Re-flashing NAND

Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods
Author Message
nikkadimka
DD-WRT Novice


Joined: 21 Aug 2019
Posts: 7

PostPosted: Fri Sep 20, 2019 14:08    Post subject: Re-flashing NAND Reply with quote
I have made a NAND-dump with flashcatusb from working router and programmed new NAND chip. CFE now booting fine.

but when image start booting I see loot of ECC errors like below:
Code:

[...]
Initalizing switch low level hardware.
Software Resetting Switch ... Done.
Waiting MAC port Rx/Tx to be enabled by hardware ...Done
Disable Switch All MAC port Rx/Tx
devinfo: block read
devinfo: data is valid!
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Enable Switch MAC Port Rx/Tx, set PBVLAN to FAN out, set switch to NO-STP.
Loading 192.168.1.254:94908.dtb image at address 0x08000000..
Loading FW .....
Loading failed.: CFE error -21
boot from flash, mfg mode = -1
Loading FW .....
Loading failed.: CFE error -21
Booting from latest image (address 0x00100000, flash offset 0x00100000) ...
Uncorrectable ECC Error: intr 0x50, addr=0x0015fe00, blk=10,
Uncorrectable ECC Error: intr 0x50, addr=0x0015fe00, blk=10,
Uncorrectable ECC Error: intr 0x50, addr=0x002bfe00, blk=21,
Decompression LZMA Image OK!
Entry at 0x0000000000080000



[...]
bcm63xx_nand ff801800.nand: uncorrectable error at 0x680800
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 11:2048, read only 2048 bytes, retry
bcm63xx_nand ff801800.nand: uncorrectable error at 0x680800
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 11:2048, read only 2048 bytes, retry
bcm63xx_nand ff801800.nand: uncorrectable error at 0x680800
ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 11:2048, read only 2048 bytes, retry
[...]


any suggestions? Thank you!

PS: probably have to set ECC settings on flashcatusb, but can't find right one
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum