Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r40750 std (08/23/19)
Kernel VersionLinux 3.18.140 #51274 Fri Aug 23 03:33:27 +04 2019 mips
Upgrade from r40723 via telnet
Reset: yes
Working OK as AP, HT40, NG-mixed
Problems: none
Reset button is working again
WNDR3700v4
DD-WRT v3.0-r40750 std (08/23/19)
Linux 3.18.140 #51312 Fri Aug 23 04:16:01 +04 2019 mips
used as WAN disable switch / ovpn server / samba share ext4
GUI install over r40723 ...NO reset
everything working very well
#
WRT160NL
DD-WRT v3.0-r40750 std (08/23/19)
Linux 3.10.108-d8 #19428 Fri Aug 23 02:51:19 +04 2019 mips
used as WAN disable switch / samba share
GUI install over r40723 ...NO reset
he didn't even require a power cycle this time
tis all good
Problem: After configuring and applying the user input speed settings in the QoS tab, all connection to the router becomes lost. Even though the AP is broadcasting, clients can’t connect to the network.
Status: Up and running for 24 hours, basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS and OpenVPN server working
Errors: Yes
1. Samba does not start automatically have to do: sleep 10; stopservice samba3; startservice samba3
2. DNS leak see: http://svn.dd-wrt.com/ticket/6020
Resolved:
1. VPN works with QoS enabled (I did not test that extensively)
2. Pushed DNS servers from VPN provider are now used, if you do not want that, add the following to the Additional Config of the VPN client:
pull-filter ignore "dhcp-option DNS"
3. Reset button is working again
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sat Aug 24, 2019 10:51 Post subject:
AKA_SK wrote:
Router Model: D-Link DIR 859 A3
Doesn”t even run...
Problem: After configuring and applying the user input speed settings in the QoS tab, all connection to the router becomes lost. Even though the AP is broadcasting, clients can’t connect to the network.
Question,this new version of dd-wrt is supportable with mine TP-LINK TL-WR843ND v1.5?And yes this is the version with Atheros chip,because now are running other 3rd not tp-link OEM fw,but wanna try dd-wrt,not see this router in list.
I haven't changed a thing.
She is still HFSC FQ_CODEL_FAST
I like it and will leave it there
my daughter is here for the weekend and she does lots online so I will NOT tinker with main router for couple days
---
these clients are currently connected but I'm sure they will get very busy in just a short while.
still couple minutes before 8:00 AM this Saturday morning here now
Problem: After configuring and applying the user input speed settings in the QoS tab, all connection to the router becomes lost. Even though the AP is broadcasting, clients can’t connect to the network.
using hfsc+cake?
I used htb+cake. Mind you this happened even after clearing the nvram before and after the flash.