Beacon Interval (ms) Best Number?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
singo
DD-WRT User


Joined: 04 Aug 2006
Posts: 214
Location: Japan

PostPosted: Mon Jul 15, 2019 19:57    Post subject: Beacon Interval (ms) Best Number? Reply with quote
Anyone has the best number for beacon interval for 2.4Ghz and 5Ghz?

Thanks

_________________
シンゴ
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 4631
Location: Texas

PostPosted: Mon Jul 15, 2019 20:17    Post subject: Reply with quote
Prolly just whatever works good for your setup and suits you Laughing
my main router, EA8500, 2.4 = 181 and 5GHz = 193
my two WDS bridges (one is broadcom 54G routers other is atheros N routers) that have been up for years
and only bridged to each other with only wired WAPs and other wired clients.
all their 'Beacon Interval' set at 983
Cool
singo
DD-WRT User


Joined: 04 Aug 2006
Posts: 214
Location: Japan

PostPosted: Mon Jul 15, 2019 20:20    Post subject: Reply with quote
mrjcd wrote:
Prolly just whatever works good for your setup and suits you Laughing
my main router, EA8500, 2.4 = 181 and 5GHz = 193
my two WDS bridges (one is broadcom 54G routers other is atheros N routers) that have been up for years
and only bridged to each other with only wired WAPs and other wired clients.
all their 'Beacon Interval' set at 983
Cool


how about each DTIM interval?

_________________
シンゴ
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 4631
Location: Texas

PostPosted: Mon Jul 15, 2019 20:26    Post subject: Reply with quote
singo wrote:
how about each DTIM interval?

'DTIM interval' = 2 on everything I use ...including broadcom units Razz
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7004
Location: Winnipeg, Canada

PostPosted: Tue Jul 16, 2019 7:32    Post subject: Reply with quote
theres no best u need to search these 2 values and find out with low and high does, &/or see ddwrt wifi wiki
_________________
LATEST FIRMWARE(S) || Qualcomm Atheros Wi-Fi Settings Guide || Qualcomm Atheros Repeating

[QUALCOMM] R7800 ---------------> DD-WRT v3.0-r40270M kongat
[QUALCOMM] DIR-862L ------------> DD-WRT v3.0-r40734 std
[QUALCOMM] WNDR4300 v1 ------> DD-WRT v3.0-r40734 std
[QUALCOMM] DIR-862L ------------> DD-WRT v3.0-r40734 std
▲ ACTIVE / INACTIVE ▼
[BROADCOM] DIR-860L A1 --------> DD-WRT v3.0-r40634 std

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
msoengineer
DD-WRT User


Joined: 21 Jan 2017
Posts: 445
Location: Illinois

PostPosted: Tue Jul 16, 2019 15:08    Post subject: Reply with quote
Here is what I have been using and think should be added to the wifi best settings wiki:

https://www.dslreports.com/forum/r14241618-Theory-on-Optimizing-a-802-11-Beacon.

Which ever radio you want to pick up first should have the shorter interval. I am using 163 on 5ghz and 191 on 2.4ghz.
DTIM=2

Here is a list of prime numbers:
https://en.wikipedia.org/wiki/List_of_prime_numbers

The theory is that if you use a prime number, the statistical probability of ever overlapping with a neighbor, or your own beacon on the other wifi radio in your own router, never occurs.

_________________
[r9000] running BS 40723
[EA8500] running Kong 40270M
[R7800] KONG PRO [taking a nap...no qam256...]
[WDR3600] BS 36808


TIPS-A MUST READ:

Best QCA Wifi settings to use|Latency tricks|QoS Port priority

Why to NOT use MU-MIMO||Max Wifi Pwr by Country||MCS Index Speeds||Correct QCA 5Ghz chnls to use||WIFI Chnl Freq WIKI
singo
DD-WRT User


Joined: 04 Aug 2006
Posts: 214
Location: Japan

PostPosted: Tue Jul 16, 2019 15:10    Post subject: Reply with quote
msoengineer wrote:
Here is what I have been using and think should be added to the wifi best settings wiki:

https://www.dslreports.com/forum/r14241618-Theory-on-Optimizing-a-802-11-Beacon.

Which ever radio you want to pick up first should have the shorter interval. I am using 163 on 5ghz and 191 on 2.4ghz.
DTIM=2

Here is a list of prime numbers:
https://en.wikipedia.org/wiki/List_of_prime_numbers

The theory is that if you use a prime number, the statistical probability of ever overlapping with a neighbor, or your own beacon on the other wifi radio in your own router, never occurs.


this is perfect, let me study first!!!

if on 2.4ghz i have 6+ devices but all devices only smart home devices, and <6 clients for 5ghz

what is your recommendations? for the settings?

_________________
シンゴ
msoengineer
DD-WRT User


Joined: 21 Jan 2017
Posts: 445
Location: Illinois

PostPosted: Tue Jul 16, 2019 15:26    Post subject: Reply with quote
singo wrote:
this is perfect, let me study first!!!

if on 2.4ghz i have 6+ devices but all devices only smart home devices, and <6 clients for 5ghz

what is your recommendations? for the settings?


As suggested above, pick some values and see how they work in your environment. The DSLREPORTS link helps answer your question too...

_________________
[r9000] running BS 40723
[EA8500] running Kong 40270M
[R7800] KONG PRO [taking a nap...no qam256...]
[WDR3600] BS 36808


TIPS-A MUST READ:

Best QCA Wifi settings to use|Latency tricks|QoS Port priority

Why to NOT use MU-MIMO||Max Wifi Pwr by Country||MCS Index Speeds||Correct QCA 5Ghz chnls to use||WIFI Chnl Freq WIKI
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1375
Location: Canada

PostPosted: Sun Jul 21, 2019 0:24    Post subject: Reply with quote
The Beacon default is 100ms (I would use 101 to be different from neighbors). The DTIM default is 2 (I don't change it)

I use this formula that I made up as a reference...
75ms * (1+#VAPs) + 1 = Beacon Interval

On my 2.4Ghz Radio I have 2 VAPs with Beacon at 226
The 5Ghz Radio has 1 VAPs with Beacon at 151

_________________
Home Network on Telus PureFibre - Wired GigaBit Backbone
| 2x DNSCrypt-Proxy V2 | DHCPv4/v6 via DNSMasq | Telus-IPv6 |
| USB Storage - Scripts Only | 7x VLANs/BRs | WiFi 5x SSIDs |
| 3x OpenVPN-Clients | QoS | SSH | Entware | YAMon3 | Ad-Blocking |

R7800 Gateway & VPN1 - KONGAT 39855M Release 2019-05-25
R7800 WiFi & VPN2 & VPN3 - KONGAT 39855M Release 2019-05-25

______________________
YAMon 3.4 | Ad-Blocking for DD-WRT | DNSCrypt-Proxy V2
DD-WRT Beta Builds | KONG Builds
CloneVince's copies of Kong's Arm Firmware
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum