Newifi3 D2

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Author Message
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Tue Jun 25, 2019 4:57    Post subject: Newifi3 D2 Reply with quote
Dear All

I would like to know which type of firmware can apply this router "Newifi3 D2".

I had tried to use those firmwares but they do not work. I also want to donate a router to dd-wrt before I sent a message to them but they do not reply!

I feel sad!

CPU1: MediaTek MT7621AT (880 MHz, 2 cores)
FLA1: 32 MiB (Winbond 25Q256JVFQ)
RAM1: 512 MiB (Nanya NT5CC256M16EP-EK)
Expansion IFs: USB 3.0
USB ports: 1
Serial: yes, 4-pin header

WI1 chip1: MediaTek MT7603EN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: MediaTek MT7612EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL


Regards

M

dlink-dir860lb1-webflash.bin

buffalo_whr_1166d-webflash.bin


References:
https://wikidevi.com/wiki/Lenovo_Newifi_3

http://www.newifi.com/product_newifi3_summary.shtml Crying or Very sad
Sponsor
sensegsm
DD-WRT Novice


Joined: 22 Jun 2019
Posts: 3

PostPosted: Fri Jul 26, 2019 9:36    Post subject: Reply with quote
Is not too much but this is working for me. Please flash with breed and wait some time to initialize.
sensegsm
DD-WRT Novice


Joined: 22 Jun 2019
Posts: 3

PostPosted: Sat Aug 24, 2019 9:04    Post subject: Reply with quote
This is very stable for me, i use about two weeks:
https://drive.google.com/file/d/1JrS7CvTXEVMf5V9kQTMZBiphcgjz432s/view?usp=sharing
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Wed Sep 11, 2019 17:28    Post subject: Newifi3 D2 Reply with quote
Dear sensegsm

You mean this file "dd-wrt-nxt.bin" is working for Newifi3 D2!

Regards

M
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Thu Sep 12, 2019 18:11    Post subject: Reply with quote
DD-WRT NXT works for NewWifi3 D2
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Sat Sep 14, 2019 12:13    Post subject: Reply with quote
sensegsm wrote:
This is very stable for me, i use about two weeks:
https://drive.google.com/file/d/1JrS7CvTXEVMf5V9kQTMZBiphcgjz432s/view?usp=sharing


Many Thank for your supporting! Very Happy

The firmware works for Newifi D2 but the firmware does not support WPA2 Enterprise! Wifi Mode also the same problem!
NorthantsPete
DD-WRT Novice


Joined: 05 Feb 2018
Posts: 21

PostPosted: Wed Jan 15, 2020 8:17    Post subject: Reply with quote
I have a newifi Y1 - does this work?
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Wed Jan 15, 2020 8:26    Post subject: Reply with quote
NorthantsPete wrote:
I have a newifi Y1 - does this work?


I use Newifi 3 with NXT DD-WRT. In the future, I will try to flash DIR-882 DD-WRT Firmware and the next step is to flash DD-WRT Bootloader. However, I need to rescue my DIR-882 first.
motocrossmann
DD-WRT Novice


Joined: 05 Jan 2009
Posts: 39

PostPosted: Fri Mar 20, 2020 0:32    Post subject: Reply with quote
M wrote:
NorthantsPete wrote:
I have a newifi Y1 - does this work?


I use Newifi 3 with NXT DD-WRT. In the future, I will try to flash DIR-882 DD-WRT Firmware and the next step is to flash DD-WRT Bootloader. However, I need to rescue my DIR-882 first.


Which firmware did you flash? I can't find any documentation on how to get NXT onto the Newifi D2. Also, does the 5Ghz work well?
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Sun Mar 22, 2020 6:45    Post subject: Reply with quote
Firstly, we need to say thank to sensegsm!

It works. Breed Bootloader can support openwrt, dd-wrt nxt and mutation openwrt. In dd-wrt, the model of firmware had checked. It works but memory shows 64MB only.

I believe that it can support dd-wrt but it need to flash the dd-wrt firmware. After that, the router need to flash a dd-wrt bootloader such as DIR-882. The extraction needs to use telnet. If not, the dd-wrt may not support.

My DIR-882 had bricked. I also use Bios Burner flashing breed and flash openwrt mutation firmware but dd-wrt cannot use.




motocrossmann wrote:
M wrote:
NorthantsPete wrote:
I have a newifi Y1 - does this work?


I use Newifi 3 with NXT DD-WRT. In the future, I will try to flash DIR-882 DD-WRT Firmware and the next step is to flash DD-WRT Bootloader. However, I need to rescue my DIR-882 first.


Which firmware did you flash? I can't find any documentation on how to get NXT onto the Newifi D2. Also, does the 5Ghz work well?
sionghua
DD-WRT Novice


Joined: 09 Feb 2009
Posts: 35

PostPosted: Mon Apr 27, 2020 4:26    Post subject: Reply with quote
How to flash breed? I bought this router with breed but accidentally overridden it.
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Mon Apr 27, 2020 5:22    Post subject: Reply with quote
sionghua wrote:
How to flash breed? I bought this router with breed but accidentally overridden it.


https://breed.hackpascal.net/


The bootloader can flash to blos but I had tried to flash DD-WRT rom to DIR-882 and Newifi D2. They have not work. The reason is DD-WRT firmware UBoot does not match to Breed.

You can flash Openwrt Firmware or the other third-party type of openwrt firmware but you will not enjoy dd-wrt firmware function. Actually, I hate to use open-wrt. They makes the interface very complex.

DIR-882 Official Bootloader cannot work in Newifi D2. Don't try!
DIR-882 Official Bootloader also cannot recover the dd-wrt firmware and D-link firmware. It has showed time out.


BIOS Burner is just for bootloader only!


Last edited by M on Mon Apr 27, 2020 5:33; edited 1 time in total
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 183

PostPosted: Mon Apr 27, 2020 5:28    Post subject: Reply with quote
M wrote:
sionghua wrote:
How to flash breed? I bought this router with breed but accidentally overridden it.


https://breed.hackpascal.net/


The bootloader can flash to blos but I had tried to flash DD-WRT rom to DIR-882 and Newifi D2. They have not work.

You can flash Openwrt Firmware.

DIR-882 Official Bootloader cannot work in Newifi D2. Don't try!
DIR-882 Official Bootloader also cannot recover the dd-wrt firmware and D-link firmware. It has showed time out.


BIOS Burner is just for bootloader only!
sionghua
DD-WRT Novice


Joined: 09 Feb 2009
Posts: 35

PostPosted: Mon Apr 27, 2020 9:24    Post subject: Reply with quote
Thanks, got the .bin file but not quite sure what to do with it.
eeff11
DD-WRT User


Joined: 23 Jan 2013
Posts: 116

PostPosted: Tue Jul 28, 2020 5:28    Post subject: Reply with quote
Generally,

1.replace the stock bootloader with another one named as 'breed'.
2.enter breed,upload the DD-wrt nxt firmware.

Any update about RAM,still 64MB only?

What about myPage in DD-wrt NXT,anybody knows it still exist?
Since the UI is simplified.
I need to install Astrill Applet into it,that needs myPage in tab Status.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum