New Build : 09-03-2019-r40890

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page 1, 2  Next
Author Message
vanastasis
DD-WRT Novice


Joined: 31 Oct 2012
Posts: 4

PostPosted: Tue Sep 03, 2019 9:59    Post subject: New Build : 09-03-2019-r40890 Reply with quote
wrt1900acsv2 - Build r40890

Installed as per normal, not selected partition 1 or 2 just used firmware upgrade page.

so far all good, no error's in log

thank you Smile

_________________
Linksys WRT1900ACS v2 - DD-WRT v3.0-r40634 std (08/14/19)
Sponsor
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 297

PostPosted: Tue Sep 03, 2019 11:36    Post subject: Reply with quote
ftp://ftp.dd-wrt.com/betas/2019/09-03-2019-r40890/

https://dd-wrt.com/support/other-downloads/?path=betas%2F2019%2F09-03-2019-r40890%2F

Firmware Version
DD-WRT v3.0-r40890 std (09/03/19)
Kernel Version
Linux 4.9.190 #1273 SMP Tue Sep 3 03:02:37 CEST 2019 armv7l

The file size is back under 37MB. I webflashed from partition 1 to partition 2 without any problem. Then flashed from partition 2 to partition 1.

r40890 on BOTH Partitions.

Thankyou Sebastian Gottschall, a.k.a. "BrainSlayer"

_________________
WRT1900ACSv2
nickant
DD-WRT User


Joined: 09 Feb 2016
Posts: 151

PostPosted: Tue Sep 03, 2019 11:50    Post subject: Reply with quote
Updated WRT1900ACv1 from r40854 to r40890 via GUI, no reset.
Up and running!
Phew!

_________________
------------------------------------
Linksys EA8500 DD-WRT r41517 (Gateway + OpenVPN Client)
Linksys WRT1900ACv1 DD-WRT r41517 (AP)
Netgear/Telstra V7610 (spare AP)
Billion BiPAC 7800NXL (spare AP)
Netgear WNDR3700v4 DD-WRT r41369 (spare Gateway + OpenVPN Client)
Photos: https://www.flickr.com/photos/nickant44/albums
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 107

PostPosted: Tue Sep 03, 2019 12:14    Post subject: Reply with quote
Upgraded WRT1200AC v1 from r40854 to r40890 using Waterfox 56.2.13 (64 bit) running on Linux Mint 19.1 OS.

Flashed to partition 2 from partion 1. Successful update and reboot. Usual OpenVPN yellows in syslog. No reset,no issues

Kernel Version Linux 4.9.190 #1273 SMP Tue Sep 3 03:02:37 CEST 2019 armv7l

Sep 3 07:56:31 router daemon.notice openvpn[1658]: OpenVPN 2.4.7 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Sep 3 2019
Sep 3 07:56:31 router daemon.notice openvpn[1658]: library versions: OpenSSL 1.1.1c 28 May 2019, LZO 2.09

Ran r40854 since release with no issues at all. Hoping r40890 matches the performance.
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 162

PostPosted: Tue Sep 03, 2019 12:57    Post subject: Reply with quote
Flashed with FF68.0.2x64. No issues. Quick restart. OpenVPN did not reconnect. I had to disable VPN, Apply, enable, Apply. VPN connected quickly and all is well.

(missed updating my signature the first time.)

_________________
Netgear R9000 X10
DD-WRT v3.0-r41517 std (11/11/19)
AP, DNSMasq, Local DNS
CloudFlare DNS
ExpressVPN OpenVPN Client
QoS using HTB w/Cake
Static Leases & DHCP
2.4GHz 6 (HT20 20MHz)
5GHz 161 + 155 (VHT80 80MHz)
Xfinity 1Gbps/35Mbps
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 152
Location: FL

PostPosted: Tue Sep 03, 2019 13:21    Post subject: Reply with quote
updated both partitions worked fine
nothing crazy so far.

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2019
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &


WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 6, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.
Misc Info: Wireless Mode: "Client" WPA2 Personal: "CCMP-128 (AES)", Virtual Wireless AP "2.4 + 5ghz", Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv.
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 195
Location: South Carolina

PostPosted: Tue Sep 03, 2019 15:06    Post subject: DD-WRT v3.0-r40890 std (09/03/19) Reply with quote
WRT3200ACM V1 r40890 Firefox 68.0.2 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
SurprisedItWorks
DD-WRT User


Joined: 04 Aug 2018
Posts: 454
Location: Appalachian mountains, USA

PostPosted: Tue Sep 03, 2019 15:14    Post subject: Reply with quote
MLandi wrote:
Flashed with FF68.0.2x64. No issues. Quick restart. OpenVPN did not reconnect. I had to disable VPN, Apply, enable, Apply. VPN connected quickly and all is well.
A couple of experiments you might try on your next boot. I'd be curious to hear the results. After the boot (or at any time, actually), just either
  1. hit Apply on the openvpn client setup page. For me that's always restarted openvpn. I've never needed to disable and re-enable.
  2. Or do killall -HUP openvpn in the CLI. For me that restarts the vpn connection very cleanly, per the vpn log.

_________________
Six of the Linksys WRT1900ACSv2 on r38159, r39144, r40009, and r40784. On various:
VLANs, client-mode travel router, two DNSCrypt servers (incl Quad9), multiple VAPs, USB/NAS, QoS, OpenVPN client/PBR (old=NordVPN, new=AirVPN).
SurprisedItWorks
DD-WRT User


Joined: 04 Aug 2018
Posts: 454
Location: Appalachian mountains, USA

PostPosted: Tue Sep 03, 2019 15:22    Post subject: Reply with quote
Let's see if we can sort out what was removed, if anything, to make this release smaller (before I actually flash it). My biggest concern is DNSCrypt, since the enable button for it disappeared some time ago. Could someone try ls -l /etc/dnscrypt/dnscrypt-resolvers.csv /usr/sbin/dnscrypt-proxy in the CLI? Here's what it produced for me (in 40784):
Quote:
# ls -l /etc/dnscrypt/dnscrypt-resolvers.csv /usr/sbin/dnscrypt-proxy
-rwxr-xr-x 1 root root 22309 Aug 24 22:31 /etc/dnscrypt/dnscrypt-resolvers.csv
-rwxr-xr-x 1 root root 266883 Aug 24 22:34 /usr/sbin/dnscrypt-proxy

If those two files are there in the new release. then presumably we still have the option of using the old DNSCrypt (discussed in the post linked in my sig) without the entware requirement of the new DNSCrypt as discussed in https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320764.

_________________
Six of the Linksys WRT1900ACSv2 on r38159, r39144, r40009, and r40784. On various:
VLANs, client-mode travel router, two DNSCrypt servers (incl Quad9), multiple VAPs, USB/NAS, QoS, OpenVPN client/PBR (old=NordVPN, new=AirVPN).
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 152
Location: FL

PostPosted: Tue Sep 03, 2019 16:19    Post subject: Reply with quote
SurprisedItWorks wrote:
Let's see if we can sort out what was removed, if anything, to make this release smaller (before I actually flash it). My biggest concern is DNSCrypt, since the enable button for it disappeared some time ago. Could someone try ls -l /etc/dnscrypt/dnscrypt-resolvers.csv /usr/sbin/dnscrypt-proxy in the CLI? Here's what it produced for me (in 40784):
Quote:
# ls -l /etc/dnscrypt/dnscrypt-resolvers.csv /usr/sbin/dnscrypt-proxy
-rwxr-xr-x 1 root root 22309 Aug 24 22:31 /etc/dnscrypt/dnscrypt-resolvers.csv
-rwxr-xr-x 1 root root 266883 Aug 24 22:34 /usr/sbin/dnscrypt-proxy

If those two files are there in the new release. then presumably we still have the option of using the old DNSCrypt (discussed in the post linked in my sig) without the entware requirement of the new DNSCrypt as discussed in https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320764.


-rwxr-xr-x 1 root root 22309 Sep 2 21:24 /etc/dnscrypt/dnscrypt-resolvers.csv
-rwxr-xr-x 1 root root 266883 Sep 2 21:30 /usr/sbin/dnscrypt-proxy

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2019
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &


WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel 6, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 80mhz channel width, channel 100+6, WPA2-CCMP-128.
Misc Info: Wireless Mode: "Client" WPA2 Personal: "CCMP-128 (AES)", Virtual Wireless AP "2.4 + 5ghz", Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv.
ellick
DD-WRT User


Joined: 28 Mar 2016
Posts: 194

PostPosted: Tue Sep 03, 2019 17:04    Post subject: Reply with quote
Webflashed from r4009 on partition 2 to partition 1.

Everything seems good but the openvpn startup is still bugged. I have to press save then press apply twice before it will start. This occurs in the last 4-5 builds I've tried.

bug report here: https://svn.dd-wrt.com/ticket/6785#no1

This is just a minor nuisance. I start and stop my vpn all the time to get around a geo-restriction on mlb.tv for baseball games so I notice it.

I'm happy BS has gotten the firmware size back under control. now "let them eat cake!"

linksys wrt1900acs v.1
PavelVD
DD-WRT Novice


Joined: 26 Jul 2019
Posts: 29

PostPosted: Tue Sep 03, 2019 17:44    Post subject: Reply with quote
SurprisedItWorks wrote:
... My biggest concern is DNSCrypt, since the enable button for it disappeared some time ago.

I tried DNSCrypt works without a button.
Linksys WRT1900ACSv2
DD-WRT v3.0-r40890 std (09/03/19)

In the log for the latest firmware there are red entries:
Code:
Jan 1 03:00:25 LinkSYS daemon.warn sm-notify[1468]: Failed to open sm: No such file or directory
Jan 1 03:00:25 LinkSYS daemon.err sm-notify[1468]: Failed to open directory sm.bak: No such file or directory
Jan 1 03:00:25 LinkSYS daemon.err rpc.statd[1467]: Failed to open directory sm: No such file or directory

I don't know is that bad?
SurprisedItWorks
DD-WRT User


Joined: 04 Aug 2018
Posts: 454
Location: Appalachian mountains, USA

PostPosted: Tue Sep 03, 2019 17:51    Post subject: Reply with quote
PIZZEDMEOFF and PavelVD, thanks much re DNSCrypt. Very encouraging! So far I'm not seeing any reason not to take this as the new go-to build.
_________________
Six of the Linksys WRT1900ACSv2 on r38159, r39144, r40009, and r40784. On various:
VLANs, client-mode travel router, two DNSCrypt servers (incl Quad9), multiple VAPs, USB/NAS, QoS, OpenVPN client/PBR (old=NordVPN, new=AirVPN).
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 297

PostPosted: Tue Sep 03, 2019 17:54    Post subject: Reply with quote
That's used for NFS...
https://linux.die.net/man/8/sm-notify

PavelVD wrote:
SurprisedItWorks wrote:
... My biggest concern is DNSCrypt, since the enable button for it disappeared some time ago.

I tried DNSCrypt works without a button.
Linksys WRT1900ACSv2
DD-WRT v3.0-r40890 std (09/03/19)

In the log for the latest firmware there are red entries:
Code:
Jan 1 03:00:25 LinkSYS daemon.warn sm-notify[1468]: Failed to open sm: No such file or directory
Jan 1 03:00:25 LinkSYS daemon.err sm-notify[1468]: Failed to open directory sm.bak: No such file or directory
Jan 1 03:00:25 LinkSYS daemon.err rpc.statd[1467]: Failed to open directory sm: No such file or directory

I don't know is that bad?

_________________
WRT1900ACSv2
PavelVD
DD-WRT Novice


Joined: 26 Jul 2019
Posts: 29

PostPosted: Tue Sep 03, 2019 18:08    Post subject: Reply with quote
DaveI wrote:
That's used for NFS...
https://linux.die.net/man/8/sm-notify
Need to create a ticket?
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum