HTTPS only connectivity, it doesn't log in at all, either wired or wireless.
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Sun Oct 13, 2019 8:28    Post subject: Re: New Build: 10-12-2019-r41303 Reply with quote
My 1900ACSv2 is still up and running without issues for my setup...

It might help for those that are having issues to open a TICKET. That way Brainslayer will see it and confirm one way or the other whether an issue exists.


dyilmaz wrote:
Same problems happened on my WRT1900ACSv2.
The last two releases have serious problems.

Quote:


Not working on 3200ACM. It flashes without issues, but after about 15 minutes the connection is lost, the WiFi doesn't work, and upon install, on my setup with HTTPS only connectivity, it doesn't log in at all, either wired or wireless.

_________________
WRT1900ACSv2
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Sun Oct 13, 2019 13:37    Post subject: Reply with quote
someone with a cable needs to do this and send a log of it to bs....or a ticket something is crashing this firmware i can get the GUI for a second as with the last build but its a little worse with this one. I cant find my TTL cable and ive went through some of my misc Stuff boxes and well its almost time to go to work now so someone has to pick up this torch.

1900ac v1 NO GO!

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Sun Oct 13, 2019 16:22    Post subject: Reply with quote
PMO,

I just woke up and saw your post...

I found the problem...Or at least part of the problem...

I don't run QOS or have Wireless turned on and I know these are popular with most (All?)...

So I first turned on QOS (HTB/CAKE)...Rebooted and my router still seemed to be running fine...
So then I ENABLED WIFI on 2.4 and 5GHZ and rebooted...Immediately DHCP was not running.
I turned WIFI back OFF on 2.4GHz and 5GHZ and rebooted and immediately DHCP was running again (Still with QOS/CAKE Running). BTW my PC that I used had a Static IP so that's how I stayed connected across the network...So the problem as far as my WRT1900ACSv2 is ENABLING THE WIFI...Which is why I did not have the problem as I did not have my WIFI ENABLED (As I don't use WiFi)...

To confirm the WIFI was the PROBLEM...I made sure QUOS/CAKE was NOT the issue as I made sure it was OFF and then reenabled WIFI and rebooted and upon reboot the DHCP was not running...So the problem is having WIFI ENABLED will kill DHCP. I'll open a ticket with what I found.


PIZZEDMEOFF wrote:
someone with a cable needs to do this and send a log of it to bs....or a ticket something is crashing this firmware i can get the GUI for a second as with the last build but its a little worse with this one. I cant find my TTL cable and ive went through some of my misc Stuff boxes and well its almost time to go to work now so someone has to pick up this torch.

1900ac v1 NO GO!

_________________
WRT1900ACSv2
PavelVD
DD-WRT User


Joined: 26 Jul 2019
Posts: 109

PostPosted: Sun Oct 13, 2019 21:25    Post subject: Reply with quote
I also installed it, but after some time the Internet disappeared and there was no Wi-Fi connection or LAN. Rebooting helped for a while, but then everything repeated. I took advantage of a short pause in access to control via the WEB and returned to r41218. After a while, the situation repeated itself. I had to do a factory reset from the WEB and load the settings. I do not use QUOS. While writing this post, the router crashed again, reset 30/30/30 and loaded the settings again, I'm waiting. Before the update, r41218 worked stably.
_________________
Linksys WRT1900ACSv2
Automatically adjustable temperature, always within the range of 59-68°С.
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Sun Oct 13, 2019 22:46    Post subject: Reply with quote
Having WiFi ENABLED on this build will kill DHCP...
I am running no problem on this build as well as the last as I don't have WiFi enabled. If you have WiFi enabled your DHCP will stop.

_________________
WRT1900ACSv2
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Mon Oct 14, 2019 2:29    Post subject: Reply with quote
just in from work, good job on some detective work, I kinda umm we will say Borrow? internet so turning wifi off isnt a option for me i use it as a bridge. lol

qos i dont use i have ummmm Borrowed? access to the network switches and modem etc. and the qos is done on it.

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum