I see:
dd-wrt.K3_R7000.chk
dd-wrt.K3_R7000P.chk
dd-wrt.v24-K3_AC_ARM_R7000P.bin
Whats difference between v24-k3 and k3 ?
Also, from what I read, the chk files are for initial flashing from stock Netgear, from which you can then use bin files to update to whatever version. But the r7000 only gives the chk files, and the bin file is for r7000p, which is a different router version than what I have.
So for a plain R7000 you need the dd-wrt.v24-K3_AC_ARM_STD.bin
Before upgrading make screenshots or notes of your settings
After upgrading telnet into your router and do:
Code:
nvram erase && reboot
Put settings in manually do not restore from backup
if you use UDP port forwarding and/or Policy based routing for VPN client be sure to disable Shortcut Forwarding Engine on Setup page and after disabling reboot the router
I haven't seen .bin Kong R7000 files lately, but the .CHK files upgrade works in ddwrt no probs.
The latest kong bin file is here http://www.desipro.de/ddwrt/K3-AC-Arm/
Is that not often enough for you? _________________ I am far from a guru, I'm barely a novice.