When dd-wrt members gets a new build, it is not uncommon for them to have one day where they give out "testers", essentially free samples that dd-wrt junkies will ultimately comment on the quality of the build. It ensures the scripter of not being ripped off by customers, and can also cause some dd-wrt junkies to become loyal to the forum, and its product. Junkies are often very excited for tester day, since it means a rare free high.
Lmfao! ,,l,,
Last edited by Justanotherbrokenrouter on Fri Sep 27, 2019 0:41; edited 2 times in total
Sprayed Router with anti failure spray
Flashed with no problems what so ever _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Webflashed to both partitions using Firefox 69.01 without issue. (Installed this to two 1900ACSv2 to
both partitions. One via the network using the GUI method and one with a direct connection to a PC via the GUI method (Spare 1900ACSv2). Both installed to both partitions on both WRT1900ACSv2 without issue).
Up and running now for about 12 hours no issue.
VPN working, SAMBA working, NAS working, DLNA working.
Firmware Version
DD-WRT v3.0-r41174 std (09/26/19)
Kernel Version
Linux 4.9.194 #1315 SMP Thu Sep 26 06:19:53 CEST 2019 armv7l _________________ WRT1900ACSv2
Last edited by DaveI on Fri Sep 27, 2019 16:22; edited 1 time in total
Sprayed Router with anti failure spray
Flashed with no problems what so ever
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2019
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
Could you post the commands you use to upgrade? Also, do you know what the commands are to stop and start OpenVPN? _________________ Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
