Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
5. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
6. Reset button was broken in 40571; fixed in build 40750.
Issues, observations, and/or workarounds reported: 1.Trendnet 81*DRU models are missing factory-to-flash 2.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 3.WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) 4.K2.6 builds are broken since 38253(?) (GUI issues):6538 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Router: Netgear R7000P
Kernel: Linux 4.4.196 #66 SMP Thu Oct 10 08:24:35 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Reset: No
Uptime: 4:08
Status: all seems well
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Thu Oct 10, 2019 20:39 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41269_NEWD-2_K3.x_mega_RT-N66U.trx
Kernel: Linux 3.10.108-d8 #230 Thu Oct 10 15:05:43 +04 2019 mips
Mode: AP w/USB
Previous: r41218
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-41269_NEWD-2_K3.x_mega.bin
Kernel: Linux 3.10.108-d8 #230 Thu Oct 10 15:05:43 +04 2019 mips
Mode: Router, OpenVPN client
Previous: r41218
Reset?: N
Status: Working
Flashed from gui. Syslogs clean. Up 5 hours. Wait to see if timer/rekey issue reappears as in previous versions.
Last edited by turbowells on Thu Oct 10, 2019 21:37; edited 1 time in total
Posted: Thu Oct 10, 2019 20:45 Post subject: rt-n10u b1
wifi works sometimes bad
not working VOIP soft if router is on dd-wrt (UDP not working after NAT if TCP openvpn used)
httpd stucks works only after restart service
best working firmware was 40006
all others has no voip software,wifi,httpd
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41269 std (10/10/19)
Kernel: Linux 4.4.196 #61 SMP Thu Oct 10 08:01:14 +04 2019 armv7l
Previous: r41218
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far, but poor bufferbloat results with no change in config (will re-test that aspect later).
Edit (2019-10-11)... bufferbloat is back to normal today, must've been the network/site.
Uptime: 55min
Temperatures: CPU 69.1 °C / WL0 48.5 °C / WL1 54.3 °C
Last edited by flyzipper on Fri Oct 11, 2019 20:28; edited 1 time in total
Posted: Fri Oct 11, 2019 1:17 Post subject: WNDR4500v2
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r41269 giga (10/10/19)
Kernel: Linux 3.10.108-d8 #214 Thu Oct 10 14:52:41 +04 2019 mips
Mode: AP/Switch/DHCP Forwarder
Status: Working
Uptime: 5 min
Previous: 41218
Temps: WL0 43.6 °C / WL1 43.7 °C
I restarted before flashing the new version. Flashing was error free. I will let this unit run for awhile and re-flash once I have more uptime to see if the longer it runs it kills the crc check on flash.
Joined: 08 May 2018 Posts: 14222 Location: Texas, USA
Posted: Fri Oct 11, 2019 15:05 Post subject: Cisco Linksys E4200 v1
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-41269_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r41269 mega (10/10/19)
Kernel: Linux 3.10.108-d8 #230 Thu Oct 10 15:05:43 +04 2019 mips
Previous: DD-WRT v3.0-r41218 mega (10/01/19)
Reset: No
Mode: Gateway / AP - QoS (HFSC+FQ_CODEL_FAST)
Uptime: ~ 17:50
Status: OK
Issues / Errors: Nothing new to report.
Veritech wrote:
I restarted before flashing the new version. Flashing was error free. I will let this unit run for awhile and re-flash once I have more uptime to see if the longer it runs it kills the crc check on flash.
@Veritech, kill the CRC check? That is part of the upgrade program's process. Even stock vendor firmware does that.
Posted: Fri Oct 11, 2019 23:14 Post subject: Re: Cisco Linksys E4200 v1
kernel-panic69 wrote:
@Veritech, kill the CRC check? That is part of the upgrade program's process. Even stock vendor firmware does that.
All I know so far is when I flashed with days worth of uptime it bricked and when I rebooted the router just before flash it worked. Reading the boot log it looks to me that the crc failed. At 22 hours uptime I tested re-flashing the same version and it was successful. I'll test again in the beginning of next week when it has about 3 days uptime.
.:EDIT:.
From the previous log the file when uploaded was good: linux: CRC OK (0xAE692BE5)
and when it rebooted the crc was done for: Checking crc...Boot program checksum is invalid
so far the only difference in how it is flashed is the length of uptime.
Posted: Sat Oct 12, 2019 22:04 Post subject: R8000
Router: Netgear R8000
Kernel: N/A
Mode: N/A
Reset: Yes
Uptime:
Status: Does not work. I have tried it with a hard reset and upgrade and it does the same thing. No channel selection only Auto. The experimental drivers does not work for my router. Brainslayer please revert the drivers back.
