Joined: 21 Nov 2013 Posts: 65 Location: Cathedral City, CA, USA
Posted: Thu Jul 11, 2019 0:10 Post subject:
Hello Everyone,
Router Model: R7800, using 7/11/2019 Build.
Status: Not working correctly.
Reset: No (will try full reset in a bit)
Errors: Yes
Wireless Physical Interface ath0 [5 GHz/802.11ac] - QCA9984 802.11ac did not come up properly, showed Unknown on Channel screen ( Status ), went to wireless config ( basic settings ) and there were a bunch of buttons with "undefined" on the screen and no way to select functions.
Flashed back to DD-WRT v3.0-r39830M kongat ( 05/23/19 ) and everything back to normal.
Printing my config out and will do a full reset and enter everything from scratch and see if problem continues.
Thanks Kong & BS for your great work _________________ Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r50671 std (10/26/22), Linux 4.9.330 #1313 SMP Wed Oct 26 05:13:03 +07 2022 armv7l
EA8500
DD-WRT v3.0-r40270M kongat (07/11/19)
Linux 4.9.185 #444 SMP Thu Jul 11 00:22:19 CEST 2019 armv7l
No reset --- GUI install over BS r40260
It's just used as a switch / ovpn server / samba share / couple ports are in a VLAN
yea, I enabled both its radios and they worky good ....using one now
ovpn server good & so is samba
just iffin anybody tis wondering ...'this new Kong build---
ath10k firmware ver 10.4.1.00030-1
dnsmasq-2.80-40-gc406fd6
unbound 1.9.1
OpenVPN 2.4.7
OpenSSL 1.1.1c
BS r40260---
ath10k firmware ver 10.4-3.5.3-00050 BS used the 10.4.1.00030-1 for couple builds then reverted back
dnsmasq-2.80
unbound 1.9.2
OpenVPN 2.4.7
OpenSSL 1.1.1c
'bout all I know
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Thu Jul 11, 2019 6:03 Post subject:
jerrytouille wrote:
^ reset needed coming from <40000 build. there are nvram params changed/added
I did it ddup with NO RESET ...all is working as it should...but i did clear the browser cache instead
will report later if any issues, so far so good.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
EA8500
Flashed r40270M over r39855M via GUI with no reset.
Came up as successfull, but no internet access (desktop/ethernet).
Rebooted EA8500 - still no internet.
Flashed r39855M over r40270M - internet now working.
Looks like I'll be staying on r39855M a bit longer - I don't want to spend an hour retyping all my settings and 20 static IP's...
I flashed r40270M and reset it, then tried to restore via r39855M backup; did not work. _________________ ------------------------------------
Netgear XR500 OpenWrt-23.05.3 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Linksys WRT3200ACM DD-WRT r55819 (spare Wired AP)
Netgear WNDR3700v4 DD-WRT r55779 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
Last edited by nickant on Fri Jul 12, 2019 0:17; edited 1 time in total
EA8500
Flashed r40270M over r39855M via GUI with no reset.
Came up as successfull, but no internet access (desktop/ethernet).
Rebooted EA8500 - still no internet.
Flashed r39855M over r40270M - internet now working.
Looks like I'll be staying on r39855M a bit longer - I don't want to spend an hour retyping all my settings and 20 static IP's...
Question: if I flash r40270M and reset it, can I restore via r39855M backup, or are these backups no longer compatible with >40000 firmwares?
I would think using a nvrambak.bin would put you right it the same place you were before.
Print to PDF the pages from your current setup.
I assume you can still copy text from a PDF done from a winders box.... I know I can from a print-to-PDF from my linux machine.
Anyways now days I have all my ovpn server stuff, static leases, firewall, some other goodies along with notes in a text file which makes it handy to copy/paste
Hi mrjcd.
I flashed r40270M and reset it, then tried to restore via r39855M backup; did not work.
I have printed out my settings - they're somewhere around here...
I might have to bite the bullet and retype or copy/paste everything again eventually.
Not hugely motivated - > 20 static IP + MAC addresses, as well as VPN settings etc..
r39855M has been very stable for me. _________________ ------------------------------------
Netgear XR500 OpenWrt-23.05.3 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Linksys WRT3200ACM DD-WRT r55819 (spare Wired AP)
Netgear WNDR3700v4 DD-WRT r55779 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
Hi mrjcd.
I flashed r40270M and reset it, then tried to restore via r39855M backup; did not work.
I have printed out my settings - they're somewhere around here...
I might have to bite the bullet and retype or copy/paste everything again eventually.
Not hugely motivated - > 20 static IP + MAC addresses, as well as VPN settings etc..
r39855M has been very stable for me.
since you have the EA8500 you can always just boot into other part iffin the one you install don't work to suit you.
Both boot_parts use the same nvram
mrjcd:
yes, when r40270M didn't work I tried turning EA8500 on/off 3-4 times within a few seconds, but I couldn't bring up the other partition with r39855M on it.
This has worked for me before.
I had to press the reset button on r40270M, then flash r39855M, then restore the r39855M backup. _________________ ------------------------------------
Netgear XR500 OpenWrt-23.05.3 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Linksys WRT3200ACM DD-WRT r55819 (spare Wired AP)
Netgear WNDR3700v4 DD-WRT r55779 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
mrjcd:
yes, when r40270M didn't work I tried turning EA8500 on/off 3-4 times within a few seconds, but I couldn't bring up the other partition with r39855M on it.
This has worked for me before.
I had to press the reset button on r40270M, then flash r39855M, then restore the r39855M backup.
best way to change boot_part if you have ssh or telnet is --
see close to bottom of this page ---> http://mrjcd.com/EA8500_DD-WRT/
mrjcd:
Good to know.
Although a bit hard to get to that page without internet access!
I'll print it out... _________________ ------------------------------------
Netgear XR500 OpenWrt-23.05.3 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Linksys WRT3200ACM DD-WRT r55819 (spare Wired AP)
Netgear WNDR3700v4 DD-WRT r55779 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
