New Build 07-16-2019-r40352

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page 1, 2, 3  Next
Author Message
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Wed Jul 17, 2019 0:13    Post subject: New Build 07-16-2019-r40352 Reply with quote
ftp://ftp.dd-wrt.com/betas/2019/07-16-2019-r40352/

Firmware Version
DD-WRT v3.0-r40352 std (07/16/19)
Kernel Version
Linux 4.9.185 #1153 SMP Tue Jul 16 06:46:47 CEST 2019 armv7l

Webflashed successfully to Partition1 from Partition2 using R40134.

Webflash was NOT successful to Partition2 and reverted to Partition1.

Currently running R40352 on Partition1 and R40134 on Partition2.

_________________
WRT1900ACSv2


Last edited by DaveI on Wed Jul 17, 2019 17:37; edited 1 time in total
Sponsor
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Wed Jul 17, 2019 1:41    Post subject: v3.0-r40352 std (07/16/19) Reply with quote
WRT3200ACM V1 r40352 Firefox 68 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
dyilmaz
DD-WRT Novice


Joined: 26 Aug 2016
Posts: 49

PostPosted: Wed Jul 17, 2019 8:54    Post subject: r40352 firmware upgrade on WRT1900ACS V2 Reply with quote
Webflash upgrade process has completed successfully on my WRT1900ACS V2 but it restored the previous firmware release back automatically after the reboot.

Something wrong again!
RotoBill
DD-WRT Novice


Joined: 13 Feb 2019
Posts: 47

PostPosted: Wed Jul 17, 2019 14:27    Post subject: Reply with quote
I too am unable to make it work... my 3200 with nordvpn connects to everything except those listed on the PBR list. If someone has a similar setup and is successful, please let me know, cuz I'm a real beginner. So again, thanks to BS and all. I've gone back to 6-27-19.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Wed Jul 17, 2019 15:54    Post subject: Subject change Reply with quote
Can we change this thread's title to New Build 07-17-2019-r40352
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Wed Jul 17, 2019 17:38    Post subject: Re: Subject change Reply with quote
Oops...Out of practice after my 3 week excursion...
Changed to the correct release date of 07-16-2019


MLandi wrote:
Can we change this thread's title to New Build 07-17-2019-r40352

_________________
WRT1900ACSv2
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Wed Jul 17, 2019 19:51    Post subject: Reply with quote
working pretty good for me, went to both partitions just fine as well from the GUI. used firefox.
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Wed Jul 17, 2019 20:26    Post subject: Reply with quote
Just discovered r40352 BROKE my connected NAS Drive...Verified by switching to r40134 and was working fine. Reflashed partition1 to r40134 and NAS restored to working order...So back to r40134 on both partitions. Will advise BS via ticket...
_________________
WRT1900ACSv2
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Wed Jul 17, 2019 21:06    Post subject: Reply with quote
Anyone try the GUI switch config?

ie: Virtual Local Area Network (VLAN)

_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
giles02134
DD-WRT User


Joined: 25 Feb 2007
Posts: 142

PostPosted: Wed Jul 17, 2019 22:17    Post subject: Reply with quote
Seems that R40134 is the most stable current release. Until there's a really compelling reason to upgrade, I'm staying where I am.
_________________
Router: Linksys WRT1900ACSv2
Modem: Verizon Fios
DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Thu Jul 18, 2019 13:29    Post subject: Reply with quote
I tried the 07/16/2019 version. Failed. All worked well until I enabled OpenVPN. The VPN connected but no DNS services worked. No DNS requests succeeded. Reverted back to 40134, the 6/27/2019 version. All working properly. I will try the next version.
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Thu Jul 18, 2019 13:56    Post subject: Reply with quote
MLandi wrote:
I tried the 07/16/2019 version. Failed. All worked well until I enabled OpenVPN. The VPN connected but no DNS services worked. No DNS requests succeeded. Reverted back to 40134, the 6/27/2019 version. All working properly. I will try the next version.


I don't mean to be captain obvious, but is the flash memory smaller on the 1900, therefor causing these assorted issues with the 1900's? Flash size becoming too big? Or is something else going on?
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Thu Jul 18, 2019 14:03    Post subject: Reply with quote
No, the size went from 41,476k to 41,860k
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Thu Jul 18, 2019 14:51    Post subject: Reply with quote
MLandi wrote:
No, the size went from 41,476k to 41,860k


Any gut feelings what it might be? I'm not seeing it with a 3200 (Knock on wood), but am intrigued by what it could be.
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 267

PostPosted: Thu Jul 18, 2019 15:02    Post subject: Reply with quote
The wrt3200acm and wrt32x are not affected by the partition 2 smaller size problem as they have double the flash size of the wrt1x00 series (256MB vs 128MB).

40352 size for wrt1x00 is the same as the last few builds so no change on the partition 2 problem.

40167 - ok - 37.63MB 39456768
40189 - not ok - 37.88MB 39718912
40260 - not ok - 39718912
40276 - not ok - 39718912
40352 - not ok - 39718912

_________________

Netgear R7800 kongpro 19.07 20190919 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum