Joined: 24 Jul 2017
|Posted: Wed Sep 04, 2019 15:07 Post subject: 841N v11 - Cannot see each other lan client
|I own a TPLink WR841N v11 (CPU Qualcomm Atheros QCA9533 ver 2 rev 1.0 (0x0160)). Tried flashing versions 37305 and 40559, and wired clients are unable to see each other. Even from wireless client cannot ping any wired client.
As I read at this forum, tried this configuration commands
|swconfig dev switch0 set reset 1
swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 set apply
(Also replaced switch0 by eth0)
and didn't fix the issue. Is there anything I am missing? Is there any way to fix the wired switch problem?
Thanks in advance.