Router Model: Linksys EA8500 #1
Firmware: DD-WRT v3.0-r40260 std (07/09/19)
Kernel: Linux 4.9.184 #332 SMP Sat Jul 6 17:37:13 CEST 2019 armv7l
Previous: DD-WRT v3.0-r39855M
Mode: AP-Switch / QoS HFSC - FQ-CODEL/ Static DHCP x 21
Reset: No
Status: Working as expected
Router Model: Linksys EA8500 #2
Firmware: DD-WRT v3.0-r40260 std (07/09/19)
Kernel: Linux 4.9.184 #332 SMP Sat Jul 6 17:37:13 CEST 2019 armv7l
Previous: DD-WRT v3.0-r39855M
Mode: VPN AP-Switch / QoS HFSC - FQ-CODEL/ Static DHCP x 18
Reset: No
Status: OpenVPN client appears to establish tunnel but can't route outside LAN. Disabling DHCP didn't help. Same result with Kong r40270M. Exception: r40270M generated route add error. Still working as expected with r39855M.
20190712 17:34:08 I TUN/TAP device tun1 opened
20190712 17:34:08 TUN/TAP TX queue length set to 100
20190712 17:34:08 I /sbin/ifconfig tun1 192.168.179.17 pointopoint 192.168.179.18 mtu 1500
20190712 17:34:08 /sbin/route add -net 192.223.24.215 netmask 255.255.255.255 gw 192.168.1.254
20190712 17:34:08 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 192.168.179.18
20190712 17:34:08 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 192.168.179.18
20190712 17:34:12 I Initialization Sequence Completed
Client: CONNECTED SUCCESS
Local Address: 192.168.179.17
Remote Address: 192.168.179.18