Joined: 05 Apr 2017 Posts: 981 Location: Louisiana, USA
Posted: Sun Aug 19, 2018 1:31 Post subject:
ramx2 wrote:
I flashed the WRT32X to OpenWRT then flashed it back to DDWRT, I'm having problems with the WIFI which is really slow... Is there a way to flash back the Original firmware from DDWRT?
After some deep reading so I've wiped the venom firmware partition by flashing the Openwrt from the Venom UI?
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
I flashed the WRT32X to OpenWRT then flashed it back to DDWRT, I'm having problems with the WIFI which is really slow... Is there a way to flash back the Original firmware from DDWRT?
After some deep reading so I've wiped the venom firmware partition by flashing the Openwrt from the Venom UI?
Yeah! I flashed it back to Venom, what's with your Linksys Venom v1.0.180404.58 (modified) firmware? what's special about it ?
Can we flash the WRT32X To Oem Linksys firmware wrt3200ACM ?
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
The venom firmware isn't capable of giving me the full internet speed over the ethernet, it looks there's bottleneck in the firmware. I've even opened a ticket with Linksys to check the problem. The maximum speed I was able to get around 850~750 Mbps. I decided to flash OpenWrt to check if it has the same limitations. After doing the speed test I got the same Venom firmware results.
DDWRT firmware is capable to get me the full internet speed over the ethernet which is 940~+ Mbps, I assume OpenWrt has some sort of limitations, in which DDWRT doesn't. On OpenWrt 5Ghz didn't work, and DDWRT is only allowing me to get 60 Mbps over the Wifi :S
I'd rather to stay on Venom meanwhile until this router gots the full support, Which I really dislike since it's has a lot of limitations... We can't disable DHCP from the UI! Seriously! lol
That's why I've asked about the WRT3200 oem Firmware..
Joined: 05 Apr 2017 Posts: 981 Location: Louisiana, USA
Posted: Mon Aug 20, 2018 3:25 Post subject:
ramx2 wrote:
The venom firmware isn't capable of giving me the full internet speed over the ethernet, it looks there's bottleneck in the firmware. I've even opened a ticket with Linksys to check the problem. The maximum speed I was able to get around 850~750 Mbps. I decided to flash OpenWrt to check if it has the same limitations. After doing the speed test I got the same Venom firmware results.
I wish I could verify for you, but my ISP's fastest available speed is 300/30. Sorry!
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Installed the build 40400 in my wrt32x. So far, it is working fine _________________ Linksys WRT32X, Linksys EA6500 v1, TP-Link TL-WR842ND
Spectrum 940/35 mbit
HI All, i want to buy this router "Linksys AC3200 Dual-Band WiFi Gaming Router with Killer Prioritization Engine" I like the design. Is it possible to flash it to WRT3200ACM?
I just installed the firmware on my 32X and at first it would not take the img file. I was attempting the newest listed (v3.0 build 40559) and it seems that it was too large. I instead went with the oldest listed (v3.0 build 36247) and it worked like a charm. It's important to note that the oldest listed version was smaller than the newest, not by much but that seems to have made all of the difference.
Nothing working and the hardwired works wirelss is not working anymore on my router
here is the download
/tmp# wget https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/
2019/10-01-2019-r41218/linksys-wrt32x/FW_WRT32X_1.0.666_DDWRT.img
Downloading 'https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/10-01-2019-r41218/linksys-wrt32x/FW_WRT32X_1.0.666_DDWRT.img'
Connecting to 185.84.6.100:443
# custom headers to add: 0
Writing to 'FW_WRT32X_1.0.666_DDWRT.img'
FW_WRT32X_1.0.666_DD 100% |*******************************| 11320k 0:00:00 ETA
Download completed (11591855 bytes)
The install
# sysupgrade -F -n FW_WRT32X_1.0.666_DDWRT.img
killall: watchdog: no process killed
Sending TERM to remaining processes ... connled logd rpcd netifd crond udhcpc siproxd uhttpd miniupnpd ntpd sleep ubusd askfirst dnsmasq /sbin/sysupgrade: line 237: can't open /proc/9011/cmdline: no such file
dnsmasq
Sending KILL to remaining processes ... askfirst
Switching to ramdisk...
Performing system upgrade...
cannot find ubi mtd partition rootfs1
libubi: error!: "/dev/" is not a character device
ubiupdatevol: error!: error while probing "/dev/"
error 22 (Invalid argument)
libubi: error!: "/dev/" is not a character device
ubiupdatevol: error!: error while probing "/dev/"
error 22 (Invalid argument)
sysupgrade successful