Notes: 1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer 2. 'KRACK' vulnerability fixes were completed in r33678 for Broadcom, including k26 (33655) & k24 (33656); use 33772 or later.
3. Bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead as WDS doesn't work with Broadcom ARM either (see Issues below).
4. PBR/UDP with SFE working again since r40513 (see 6729)
4. CAKE scheduler added since r40547 (see 5796)
Issues, observations, and/or workarounds reported: 1.Trendnet 81*DRU models are missing factory-to-flash 2.DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use:6246 3.WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) 4.K2.6 builds are broken since 38253(?) (GUI issues):6538 5.VAPs not working at boot; workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
This appears fixed (only for unbridged VAPs?) with r40564:40566...
Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
Template to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
WARNING:This thread is to report on flashing this experimental test build, providing important info for both developers and users. Always state your hardware model, version, mode (e.g. Repeater) and SPECIFIC build (e.g. 33555_NEWD-2_K3.x_mega-nv64k.bin). Please avoid discussions and create a new thread to discuss specific problems or questions, as this thread is for reporting, not support. Posts may be deleted or moved to keep this thread manageable and useful. If you don't understand the risks or what to flash and how, with a means of recovery if it bricks, do NOT flash this experimental test build. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r40750 (08/23/19)
Kernel: Linux 4.4.189 #861 SMP PREEMPT Fri Aug 23 06:23:34 +04 2019 armv7l
Previous: r40723
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Initial upgrade worked and my usual tests all passed. Changed fq_codel to fq_codel_fast, saved, applied... lost connection (no wifi). Glad the reset button works... back to original config and working well so far. One (cosmetic?) item appears to be the load average bar graph on the Status tab... it's stuck at 50% even though top shows the device is mostly idle.
Uptime: 34min
Temperatures: CPU 69.1 °C / WL0 48.5 °C / WL1 54.1 °C
did you recently go through the wirless settings in the gui? i think it might be a bug
*it hasn't happened to ne in a while but it has happened to me. i just reboot
Thanks, I was in the wireless settings after the reset I mentioned in my earlier post (reset > config & save on multiple tabs > apply = 50% display). I just clicked apply again (without rebooting), thinking I hadn't after some part of the config and the 50% graph visual is fixed.
Router/Version: Asus TM-AC1900 (RT-AC68U)
Firmware: DD-WRT v3.0-r40750 (08/23/19)
Kernel: Linux 4.4.189 #861 SMP PREEMPT Fri Aug 23 06:23:34 +04 2019 armv7l
Previous: r40723
Mode/Status: Gateway, QoS (FQ_Codel), Unbridged VAP
Reset: no
Issues/Errors: None so far
Uptime: 42min
Temperatures: CPU 74.7 °C / WL0 50.3 °C / WL1 51.8 °C _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Router Model: Asus RT-AC68U
Firmware Version: DD-WRT v3.0-r40750 std (08/23/19)
Kernel Version: Linux 4.4.189 #861 SMP PREEMPT Fri Aug 23 06:23:34 +04 2019 armv7l
Reset: No
As mentioned above fq_codel_fast still not working and causes a soft-brick if selected. Otherwise working normal.
did you recently go through the wirless settings in the gui? i think it might be a bug
*it hasn't happened to ne in a while but it has happened to me. i just reboot
Thanks, I was in the wireless settings after the reset I mentioned in my earlier post (reset > config & save on multiple tabs > apply = 50% display). I just clicked apply again (without rebooting), thinking I hadn't after some part of the config and the 50% graph visual is fixed.
Router/Version: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r40750 std (08/23/19)
Kernel: Linux 4.4.189 #861 SMP PREEMPT Fri Aug 23 06:23:34 +04 2019 armv7l
Mode: Router / AP (5G) / Client Bridge (2G) (no WAN)
Status: operational
Reset: no
Issues/Errors: no
Before: DD-WRT v3.0-r40672
Router/Version: Linksys EA6900
Firmware: DD-WRT v3.0-r40750 std (08/23/19)
Kernel: Linux 4.4.189 #861 SMP PREEMPT Fri Aug 23 06:23:34 +04 2019 armv7l
Mode: Gateway / AP (normal wired WAN-port)
Status: operational
Reset: no
Issues/Errors: no
Before: DD-WRT v3.0-r40672
Router/Version: Netgear WNDR4500
Firmware: DD-WRT v3.0-r40750 giga (08/23/19)
Kernel: Linux 3.10.108-d8 #26117 Fri Aug 23 11:06:31 +04 2019 mips
Mode: Gateway / Client (2G, WAN on WLAN)
Status: nonoperational
Reset: no
Issues/Errors: LAN-switch no longer connected to anything- no DHCP, no webinterface, no ssh, no ping.
Before: DD-WRT v3.0-r40672
After reset and reconfig now 30h stable
Last edited by lfb on Sun Aug 25, 2019 22:25; edited 1 time in total
did you recently go through the wirless settings in the gui? i think it might be a bug
*it hasn't happened to ne in a while but it has happened to me. i just reboot
Thanks, I was in the wireless settings after the reset I mentioned in my earlier post (reset > config & save on multiple tabs > apply = 50% display). I just clicked apply again (without rebooting), thinking I hadn't after some part of the config and the 50% graph visual is fixed.
Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Sun Aug 25, 2019 4:06 Post subject: Cisco Linksys E4200 v1
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-40750_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r40750 mega (08/23/19)
Kernel: Linux 3.10.108-d8 #26133 Fri Aug 23 11:18:30 +04 2019 mips
Previous: DD-WRT v3.0-r40701 mega (08/20/19)
Reset: No
Mode: Gateway / AP
Uptime: ~1 day, 12:30
Status: OK
Issues/Errors: All good so far.
did you recently go through the wirless settings in the gui? i think it might be a bug
*it hasn't happened to ne in a while but it has happened to me. i just reboot
Thanks, I was in the wireless settings after the reset I mentioned in my earlier post (reset > config & save on multiple tabs > apply = 50% display). I just clicked apply again (without rebooting), thinking I hadn't after some part of the config and the 50% graph visual is fixed.
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r40750 std (08/23/19)
Kernel: Linux 4.4.189 #865 PREEMPT Fri Aug 23 06:42:20 +04 2019 armv7l
Mode: Gateway
Previous: r40527
Reset: No
Status: dhcp, static leases, unbound, smb and wireless works ok so far.
