Jason,
I need to update my sig.
Actually my current setup is
R7000 - Router (XVortex Merlin fork with adblock & IP blocking enabled) & r7800 running Kong openWRT 19.07 as an AP.
I am not the best resource for openwrt config questions. Just running as an AP based on google found settings. _________________ Router currently owned:
Netgear R7800 - Router
Netgear R7000 - AP mode
Joined: 19 Oct 2015 Posts: 3 Location: Cleveland,Ohio USA
Posted: Thu Jul 18, 2019 12:36 Post subject:
I have this installed on my R7800,all is working great.
Using net share with usb installed that is working, but i'm trying to get HD Idle to work, i've downloaded an installed but it does not show up under services to adjust settings any help in what to do.
I have this installed on my R7800,all is working great.
Using net share with usb installed that is working, but i'm trying to get HD Idle to work, i've downloaded an installed but it does not show up under services to adjust settings any help in what to do.
Hi, what are the main difference from this kong build and the hnyman one?
I want to try the OpenWrt but I don't know if I can do all that I'm doing with dd-wrt
It contains performance fixes + custom theme + package repo + extra features.
Ok thanks.
I read on openwrt that with 19.07 there's no installable packages from buildbot, at least on hnyman's release, so here all the packages are installable, I understand correctly?
@<Kong>
What do you think is better for R7800? OpenWrt or dd-wrt, my hope is to have a quite stable build that sometimes I've to update.
Any advice?
Hi, what are the main difference from this kong build and the hnyman one?
I want to try the OpenWrt but I don't know if I can do all that I'm doing with dd-wrt
It contains performance fixes + custom theme + package repo + extra features.
Ok thanks.
I read on openwrt that with 19.07 there's no installable packages from buildbot, at least on hnyman's release, so here all the packages are installable, I understand correctly?
</quote>
All the ones, that I build, right now about 1000 packages.
@<Kong>
What do you think is better for R7800? OpenWrt or dd-wrt, my hope is to have a quite stable build that sometimes I've to update.
Any advice?
Openwrt updates are more consistent, means updates should not break things that have been working previously. DD-WRT is a rolling release, new features come in fast, but you never know what an update breaks. That's why my main router runs on my Openwrt build now. _________________ KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
Joined: 19 Oct 2015 Posts: 3 Location: Cleveland,Ohio USA
Posted: Fri Jul 19, 2019 13:32 Post subject:
jerrytouille wrote:
unclebud wrote:
I have this installed on my R7800,all is working great.
Using net share with usb installed that is working, but i'm trying to get HD Idle to work, i've downloaded an installed but it does not show up under services to adjust settings any help in what to do.
did u install the luci app ui component?
I installed the luci app it now shows in services,i enabled but it will not idle,its a 2tb WD passport
it idles down fine in DD-WRT builds, any ideas?
Hi, what are the main difference from this kong build and the hnyman one?
I want to try the OpenWrt but I don't know if I can do all that I'm doing with dd-wrt
It contains performance fixes + custom theme + package repo + extra features.
Ok thanks.
I read on openwrt that with 19.07 there's no installable packages from buildbot, at least on hnyman's release, so here all the packages are installable, I understand correctly?
All the ones, that I build, right now about 1000 packages.
Chryses wrote:
@<Kong>
What do you think is better for R7800? OpenWrt or dd-wrt, my hope is to have a quite stable build that sometimes I've to update.
Any advice?
Openwrt updates are more consistent, means updates should not break things that have been working previously. DD-WRT is a rolling release, new features come in fast, but you never know what an update breaks. That's why my main router runs on my Openwrt build now.
Very good, where I can see the repository? Before install I want to check the all packages I need are in place, I think so but just to check before
At the end I've to put openvpn server + client + pbr + ddns (no-ip)
I did try the latest 19.07 and build is still not optimized for cake qos. The maximum speed is only 280 mbs out of my 570mbs cable ISP.
The bufferbloat is not much better compare to DDWRT for my setup and ISP. The GUI is crazy over complicated and user have to be Linux guru.
Back to Kong-DDWRT and happy for now _________________ Netgear R7800
anything we can look forward to or not worth anything? _________________ modem: arris tm1602
router: r7800 voxel 1.0.2.77sf w/ kamoj 5.3b12 addon
ap: wrt1900ac v1 bs 43136,dir-825 b1 bs41117
NAS: Iomega ix2-200 CE 4tb, Seagate 1tb usb drive
Wash your hands and DONT TOUCH YOUR FACE!!!
After sticking with Kong's DD-WRT builds for years, keen to try this. Are there any good resources to look at with rwgrd to setup, including guest WiFi? Looked on Open-wrt site but all guides appear to be command line, and not with the LuCi GUI - unless I'm looking in the wrong places?