Alternate Flash Method required for me. (tried firefox and opera)
"shahabkhan99" method
go to Administrator>Command (paste this)
1: ubootenv set boot_part 2
2: DO NOT REBOOT
3: Flash new WEBFLASH from Firmware Upgrade - DO NOT RESET.
I personally used the console to do it.
ubootenv get boot_part ( says 1 )
ubootenv set boot_part 2
cd /tmp
wget firmware from ftp site.
write frimware linux
reboot _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Last edited by PIZZEDMEOFF on Fri Jul 12, 2019 19:41; edited 2 times in total
I opened a ticket to make them aware we must be at the limit, I sat here reflashing over and over and sometimes it goes, and sometimes it does not.. same with last build. since some of us are not having issues and some are so i just wanted to make them aware. who knows..... shrug. _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
WRT1900ACv1
I also couldn't flash from r40188 to r40276 - it would restart without changing.
I used the command in the first post:
ubootenv set boot_part 2
Success! _________________ ------------------------------------
Netgear XR500 OpenWrt-23.05.3 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Linksys WRT3200ACM DD-WRT r55779 (spare Wired AP)
Netgear WNDR3700v4 DD-WRT r55779 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
40167 was the last version that flashed without complaints but it has webui problem.
From 40189 onwards, people were reporting flashing difficulties. _________________
Netgear R7800 kongpro 19.07 20190919 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
Joined: 30 May 2017 Posts: 582 Location: Rural Manitoba
Posted: Sat Jul 13, 2019 2:36 Post subject:
nickant wrote:
WRT1900ACv1
I also couldn't flash from r40188 to r40276 - it would restart without changing.
I used the command in the first post:
ubootenv set boot_part 2
Success!
Just tried on my 1900 V1. Same results.
It seems these recent builds will only load into Partition 1 _________________ Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55723
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN
WRT3200acm r55723 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r55723 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55723
2.4Ghz AP Ch1 HT20 Mixed
WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55723
2.4Ghz AP Ch1 HT20 Mixed
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use
Joined: 10 Nov 2018 Posts: 350 Location: South Carolina
Posted: Sat Jul 13, 2019 14:03 Post subject: DD-WRT v3.0-r40276 std (07/12/19)
WRT3200ACM V1 r40276 Firefox 68 (64-bit) webflash
OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine
I too have been unable to make the last two versions work on my 3200 with NordVPN. Specifically any device listed in my PBR list won't connect. Since I have a large list of static leases, I always avoid doing a reset.
I do like to stay up to date and again I thank BS and all the super users, but I'm staying with 6-27-19.
Joined: 04 Aug 2012 Posts: 612 Location: behind the screen
Posted: Sat Jul 13, 2019 23:53 Post subject:
I'ed like 2 see a offical Version
beta testing started /betas/2015/08-25-2015 4 the Linksys WRT AC Series _________________ WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
Joined: 10 Nov 2018 Posts: 350 Location: South Carolina
Posted: Sun Jul 14, 2019 0:56 Post subject:
d0ug wrote:
There is no such thing as a non-beta dd-wrt release. ddwrt is in perpetual beta mode. Basically a way of disclaiming any liabilities of you putting ddwrt on a production mission critical network without fully vetting the build yourself.
That said ddwrt is still in general more stable and robust than the garbage stock firmware in most SOHO routers.
Agreed. I tend to make notes of each release, and keep a copy. I have a few "favorites" and when things act up, I jump on back to that last favorite.
can one of you 3200 guys chime in on this post...
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320485
i am unsure of what older build he should flash from to go from factory to ddwrt.. thx. _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Joined: 04 Aug 2012 Posts: 612 Location: behind the screen
Posted: Sun Jul 14, 2019 18:23 Post subject:
d0ug wrote:
There is no such thing as a non-beta dd-wrt release. ddwrt is in perpetual beta mode. Basically a way of disclaiming any liabilities of you putting ddwrt on a production mission critical network without fully vetting the build yourself.