New Build 07-04-2019-r40189

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Thu Jul 04, 2019 21:54    Post subject: New Build 07-04-2019-r40189 Reply with quote
Downloads:
http site: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/07-04-2019-r40189/
ftp site: ftp://ftp.dd-wrt.com/betas/2019/07-04-2019-r40189/

SVN Timeline:
https://svn.dd-wrt.com/timeline


Yall give me a min im about to try to break stuff lol. ill post back how it went.

Update on situation:
Well i tried to update from the gui, twice and both times it rebooted back to the previous firmware...
Tried it from a reset, Same thing.

Found the issue:
this firmware is slightly bigger so the GUI bug applies to this one, you have to use the console to flash it.
other then that seems to be working alright to me, gui wise and the basics, and my configuration.

refresher course:
ubootenv get boot_part ( says 1 )
ubootenv set boot_part 2 ( to change to partition 2)
cd /tmp ( changes to temp directory
ftp site: ftp://ftp.dd-wrt.com/betas/2019/07-04-2019-r40189/

wget ftp://ftp.dd-wrt.com/betas/2019/07-04-2019-r40189/linksys-YOURROUTERFIRMWARE/ddwrt-linksys-YOURROUTERFRIMWARE-webflash.bin

write ddwrt ( hit tab key to finish the rest) linux
so example mine is: ddwrt-linksys-wrt1900ac-webflash.bin
so it would be

write ddwrt-linksys-wrt1900ac-webflash.bin linux


reboot <enter> ( to reboot the router. )

_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Sponsor
Monza
DD-WRT User


Joined: 01 Jul 2018
Posts: 438

PostPosted: Thu Jul 04, 2019 23:42    Post subject: Reply with quote
Updated WRT1200AC v1 from r40134 to r40189 with no reset, no update issues using Waterfox 56.2.11 (64 bit) Up-time 30 mins. Usual OpenVPN client yellows in syslog.

Only issue is firmware is showing - "Firmware: DD-WRT v3.0-r40188 std (07/04/19)"

Wired, wireless,OpenVPN client, DNSMasq and VPN passthru (Corp VPN by-passes OpenVPN Client) working as expected with no wired/wireless or OpenVPN drops noticed after update.

Kernel Version Linux 4.9.184 #1132 SMP Thu Jul 4 03:09:49 CEST 2019 armv7l

Will post other issues if any occur.
WENED
DD-WRT Guru


Joined: 30 May 2017
Posts: 582
Location: Rural Manitoba

PostPosted: Fri Jul 05, 2019 2:13    Post subject: Re: New Build 07-04-2019-r40189 Reply with quote
PIZZEDMEOFF wrote:
Downloads:
http site: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/07-04-2019-r40189/
ftp site: ftp://ftp.dd-wrt.com/betas/2019/07-04-2019-r40189/

SVN Timeline:
https://svn.dd-wrt.com/timeline


Update on situation:
Well i tried to update from the gui, twice and both times it rebooted back to the previous firmware...
Tried it from a reset, Same thing.

Found the issue:
this firmware is slightly bigger so the GUI bug applies to this one, you have to use the console to flash it.
other then that seems to be working alright to me, gui wise and the basics, and my configuration.



Straight forward upgrade through GUI to one 1900AC V1. Actual build # registers as 40188
Linux 4.9.184 #1132 SMP Thu Jul 4 03:09:49 CEST 2019 armv7l

Did my usual Backup & restore with new build and all appears to be running well.

_________________
Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55460
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN

WRT3200acm r55460 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40

WRT1900Ac V1 5Ghz r55460 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)

WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55460
2.4Ghz AP Ch1 HT20 Mixed

WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55460
2.4Ghz AP Ch1 HT20 Mixed

WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use

3200 Master -> LAN -> 1900ACS -> WDS 5Ghz -> 1900 V1
3200 Master -> WDS -> 3200 Slave & 1900V1
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Fri Jul 05, 2019 15:14    Post subject: Reply with quote
I tried to update using FF 67.0.4x64

Update failed and I rolled back to 6/27/19

Details: The update process took longer than expected but not excessively long. Once the router rebooted, DNS services failed. I did some testing and found that if I had OpenVPN turned on, DNS failed. Turning off OpenVPN and rebooting restored DNS but lookup times were very slow. I confirmed this by trying the update three times. Reverting to 6/27/19 restored all functions.

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
giles02134
DD-WRT User


Joined: 25 Feb 2007
Posts: 142

PostPosted: Fri Jul 05, 2019 15:42    Post subject: Reply with quote
Thanks for the detailed reports. It would appear that R40134 is the most usable of the recent (last thirty days or so) releases. It does everything I need it to do, so I'll stick with it for now.
_________________
Router: Linksys WRT1900ACSv2
Modem: Verizon Fios
DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Fri Jul 05, 2019 16:04    Post subject: Reply with quote
r40134 is very good for me, no issues at all. I will use this as my fall-back version if any future ones act up.
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Fri Jul 05, 2019 16:29    Post subject: DD-WRT v3.0-r40188 or is it r40189 std (07/04/19) Reply with quote
WRT3200ACM V1 r40189/r40188 Firefox 67.0.4 (64-bit) webflash

OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba also working fine

Only complaint (Reports as r40188) which others have stated Razz
gufus
DD-WRT Guru


Joined: 04 Aug 2012
Posts: 612
Location: behind the screen

PostPosted: Fri Jul 05, 2019 21:36    Post subject: Re: DD-WRT v3.0-r40188 or is it r40189 std (07/04/19) Reply with quote
scar1943 wrote:


Only complaint (Reports as r40188) which others have stated Razz


yeah same here

_________________
WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
DaveI
DD-WRT User


Joined: 06 Jul 2009
Posts: 333

PostPosted: Sun Jul 07, 2019 3:34    Post subject: Reply with quote
Got back from a 17 day motorcycle trip...
Router was on r40009 the entire time I was away
and performed without issues.
Tried last night to go to latest r40189 (via webflash).
Reported success but then would reboot back to previous partition. Decided to try r40134 which worked right away without issue. Decided to try r40189 again (weblash) today. Same thing. Said success then booted back to previous partition. Going to stay on r40134 as it works well for me in my configuration.

_________________
WRT1900ACSv2
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum