New builds do not send the hard-drives to stand-by

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
dance85
DD-WRT User


Joined: 02 Jun 2017
Posts: 157

PostPosted: Wed Aug 14, 2019 19:35    Post subject: New builds do not send the hard-drives to stand-by Reply with quote
Guys I have 2 hard disks connected to Western Digital and properly configured with Samba and Jffs. The problem is that with all the new builds instead of going on standby after a certain time as it always happened one of the two remains on. Does the same thing happen to you too? Now I'm stuck at 39572 and I don't have this kind of driver problem. Poor hard drives that stay on.
I tried also with hdparm but nothing ... hdparm -S 240 / dev / sda
Sponsor
dance85
DD-WRT User


Joined: 02 Jun 2017
Posts: 157

PostPosted: Sun Aug 18, 2019 8:12    Post subject: Reply with quote
Aug 18 10:00:28 Black Shark daemon.info smartd[1631]: Device: /dev/sdb [SAT], not capable of SMART self-check
Aug 18 10:00:31 Black Shark daemon.info smartd[1631]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 3 Spin_Up_Time changed from 181 to 182
Aug 18 10:00:31 Black Shark daemon.info smartd[1631]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 109 to 113


this wakes me up when I decide to go on standby.
Help me Please!!!
dance85
DD-WRT User


Joined: 02 Jun 2017
Posts: 157

PostPosted: Sun Aug 18, 2019 8:19    Post subject: Reply with quote
only happens with new builds.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum