Posted: Sat Oct 05, 2019 22:13 Post subject: Re: WNDR4500v2 RT-N66R
kernel-panic69 wrote:
If you don't want to crack open the router to connect, you can do a mod that uses a 3.5mm (1/8") stereo jack and plug for your interconnect cable for the adapter. Only thing I suggest is that if you have multiple devices, make sure the internal side of said mod connects correctly so you can use a standard config on the external cable. Single-pair STP audio snake cable works great.
That sounds like a great idea. I do some searching on that kind of mod. Do you have any pictures for placement or the like? Thanks
Posted: Sun Oct 06, 2019 0:57 Post subject: Re: WNDR4500v2 RT-N66R
Veritech wrote:
I'm using the TTL Serial adapter, I'm familiar with old school serial connections on the DB9 ports but I'm not sure if this is considered JTAG or just a slightly different serial connection. Standard serial port shows gibberish when connected. I'll connect it here soon and get a capture of the output.
JTAG uses a parallel port adapter (normally), while PC serial won't work as it's 5V; TTL serial (3.3v) is needed for recovery. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
x64 OPNsense 19.7.7|FT2019.3: EA6900v1.1@1GHz, F7D8302|DD 41596: WNDR4500v2, WNDR4000@533, R6300v1,
E2500, E1500@353, WRT54*@250: GLv1.1 nsg, GSv6 µ, RT-N66U@663|OEM: WGR614v10@400 -> WNR1000v3 mod