New Beta Release 41057: 09-18-2019-r41057

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14207
Location: Texas, USA

PostPosted: Wed Sep 18, 2019 16:12    Post subject: New Beta Release 41057: 09-18-2019-r41057 Reply with quote
Downloads: (if a link does not work, try another)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/09-18-2019-r41057/
ftp://ftp.dd-wrt.com/betas/2019/09-18-2019-r41057/
Alternate link: DD-WRT website
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or use ftp

Changelogs:
SVN* changelog since last build: 41027
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
4. CAKE scheduler added since r40547 (see 5796)

Issues, observations, and/or workarounds reported:
1. Trendnet 81*DRU models are missing factory-to-flash
2. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use: 6246
3. WDS does not work on Broadcom ARM devices (only MIPS<->MIPS)
4. K2.6 builds are broken since 38253(?) (GUI issues): 6538
5. VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b]Router/Version: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Mode: [/b]
[b]Status: [/b]

WARNING: This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build.
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14207
Location: Texas, USA

PostPosted: Wed Sep 18, 2019 16:43    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-41057_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r41057 mega (09/18/19)
Kernel: Linux 3.10.108-d8 #26848 Wed Sep 18 16:43:39 +04 2019 mips
Previous: DD-WRT v3.0-r41027 mega (09/13/19)
Reset: No
Mode: Gateway / AP
Uptime: ~20 min
Status: OK
Issues / Errors: With HFSC/FQ_CODEL_FAST, upload speed has been cut in half. The following error messages from serial log are present:

Code:
iptables v1.3.7: Couldn't find target `FILTER_OUT'
iptables v1.3.7: Couldn't find target `SVQOS_SVCS'






EDIT: Looks like I spoke too soon. Will probably have to test later tonight to verify, but this one the upload is closer to 'normal' (it peaked at around 8mb/s):



Really wish dslreports speed test was closer to ISP speed test. Looks like they have a lot of servers getting beat up.
tinkeruntilitworks
Guest





PostPosted: Wed Sep 18, 2019 18:51    Post subject: Reply with quote
Router: Netgear R7000P
Kernel: Linux 4.4.193-rc1 #1331 SMP Wed Sep 18 12:24:45 +04 2019 armv7l
Mode: Gateway / AP / Unbound
Status: using sfe / all seems well
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 301
Location: Maine, USA

PostPosted: Wed Sep 18, 2019 18:59    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-41057_NEWD-2_K3.x_mega_RT-N66U.trx
Kernel: Linux 3.10.108-d8 #26848 Wed Sep 18 16:43:39 +04 2019 mips
Mode: AP w/USB
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-41057_NEWD-2_K3.x_mega.bin
Kernel: Linux 3.10.108-d8 #26848 Wed Sep 18 16:43:39 +04 2019 mips
Mode: AP
Status: Working


Both flashed using GUI from r41027 without reset. Up 30 minutes. Syslog clean. Both exhibited rekey issue on prior versions. Saw nothing in svn which would indicate any change with rekey issue with this version.
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Wed Sep 18, 2019 20:14    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r41057 std (09/18/19)
Kernel: Linux 4.4.193-rc1 #1326 SMP Wed Sep 18 12:02:41 +04 2019 armv7l
Previous: r41027
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far, but syslog contains new errors (will attach examples later).

Uptime: 3hr 7min
Temperatures: CPU 69.1 °C / WL0 48.5 °C / WL1 54.3 °C
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

PostPosted: Thu Sep 19, 2019 8:19    Post subject: Reply with quote
Router/Version: Netgear R6250

Kernel: Linux 4.4.193-rc1 #1326 SMP Wed Sep 18 12:02:41 +04 2019 armv7l
Mode: PPPoE, WireGuard, QoS (HFSC+fq_codel_fast+18ndpi filters), AP 2&5 Ghz, DNSMasq with Google safe search - proxy dns redirecting,
Status: Working rick solid

Thank you BS!!!
watchsat
DD-WRT User


Joined: 31 Oct 2017
Posts: 55

PostPosted: Thu Sep 19, 2019 13:54    Post subject: Reply with quote
Router Model: Linksys EA6400
Firmware Version: DD-WRT v3.0-r41057 std (09/18/19)
Kernel Version: Linux 4.4.193-rc1 #1326 SMP Wed Sep 18 12:02:41 +04 2019 armv7l
Uptime: 21:21
Reset: No
Mode: Gateway
Status: OK
Issues: No issue, working so far



Router Model: Linksys EA6700
Firmware Version: DD-WRT v3.0-r41057 std (09/18/19)
Kernel Version: Linux 4.4.193-rc1 #1326 SMP Wed Sep 18 12:02:41 +04 2019 armv7l
Uptime: 21:13
Reset: No
Mode: 2 X Gateway, 1 X AP
Status: OK
Issues: No issue, working so far
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum