Beta Build 41218: 10-01-2019-r41218

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 115

PostPosted: Sun Oct 06, 2019 1:25    Post subject: WNDR4500v2 Reply with quote
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r41218 giga (10/01/19)
Kernel: Linux 3.10.108-d8 #34 Tue Oct 1 11:35:18 +04 2019 mips
Mode: AP/Switch/DHCP Forwarder
Status: Working no reset
Uptime: 17:48
Previous: 41212
Temps: WL0 43.7 °C / WL1 43.5 °C

Flashing from 41212 to 41218 did not brick the router this time around. Only thing I did different was reboot the router prior to flashing to watch the boot process through console output and watch the subsequent boot after the upgrade was initiated.
Sponsor
Mr.R™
DD-WRT Novice


Joined: 01 Jun 2010
Posts: 23

PostPosted: Sun Oct 06, 2019 10:33    Post subject: Reply with quote
jrscs wrote:
Router/Version: RT-AC87U A1
File: asus_rt-ac87u-firmware.trx
Firmware: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #19 SMP Tue Oct 1 07:41:40 +04 2019 armv7l
Mode/Status: Gateway/AP/OK
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, USB, NAS, NTP TimeSync, and Wake-on-WAN(internet)
Issues/Errors: Yes, but connections state no Internet Connection yet they do connect after a few moments longer. Everything is working...


Can you share your config please dude as i have the same router but wifi isn't working. Do you use ipv6 or anything else?


Thanks in advance
fatalhalt
DD-WRT Novice


Joined: 29 Oct 2015
Posts: 27

PostPosted: Mon Oct 07, 2019 22:42    Post subject: E3000? Reply with quote
Do the newest firmwares flash onto E3000 without bricking it? Can someone confirm?
marklg
DD-WRT Novice


Joined: 19 Oct 2017
Posts: 25

PostPosted: Tue Oct 08, 2019 1:51    Post subject: Re: E3000? Reply with quote
fatalhalt wrote:
Do the newest firmwares flash onto E3000 without bricking it? Can someone confirm?


I've got DD-WRT v3.0-r41174 mega (09/26/19) loaded and working.

Regards,

Mark
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2346
Location: Texas, USA

PostPosted: Tue Oct 08, 2019 4:07    Post subject: Re: E3000? Reply with quote
fatalhalt wrote:
Do the newest firmwares flash onto E3000 without bricking it? Can someone confirm?
E3000 and E4200 v1 aren't that far apart, hardware wise, and I am running this build since it was released.
Mr.R™
DD-WRT Novice


Joined: 01 Jun 2010
Posts: 23

PostPosted: Tue Oct 08, 2019 11:19    Post subject: Reply with quote
Mr.R™ wrote:
Router/Version: Asus RT-AC87U
File: DD-WRT v3.0-r41218 std (10/01/19)
Kernel: Linux 4.4.194 #19 SMP Tue Oct 1 07:41:40 +04 2019 armv7l
Mode: Gateway (PPOE/DHCPv6/QOS/Access Restrictions/Port Forwarding/JFS/USB/Entware)
Status: WiFi Broken

Wifi hasn't worked for me since DD-WRT v3.0-r40890 std (09/03/19), both 2.4 and 5Ghz allow devices to connect but they all state "Connected, No Internet", have tried both a flash with and without reset, makes no difference

Syslog is attached, the dnsmasq-dhcp[1549] entries are relating to the wifi devices trying to connect


After having a bit of time to do some fault finding i've discovered QoS is broken, fq codel causes the wifi issue, changing to cake or pie breaks the router, both wifi and ethernet were unable to connect so had to manually set ip to get back in and change back to fq codel before disabling QoS completely.
SinCalChewy
DD-WRT User


Joined: 09 Nov 2014
Posts: 296
Location: Bakersfield, CA

PostPosted: Wed Oct 09, 2019 11:00    Post subject: Re: E3000? Reply with quote
fatalhalt wrote:
Do the newest firmwares flash onto E3000 without bricking it? Can someone confirm?


I just updated both of my E3000 client bridge routers and they're up and working, so I guess so? Smile

_________________

Deployed Routers:
Netgear R7000 - 3x build 41517M (Gateway: Entware, Stubby DoT & DoH, CAKE)
Linksys E3000 - 2x build 41517M (Client Bridges)

Spares/Backups/Collection:
Too many to list. I have old routers, bricked routers, weird routers. You name it.
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 115

PostPosted: Thu Oct 10, 2019 0:32    Post subject: Re: WNDR4500v2 Reply with quote
Veritech wrote:
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r41218 giga (10/01/19)
Kernel: Linux 3.10.108-d8 #34 Tue Oct 1 11:35:18 +04 2019 mips
Mode: AP/Switch/DHCP Forwarder
Status: Working no reset
Uptime: 17:48
Previous: 41212
Temps: WL0 43.7 °C / WL1 43.5 °C

Flashing from 41212 to 41218 did not brick the router this time around. Only thing I did different was reboot the router prior to flashing to watch the boot process through console output and watch the subsequent boot after the upgrade was initiated.


.:EDIT:.

I decided to flash this router without rebooting prior to. I flashed 41218 over top 41218. This bricked the router. I have attached serial console output.



Output4500v2 41218-41218.txt
 Description:

Download
 Filename:  Output4500v2 41218-41218.txt
 Filesize:  2.3 KB
 Downloaded:  65 Time(s)

khanjar
DD-WRT Novice


Joined: 21 Oct 2019
Posts: 1

PostPosted: Mon Oct 21, 2019 15:57    Post subject: issue with this release Reply with quote
the speed checker is not working properly

or at least for me

when use the internet speed checker feature from the router page
i get reading between ( 27-50 mb/s )
if i browse to fast dot com or used the speedtest website

i get correct reading (250mb/s)



Capture.PNG
 Description:
fast speed test
 Filesize:  39.75 KB
 Viewed:  761 Time(s)

Capture.PNG



Capture1.PNG
 Description:
router speed test
 Filesize:  19.87 KB
 Viewed:  761 Time(s)

Capture1.PNG


kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2346
Location: Texas, USA

PostPosted: Mon Oct 21, 2019 17:11    Post subject: Re: issue with this release Reply with quote
khanjar wrote:
the speed checker is not working properly

or at least for me

when use the internet speed checker feature from the router page
i get reading between ( 27-50 mb/s )
if i browse to fast dot com or used the speedtest website

i get correct reading (250mb/s)


Re-read the first post in the thread. You have not stated anything about what device this pertains to or your configs, or anything of value other than the speedchecker feature of your particular device's build is not reporting correct information.
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum