Is Linksys EA9200 Smart routers Supported ?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
kknop
DD-WRT Novice


Joined: 28 Nov 2009
Posts: 24

PostPosted: Sat Jul 16, 2016 17:09    Post subject: Reply with quote
does it mean we can forget about ddwrt on existing hardware?
Sponsor
sploit
DD-WRT User


Joined: 16 Apr 2016
Posts: 305
Location: California

PostPosted: Tue Jan 30, 2018 2:25    Post subject: EA9300 Reply with quote
EA9300

The EA9300 looks nice.
4 Cores @ 1.8 Ghz Drooool

The routers from linksys (except the wrt line) are locked down from flashing custom firmware from the WebGUI.

Hooking a serial cable up is a different story.

_________________
My Karma ran over your Dogma
SploitWorks Custom Flashed Routers
xtralives
DD-WRT Novice


Joined: 08 Feb 2018
Posts: 1

PostPosted: Thu Feb 08, 2018 16:02    Post subject: Reply with quote
for what its worth... the refurbs are ~$65 right now
Shocked Shocked Shocked
https://www.linksys.com/us/p/P-EA9200-RM/
Shocked Shocked Shocked
is anyone willing to buy a "sacrifice" so these could be opened up? Twisted Evil
myersw
DD-WRT Guru


Joined: 13 Jun 2006
Posts: 1609
Location: SE Michigan USA

PostPosted: Thu Feb 08, 2018 18:06    Post subject: Reply with quote
And another source. This info is really not that hard to find. Google is your friend!

https://arstechnica.com/information-technology/2016/05/linksys-wrt-routers-wont-block-open-source-firmware-despite-fcc-rules/

_________________
Unifi Security Gateway: Unifi Firmware
Netgear r7800: Voxel Firmware
Modem:Netgear CM500V voice and Data.
ISP:Comcast
tutorial for flashing "WRT" series:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=287813
DD-WRT Installation, Upgrade & Basic Setup–Cliff Notes:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=311117
Kong DD-WRT Config Tutorial:
http://www.instructables.com/id/Install-and-Configure-a-DD-WRT-Kong-Router/
I tried to be normal once. Worst 2 minutes ever.
tasman_shn
DD-WRT Novice


Joined: 12 Aug 2018
Posts: 6

PostPosted: Thu Jul 04, 2019 23:45    Post subject: Reply with quote
Hi
EA9200 succesfull flashed to DDWRT using ASUS RT-AC3200 DDWRT firmware.

flashed procedure (Use ASUS RT-AC3200 DDWRT firmware)

https://serialize.wordpress.com/2017/02/01/linksys-ea9500-stuff/#flashing

Command :
From CFE prompt execute following. Where 192.168.1.10 is where your tftp server is running.

flash -noheader 192.168.1.10:/asus_rt-ac3200-firmware.trx nflash0.trx

Also you may want to update odmid, model, partial boots and boot partition using


nvram set odmpid=ASUS
nvram set model=RT-AC3200
nvram set bootpartition=0
nvram set partialboots=0
nvram commit
diogosena
DD-WRT Novice


Joined: 11 Jun 2011
Posts: 44

PostPosted: Mon Nov 25, 2019 20:47    Post subject: Reply with quote
tasman_shn wrote:
Hi
EA9200 succesfull flashed to DDWRT using ASUS RT-AC3200 DDWRT firmware.

flashed procedure (Use ASUS RT-AC3200 DDWRT firmware)

https://serialize.wordpress.com/2017/02/01/linksys-ea9500-stuff/#flashing

Command :
From CFE prompt execute following. Where 192.168.1.10 is where your tftp server is running.

flash -noheader 192.168.1.10:/asus_rt-ac3200-firmware.trx nflash0.trx

Also you may want to update odmid, model, partial boots and boot partition using


nvram set odmpid=ASUS
nvram set model=RT-AC3200
nvram set bootpartition=0
nvram set partialboots=0
nvram commit


is this really working? what about future updates?
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 5657
Location: Texas, USA

PostPosted: Mon Nov 25, 2019 22:03    Post subject: Reply with quote
I would think that once you've converted it, flashing upgrades would be done the normal way, but it sure would be nice to have it detected as an EA9200, as I am sure that it's being detected as the ASUS RT-AC3200....
_________________
Official Forum Rules
Official Forum Guidelines
New Moderators and Helpful information
RTFM/STFW - TL;DR is NOT an excuse.

---------------------------------------------------------
E4200 v1 DD-WRT 43266 mega K4.x
R7000P DD-WRT 40270M kongac
R9000 DD-WRT 43266 std
R7800 DD-WRT 43266 std
E4200 v1 FreshTomato 2020.3
E4200 v1 FreshTomato 2020.4.development
R7000 FreshTomato 2020.4.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.8
WRT54GSv3 HyperWRT 2.2.x.development
---------------------------------------------------------
Linux User #377467 counter.li.org / linuxcounter.net
“Suitcase” v5: 4x (2x Intel® E5645) on Intel® S5500HV
“Suitcase” v1: 4xQuad P6pro-200 SL25A SMP Proliant 7000s
willybui
DD-WRT Novice


Joined: 04 Jan 2020
Posts: 3

PostPosted: Sat Jan 04, 2020 14:20    Post subject: Reply with quote
I cannot get this to work on my EA9200. Any update on this model. I tried to modify firmware but it is a bit of a learning curve. Any help would be much appreciated.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 5657
Location: Texas, USA

PostPosted: Sat Jan 04, 2020 14:28    Post subject: Reply with quote
Still "TBD": https://wiki.dd-wrt.com/wiki/index.php/Supported_Devices#Linksys

http://en.techinfodepot.shoutwiki.com/wiki/Linksys_EA9200

Not sure if one has been donated to BrainSlayer to port firmware to or not.

_________________
Official Forum Rules
Official Forum Guidelines
New Moderators and Helpful information
RTFM/STFW - TL;DR is NOT an excuse.

---------------------------------------------------------
E4200 v1 DD-WRT 43266 mega K4.x
R7000P DD-WRT 40270M kongac
R9000 DD-WRT 43266 std
R7800 DD-WRT 43266 std
E4200 v1 FreshTomato 2020.3
E4200 v1 FreshTomato 2020.4.development
R7000 FreshTomato 2020.4.development
E4200 v1 1.0.07.development
WRT3200ACM OpenWRT 18.06.8
WRT54GSv3 HyperWRT 2.2.x.development
---------------------------------------------------------
Linux User #377467 counter.li.org / linuxcounter.net
“Suitcase” v5: 4x (2x Intel® E5645) on Intel® S5500HV
“Suitcase” v1: 4xQuad P6pro-200 SL25A SMP Proliant 7000s
willybui
DD-WRT Novice


Joined: 04 Jan 2020
Posts: 3

PostPosted: Sat Jan 04, 2020 20:30    Post subject: Reply with quote
I tried all firmware but nothing worked. The closest I got was with ea6900 firmware which show the ddwrt ui but did not show wireless options. I guess it did not recognize the wireless hardware. Summary:
Ea6900 firmware: be able to access ui but no wireless
Asus rt3200: keep rebooting.
Netgear R8000: keep rebooting.

Now Im running stock firmware linksys 1.1.5 which allow me to flash 3rd party firmware from web ui.
Anyone have any idea I can try?
willybui
DD-WRT Novice


Joined: 04 Jan 2020
Posts: 3

PostPosted: Sun Jan 05, 2020 18:40    Post subject: Reply with quote
Finally get the asus_rt3200 firmware to work on EA9200.
However, for some reason, 2.4Ghz won't show up. It was there after I flash the firmware the first time. But after I config the router as repeater, now 2.4ghz is gone.
nvram erase&&reboot or reflashing couldn't bring it back.
Pabelgar
DD-WRT Novice


Joined: 22 Jan 2020
Posts: 1

PostPosted: Wed Jan 22, 2020 5:33    Post subject: About ea9200 Reply with quote
Hi, I’m new at this, in simple way, how can I flash my Ea9200 to rt3200 step by step in very easy language? I just want to use the LAN, I don’t need the WiFi, actually I will disconnect it. I just want it for VPN.
That can be done using my pc and Ethernet wire? With a software.. Or I have to open the router and connect it to a special cable?
Please can you help me?
Any useful link?
I appreciate it!
Cris P
DD-WRT Novice


Joined: 30 Jan 2020
Posts: 1

PostPosted: Fri Jan 31, 2020 15:54    Post subject: EA9200 Reply with quote
I was able to install firmware 1.1.5 through the serial port. Which version of Asus rt-3200 were people successful in installing? I tried the latest, did not work.
Thanks
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum