Linksys Cisco E900 = Broadcom 5357, No Build released yet.

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... , 14, 15, 16  Next
Author Message
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5171
Location: Akershus, Norway

PostPosted: Fri Oct 27, 2017 22:52    Post subject: Reply with quote
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311923
Sponsor
Inalak
DD-WRT Novice


Joined: 27 Oct 2017
Posts: 4

PostPosted: Fri Oct 27, 2017 23:09    Post subject: Reply with quote
Per Yngve Berg wrote:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311923


Thanks...but i'm unsure of what to do with that. I'm kinda new to this and I looked through the links in that thread and did a bit of reading but can't find anything pertaining to my E900 linksys.

Sorry if I'm slow on this. I'll keep reading and see if I can find anything that might work for me I guess.
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5171
Location: Akershus, Norway

PostPosted: Sat Oct 28, 2017 7:39    Post subject: Reply with quote
Start with the 33525 build. It's stsble, but foes not have the krack fixed.

33607 have wifi isues. Wait s few dayd until a stsble build comes out.
Inalak
DD-WRT Novice


Joined: 27 Oct 2017
Posts: 4

PostPosted: Wed Nov 08, 2017 22:16    Post subject: Reply with quote
I must not know how to navigate this place yet. I just flashed the firmware listed on the e900 DD-WRT wiki page because that's the only one I could find. I used the mega version from the following link. I found the link on the router-database page.

https://www.dd-wrt.com/routerdb/de/download/Linksys/E900/v1.0/dd-wrt.v24-21061_NEWD-2_K2.6_mega-nv64k.bin/3931

I found the page for the 33525 build but nothing specifically for my linksys e900. I don't wanna risk just putting any random 33525 build and accidentally bricking my router.

Any suggestions anyone? Sorry again for being so new to this stuff.
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7213
Location: Columbus, Ohio

PostPosted: Wed Nov 08, 2017 23:18    Post subject: Reply with quote
Inalak wrote:
I must not know how to navigate this place yet. I just flashed the firmware listed on the e900 DD-WRT wiki page because that's the only one I could find. I used the mega version from the following link. I found the link on the router-database page.

https://www.dd-wrt.com/routerdb/de/download/Linksys/E900/v1.0/dd-wrt.v24-21061_NEWD-2_K2.6_mega-nv64k.bin/3931

I found the page for the 33525 build but nothing specifically for my linksys e900. I don't wanna risk just putting any random 33525 build and accidentally bricking my router.

Any suggestions anyone? Sorry again for being so new to this stuff.


ftp://ftp.dd-wrt.com/betas/2017/10-17-2017-r33525/broadcom_K26/dd-wrt.v24-33525_NEWD-2_K2.6_mega-nv64k.bin

Found here ftp://ftp.dd-wrt.com/betas/2017/10-17-2017-r33525/broadcom_K26/

_________________
I am far from a guru, I'm barely a novice.
Inalak
DD-WRT Novice


Joined: 27 Oct 2017
Posts: 4

PostPosted: Thu Nov 09, 2017 18:42    Post subject: Reply with quote
Malachi wrote:
Inalak wrote:
I must not know how to navigate this place yet. I just flashed the firmware listed on the e900 DD-WRT wiki page because that's the only one I could find. I used the mega version from the following link. I found the link on the router-database page.

https://www.dd-wrt.com/routerdb/de/download/Linksys/E900/v1.0/dd-wrt.v24-21061_NEWD-2_K2.6_mega-nv64k.bin/3931

I found the page for the 33525 build but nothing specifically for my linksys e900. I don't wanna risk just putting any random 33525 build and accidentally bricking my router.

Any suggestions anyone? Sorry again for being so new to this stuff.


ftp://ftp.dd-wrt.com/betas/2017/10-17-2017-r33525/broadcom_K26/dd-wrt.v24-33525_NEWD-2_K2.6_mega-nv64k.bin

Found here ftp://ftp.dd-wrt.com/betas/2017/10-17-2017-r33525/broadcom_K26/


Holy hell...I'M SO SORRY. I'm such an idiot. In all my clicking and searching I didn't realize what thread I was in. I didn't realize it CLEARLY states "Linksys Cisco E900 = Broadcom 5357,  No Build released yet".

Thanks for the links Malachi. Thanks a ton.

Thanks for putting up with me guys. Again, sorry and thanks so much.
gabo_ec
DD-WRT Novice


Joined: 03 Aug 2018
Posts: 1

PostPosted: Fri Aug 03, 2018 22:05    Post subject: problem with access to linksys e900 Reply with quote
Hello, excuse my bad English. I have a linksys e900 that installs its firmware from dd-wrt.v24-36410_NEWD-2_K3.x_mega-e900.bin to dd-wrt.v24-36410_NEWD-2_K2.6_big-nv60k.bin. The first functioned well for about 3 hours and decided to increase the performance with the second, but after updating the GUI did not reappear and I did not give IP to the linksys so I can not recover the router. Could you help me? first of all, Thanks
jipjip
DD-WRT Novice


Joined: 13 Apr 2014
Posts: 5

PostPosted: Sat Aug 11, 2018 15:22    Post subject: Reply with quote
What would be a recommended recent stable build for the E900? Still 33525? I've tried out the two most recent builds dd-wrt.v24-36410_NEWD-2_K3.x_mega-e900 and dd-wrt.v24-36527_NEWD-2_K3.x_mega-e900. But I'm experiencing some WiFi issues like I mentioned here: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316067&postdays=0&postorder=asc&start=84.

Communication via WiFi stops working occasionally, but the connection doesn't drop completely. The WiFi client stays connected, has an ip address in correct range but can't ping anything. Not even the router ip address.

I'll be using the E900 as router, WiFi access point, for wake on lan, dnsmasq and Connection Watchdog.
Camshafts
DD-WRT Novice


Joined: 07 Aug 2018
Posts: 3

PostPosted: Mon Aug 13, 2018 16:53    Post subject: Reply with quote
Hello everyone, I'm new to the group, I tried updating the Linksys E900's firmware via the cable following all the advice. in the middle of the update the process stopped without explanation and the router went into a loop. I tried the hard reset 30/30/30, it did not work, TFTP2 complete successfully but the ping continues TTL = 100 the power light flashes slowly, I'm already going crazy !!! Can someone help me?
GeeTek
DD-WRT Guru


Joined: 06 Jun 2006
Posts: 3770
Location: I'm the one on the plate.

PostPosted: Tue Aug 14, 2018 22:09    Post subject: Reply with quote
Camshafts wrote:
Hello everyone, I'm new to the group,
Shocked
Are you using the firmware named dd-wrt.v24-36527_NEWD-2_K2.6_mini-e900.bin ?

_________________
http://69.175.13.131:8015 Streaming Week-End Disco. Station Ripper V 1.1 will do.
Camshafts
DD-WRT Novice


Joined: 07 Aug 2018
Posts: 3

PostPosted: Thu Aug 16, 2018 19:02    Post subject: Reply with quote
GeeTek wrote:
Camshafts wrote:
Hello everyone, I'm new to the group,
Shocked
Are you using the firmware named dd-wrt.v24-36527_NEWD-2_K2.6_mini-e900.bin ?


I already tried the firmware dd-wrt.v24-33525_NEWD-2_K2.6_mini-e900.bin; dd-wrt.v24-36410_NEWD-2_K2.6_mini-e900.bin; FW_E900_1.0.08.002_US_20171208.bin; FW_E900_v1.0.02.010_US_20120621.bin, all successfully installed, I have waited 2, 3, 5, 10 minutes after the update through TFTP, but TTL = 100 remains. After the power cicle TTL = 63 I have never seen this in any forum !!! To get the TTL = 100 I have to unplug power adapter from router, plug back in ... hit upgrade button immediately.

P.s. I use Static IP: 192.168.1.10
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1

Never used another IP on the router


Thanks a lot!!
Camshafts
DD-WRT Novice


Joined: 07 Aug 2018
Posts: 3

PostPosted: Wed Aug 22, 2018 1:22    Post subject: Reply with quote
GeeTek wrote:
Camshafts wrote:
Hello everyone, I'm new to the group,
Shocked
Are you using the firmware named dd-wrt.v24-36527_NEWD-2_K2.6_mini-e900.bin ?



Now I've used this firmware named dd-wrt.v24-36527_NEWD-2_K2.6_mini-e900.bin, the same result above.
Huxflux21
DD-WRT Novice


Joined: 12 Jul 2019
Posts: 1

PostPosted: Fri Jul 12, 2019 3:39    Post subject: Reply with quote
Hmmm does it work for e900
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 2025
Location: Texas, USA

PostPosted: Fri Jul 12, 2019 5:10    Post subject: Reply with quote
Huxflux21 wrote:
Hmmm does it work for e900


You didn't have to ask 3 times. Best advice is to check the build threads and the wiki.

https://wiki.dd-wrt.com/wiki/index.php/Linksys_E900

But, is that what lead you to this thread, reading the wiki? Rolling Eyes Cool
Mastahh
DD-WRT Novice


Joined: 19 Oct 2013
Posts: 11

PostPosted: Thu Aug 29, 2019 10:25    Post subject: Reply with quote
Hi, anybody have a problem that after some time wi-fi client cannot resolve any address using dns?

I have a lot of following type errors:

Name resolution for the name somehost.com timed out after none of the configured DNS servers responded.

DD-WRT v3.0-r40559 mega (08/06/19)
Goto page Previous  1, 2, 3 ... , 14, 15, 16  Next Display posts from previous:    Page 15 of 16
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum