New build: 08-14-2019-r40634

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page 1, 2  Next
Author Message
illuminati_tri
DD-WRT Novice


Joined: 15 Jul 2019
Posts: 41
Location: Texas

PostPosted: Wed Aug 14, 2019 17:23    Post subject: New build: 08-14-2019-r40634 Reply with quote
FTP: ftp://ftp.dd-wrt.com/betas/2019/08-14-2019-r40634/

Download: https://dd-wrt.com/support/other-downloads/?path=betas%2F2019%2F08-14-2019-r40634%2F

Edit: Ticket says build won't flash on 1900ACS V2 (https://svn.dd-wrt.com/ticket/6751). Others have managed to successfully flash, however.
I myself have not attempted to flash yet.

_________________
Linksys WRT3200ACM r41586
- ExpressVPN | VAP & PBR | Synology NAS


Last edited by illuminati_tri on Wed Aug 14, 2019 23:27; edited 1 time in total
Sponsor
vanastasis
DD-WRT Novice


Joined: 31 Oct 2012
Posts: 4

PostPosted: Wed Aug 14, 2019 17:36    Post subject: Reply with quote
Flashed on partition 1

working & all seems fine at the moment.

_________________
Linksys WRT1900ACS v2 - DD-WRT v3.0-r40634 std (08/14/19)
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 115

PostPosted: Wed Aug 14, 2019 18:28    Post subject: Reply with quote
Upgraded WRT1200AC v1 from r40134 to r40634 using Waterfox 56.2.12 (64 bit) running on Linux Mint 19.1 OS. Usual yellows in syslog.

Ran command "ubootenv set boot_part 2" before update. Successful update and reboot for r40634. Initial wireless security options "Undefined" but manual reboot fixed the problem. Up-time around 30 minutes. Immediate connection of wireless/wired devices. VPN working as expected. I don't have NAS so no info on that.

Kernel Version Linux 4.9.189 #1221 SMP Wed Aug 14 03:31:11 CEST 2019 armv7l

Aug 14 13:55:08 router daemon.notice openvpn[1714]: OpenVPN 2.4.7 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Aug 14 2019
Aug 14 13:55:08 router daemon.notice openvpn[1714]: library versions: OpenSSL 1.1.1c 28 May 2019, LZO 2.09

Edit: Up-time around six hours with no drops vpn, wired or wireless Running very smooth

Only issue is the red syslog warning (1 instance in six hrs)
Aug 14 19:36:17 router daemon.info httpd[3075]: httpd : Authentication fail
Aug 14 19:36:17 router daemon.err httpd[3075]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases


Last edited by Monza on Wed Aug 14, 2019 23:43; edited 1 time in total
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 608
Location: behind the screen

PostPosted: Wed Aug 14, 2019 20:14    Post subject: Reply with quote
webflash via
Google Chrome
Version 76.0.3809.100 (Official Build) (64-bit)

MAC Address60:38:E0:B7:F8:E2
Chipset 88W8964 802.11ac
RadioRadio is On
ModeWDS Station
NetworkAC/N-Mixed
SSIDgypsynet_5g
Channel157 + 155 (5785 MHz VHT80)
Busy Time7216 ms
Active Time409611 ms
Channel Quality99%
TX Power30 dBm
Rate1300 Mb/s
ACK TimingN/A
Encryption - Interface ath0Enabled, WPA2-PSK
Connected Clients1

username set to root
Aug 14 14:05:07 DD-WRT b7:f8:e1 daemon.info httpd[1846]: httpd : Authentication fail
Aug 14 14:05:07 DD-WRT b7:f8:e1 daemon.err httpd[1846]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases

Running fine so far

_________________
WRT3200ACM openwrt 18.06.4
WRT3200ACM dd-wrt r41586
WRT54GL dd-wrt r21676
dance85
DD-WRT User


Joined: 02 Jun 2017
Posts: 171

PostPosted: Wed Aug 14, 2019 21:43    Post subject: Reply with quote
WRT3200ACMV2 Guys I have 2 hard disks connected to Western Digital and properly configured with Samba and Jffs. The problem is that with all the new builds instead of going on standby after a certain time as it always happened one of the two remains on. Does the same thing happen to you too? Now I'm stuck at 39572 and I don't have this kind of driver problem. Poor hard drives that stay on.
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 169

PostPosted: Wed Aug 14, 2019 23:05    Post subject: Reply with quote
Flashed with FF68.0.1x64. No issues. All functions working as expected.
_________________
Netgear R9000 X10
DD-WRT v3.0-r41664 std (12/06/19)
AP, DNSMasq, Local DNS
CloudFlare DNS
QoS using HFSC w/FQ_CODEL_FAST
Static Leases & DHCP
2.4GHz: 3 + 7 (2422 MHz HT40)
5GHz: 161 + 155 (5805 MHz VHT80)
Xfinity 1Gbps/35Mbps
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 300

PostPosted: Wed Aug 14, 2019 23:06    Post subject: Re: New build: 08-14-2019-r40634 Reply with quote
Quantity:2 WRT1900ACS V2 routers both successfully flashed to r40634 on PARTITION 1. Partition 2 remains r40134.


illuminati_tri wrote:


Edit: Ticket says build won't flash on 1900ACS V2 (https://svn.dd-wrt.com/ticket/6751).
I myself have not attempted to flash yet.

_________________
WRT1900ACSv2
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 200
Location: South Carolina

PostPosted: Thu Aug 15, 2019 2:46    Post subject: DD-WRT v3.0-r40634 std (08/14/19) Reply with quote
WRT3200ACM V1 r40634 Firefox 68.0.1 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
Johnb175
DD-WRT Novice


Joined: 08 Oct 2010
Posts: 49

PostPosted: Thu Aug 15, 2019 14:11    Post subject: Reply with quote
Flashed on my WRT3200ACM from 35868 to this build on partition 1. Only had one problem. I am using MAC filtering on my 2.4 and 5Ghz Wi-Fi. One LG android phone will not connect. All other wireless devices connect. I removed the MAC from the MAC filtering list, applied, re-added it, applied and still not luck. I rebooted the phone, removed the network and re-added on the phone also with no success. If I turn off MAC filtering it connects right away. In the previous build (35868) this LG phone worked. Temporarily I joined to my guest SSID which does not have MAC filtering turned on and it worked. Anyone seen anything like this?
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 608
Location: behind the screen

PostPosted: Thu Aug 15, 2019 19:00    Post subject: Reply with quote
WDS Station
SFE Enabled

Same problem here AGAIN, after awhile no access to the GUI

r40559 does NOT have that problem Smile

_________________
WRT3200ACM openwrt 18.06.4
WRT3200ACM dd-wrt r41586
WRT54GL dd-wrt r21676
PavelVD
DD-WRT Novice


Joined: 26 Jul 2019
Posts: 30

PostPosted: Thu Aug 15, 2019 19:36    Post subject: Reply with quote
dance85 wrote:
WRT3200ACMV2 Guys I have 2 hard disks connected to Western Digital and properly configured with Samba and Jffs. The problem is that with all the new builds instead of going on standby after a certain time as it always happened one of the two remains on. Does the same thing happen to you too? Now I'm stuck at 39572 and I don't have this kind of driver problem. Poor hard drives that stay on.
I met a similar message, but on the contrary, the person was not happy that his disks were falling asleep. He found a way out: with the help of smart utilities, he changed the parameters for switching to sleep. Can this approach help you?
dance85
DD-WRT User


Joined: 02 Jun 2017
Posts: 171

PostPosted: Fri Aug 16, 2019 13:27    Post subject: Reply with quote
hdparm does not work!!! Help Please!!!
mark7277
DD-WRT Novice


Joined: 17 Nov 2017
Posts: 7

PostPosted: Fri Aug 16, 2019 14:05    Post subject: 1GB setup for 1900ac v1? Reply with quote
Is there any way to get the 1gb out of the 1900ac v1?

I have the service but can not for the life of me get the thing to come close to that when plugged in to 1900ac? I get it if i plug in to cable modem. I am on the newest firmware and it has been working like a charm! If any one can help with set up would be great!!
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 608
Location: behind the screen

PostPosted: Fri Aug 16, 2019 21:10    Post subject: Reply with quote
Johnb175 wrote:
Flashed on my WRT3200ACM from 35868 to this build on partition 1. Only had one problem. I am using MAC filtering on my 2.4 and 5Ghz Wi-Fi. One LG android phone will not connect. All other wireless devices connect. I removed the MAC from the MAC filtering list, applied, re-added it, applied and still not luck. I rebooted the phone, removed the network and re-added on the phone also with no success. If I turn off MAC filtering it connects right away. In the previous build (35868) this LG phone worked. Temporarily I joined to my guest SSID which does not have MAC filtering turned on and it worked. Anyone seen anything like this?
I'm sure you mean "Permit only clients listed to access the wireless network"

The LG android phone is on the list? It could be a bug with the wifi driver not dd-wrt.

_________________
WRT3200ACM openwrt 18.06.4
WRT3200ACM dd-wrt r41586
WRT54GL dd-wrt r21676
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 115

PostPosted: Sat Aug 17, 2019 0:01    Post subject: Reply with quote
This release has worked well for me with no issues for a couple of days. I disabled the vpn for a time but, as with the last two releases, when I enabled, saved, applied the vpn client the GUI came up garbled and in text format. First time with this release as I have disabled/enabled vpn several times since upgrading to this release. Previously I had to reboot the router to get the GUI back as I ASSUMED the GUI was not working in the garbled state.

This time I clicked on the "Wireless" text link on the garbled GUI and it went back to the wireless tab with the GUI appearing and working as expected. If others experience the GUI corruption you might try using the tab text links to get it back up before rebooting.

Normally I would revert to my last stable release but this release has noticeably improved my download and streaming speed so I'll continue to use it unless I have other issues. Thought I would pass this along but it may not work for everyone.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum