USB HID driver for Broadcom K3.X

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
DD-WRT Novice

Joined: 18 Jul 2015
Posts: 23
Location: Ohio

PostPosted: Mon Sep 23, 2019 20:40    Post subject: USB HID driver for Broadcom K3.X Reply with quote
Hi all,

I'm trying to get APCUPSd to work on a router to share its battery state with all other devices on the network. I already have Entware and the daemon installed and configured just right, however, I cannot find a driver anywhere that will allow communication. I have tried HID related packages from Entware (hidapi and libhid), downloads directly from old forum posts here, and even many kmod packages from different releases of OpenWRT, both for their kernel 3.3.8 and kernel 3.10.49, both from generic and mips74k divisions of the brcm47 branch.

router running DD-WRT v3.0-r40559 giga:
# uname -a
Linux WNR3500Lv2 3.10.108-d8 #25727 Tue Aug 6 11:02:24 +04 2019 mips DD-WRT

(BTW, why doesn't it say 'mipsel' if it really is...)

UPS is detected, but no driver:
# cat /proc/bus/usb/devices

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=051d ProdID=0002 Rev= 0.90
S:  Manufacturer=American Power Conversion
S:  Product=Back-UPS ES 850M2 FW:931.a7 .D USB
S:  SerialNumber=4B1733PXXXXX
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=100ms

every driver I tried results in either:
# insmod -f hid.o
insmod: cannot insert 'hid.o': invalid module format

(I understand kernels past 2.6 need ".ko" objects)

# insmod -f usbhid.ko
insmod: cannot insert 'usbhid.ko': unknown symbol in module

and I have tried 'hid.ko' objects too...

I'm at a loss, it seems it just isn't available yet
If I have to compile it myself, I will, but I have no idea where to start...
Should I start with the dd-wrt source?

thanks for reading

You don't have to be a professional, just keep reading...
DD-WRT Novice

Joined: 04 Mar 2016
Posts: 49

PostPosted: Tue Oct 01, 2019 19:19    Post subject: Reply with quote
I have a TP Link Archer C9 which I wanted to do this very same thing on. Unfortiuantely, to do that, I had to get a whole DD-WRT build environment going in a VM, and then slog through enough of the build to build those modules.

OTOH, once I got the hang of it, getting updated modules to go with new builds has been fairly easy (even if new revs often introduce new build issues, building the 3 necessary modules has been easy enough if you ignore the rest).

Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum