cannot login to my tplink WR1043ND

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
dannyckp
DD-WRT Novice


Joined: 10 Jul 2019
Posts: 1

PostPosted: Wed Jul 10, 2019 11:24    Post subject: cannot login to my tplink WR1043ND Reply with quote
i flash my router to DDWRT. but i am not able to login to 192.168.1.1 as suggested.

it is redirected to http://192.168.1.1/cgi-bin/luci

and then come with response
This page isn’t working 192.168.1.1 didn’t send any data.
ERR_EMPTY_RESPONSE

i am running on windows 10.

please assist on how do access to the DDWRT CONTROL PANEL to setup the router.

i am newbie to ddwrt.

tq
Sponsor
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7183
Location: Columbus, Ohio

PostPosted: Wed Jul 10, 2019 12:36    Post subject: Reply with quote
I moved the thread to the correct forum.
Make pictures smaller.
Also try a different browser and/or clear your browser cache.

Always go back to stock firmware when you are on a custom firmware before flashing a different custom firmware.

_________________
I am far from a guru, I'm barely a novice.
adent
DD-WRT Novice


Joined: 06 Feb 2018
Posts: 30
Location: Vienna, Austria

PostPosted: Wed Jul 10, 2019 13:20    Post subject: Reply with quote
Default IP for this device is 192.168.11.1.
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7183
Location: Columbus, Ohio

PostPosted: Wed Jul 10, 2019 18:43    Post subject: Reply with quote
Default up on dd-wrt is 192.168.1.1. On stock if I’m not mistaken it’s 192.168.0.1.
_________________
I am far from a guru, I'm barely a novice.
h8red
DD-WRT Guru


Joined: 28 Jun 2011
Posts: 576
Location: Vilnius, Lithuania

PostPosted: Wed Jul 10, 2019 19:23    Post subject: Reply with quote
Try to ping 192.168.1.1
Clear your browser cache

_________________
[Ramips] Nexx WT3020F Openwrt @kernel #4.14.141 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
adent
DD-WRT Novice


Joined: 06 Feb 2018
Posts: 30
Location: Vienna, Austria

PostPosted: Wed Jul 10, 2019 19:47    Post subject: Reply with quote
192.168.11.1, as also stated in the answer to this quite old question:

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=774200

By the way., I own 2 devices of this type.
h8red
DD-WRT Guru


Joined: 28 Jun 2011
Posts: 576
Location: Vilnius, Lithuania

PostPosted: Wed Jul 10, 2019 20:07    Post subject: Reply with quote
adent wrote:
192.168.11.1, as also stated in the answer to this quite old question:

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=774200

By the way., I own 2 devices of this type.


It might be. If you have not updated since 2015

Edit: 2011 it`s always been 192.168.1.1

_________________
[Ramips] Nexx WT3020F Openwrt @kernel #4.14.141 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
adent
DD-WRT Novice


Joined: 06 Feb 2018
Posts: 30
Location: Vienna, Austria

PostPosted: Wed Jul 10, 2019 21:15    Post subject: Reply with quote
I got my first 1043nd 2 years ago, dipping into dd-wrt with r32170; default ip then was 192.168.11.1, which I decided to keep.
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7183
Location: Columbus, Ohio

PostPosted: Wed Jul 10, 2019 22:14    Post subject: Reply with quote
adent wrote:
I got my first 1043nd 2 years ago, dipping into dd-wrt with r32170; default ip then was 192.168.11.1, which I decided to keep.


But he/she has dd-wrt in it so the default ip is 192.168.1.1. Doesn’t matter what you decided to keep.

Wiki page says the stock it is 192.168.1.1

_________________
I am far from a guru, I'm barely a novice.
adent
DD-WRT Novice


Joined: 06 Feb 2018
Posts: 30
Location: Vienna, Austria

PostPosted: Wed Jul 10, 2019 23:02    Post subject: Reply with quote
Do not turn the word in my mouth. I resetted the device and went form stock fw (ip 192.168.1.1) to dd-wrt r32170 and the default ip afterwards was 192.168.11.1, period.
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7183
Location: Columbus, Ohio

PostPosted: Thu Jul 11, 2019 0:47    Post subject: Reply with quote
adent wrote:
Do not turn the word in my mouth. I resetted the device and went form stock fw (ip 192.168.1.1) to dd-wrt r32170 and the default ip afterwards was 192.168.11.1, period.


You are right, m sorry. All of us here have it wrong. My mistake.

_________________
I am far from a guru, I'm barely a novice.
adent
DD-WRT Novice


Joined: 06 Feb 2018
Posts: 30
Location: Vienna, Austria

PostPosted: Thu Jul 11, 2019 9:25    Post subject: Reply with quote
I read dannyckp's posting that (s)he is not able to login to 192.168.1.1 after flashing ddwrt and I told my experience, which might be useful. Not more, not less.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum