Posted: Wed Aug 14, 2019 17:29 Post subject: Do Virtual Access Points add "noise" in bands?
Just a simple question. Let's say I have created 10 virtual access points from my 2.4 GHz interface. Would those 10 extra "virtual" SSIDs add noise, make connection worse, etc. to my client devices, the same way as it would happen if my neighbor has 10 extra "real" access points running? Or since my creation are "virtual", it doesn't really matter that I have 10 extra SSIDs in the same channel, as they all are from one single interface and are being "simulated" by it?
Joined: 03 Jan 2010 Posts: 7141 Location: YWG, Canada
Posted: Thu Aug 15, 2019 0:20 Post subject:
noise as in interference, no. increased overhead on the channel from more beacons, yes. which can be reduced by not using 802.11b rates, (as in 6mbps being lowest basic rate and not 1mbps) and increasing beacon interval.
if 10 vaps are running or just 10 aps period, on the same channel all nearby, and all are idle except one, the beacons used to broadcast those ssids will take up more airtime than if there was just one. if multiple of those vaps will be active at any given time, performance will cut in half (or more) if they are all from one radio, as the radio has to quickly alternate taking turns between each. _________________ LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings Guide || Qualcomm Atheros Repeating
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 23 Jul 2017 Posts: 724 Location: Brisbane, Australia
Posted: Thu Aug 15, 2019 1:00 Post subject:
Even when all access points are idle, each SSID will be transmitting 10 Beacon frames per second, which is not insignificant as Beacon frames are sent at the lowest possible speed. With wireless b enabled you would definitely notice a drop in your wifi speed.
It is probably academic, as I do not think you can add more than a couple of virtual ccess points with DD-WRT.
Joined: 04 Aug 2018 Posts: 496 Location: Appalachian mountains, USA
Posted: Thu Aug 15, 2019 15:05 Post subject:
...I do not think you can add more than a couple of virtual ccess points with DD-WRT.
For the last year I've used five SSIDs for five subnets. Three of those are VAPs. _________________ Six Linksys WRT1900ACSv2 (38159, r39144, 40009, 40784):
VLANs, multiple VAPs, NAS, QoS, client-mode travel router, OpenVPN client/PBR (old=NordVPN, new=AirVPN), two DNSCrypt servers (incl Quad9) routed through vpn.