KongPro (OpenWRT) - 2019 / 08 / 28

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 11, 12, 13 ... 18, 19, 20  Next
Author Message
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1300

PostPosted: Sun Jun 30, 2019 14:58    Post subject: Reply with quote
Malachi wrote:
regsofweb wrote:
Has been stable for 20 hours. 2.4G is set as channel 3(because too many ch1&ch11), N, forced 40M, 20db(100mw). Transmission works well to download about 5GB to USB hard-disk which connected into USB2 port.


I’m sure all of those around you appreciate you using channel 3 and 40mhz.


'appreciate'. the worst combo using overlapping channel + forcing 40mhz not only to your own wireless env but also the neighbors

solution:
- use ch 1,6,11
- 20mhz or 20/40
- beacon interval prime numbers -see below
- dtim 2,3

https://superuser.com/questions/443178/is-it-better-to-use-a-crowded-2-4ghz-wi-fi-channel-1-6-11-or-unused-3-4-8
https://www.dslreports.com/forum/r14241618-Theory-on-Optimizing-a-802-11-Beacon
Sponsor
gallo
DD-WRT User


Joined: 07 Nov 2008
Posts: 140
Location: Spring Hill, Fl

PostPosted: Sun Jun 30, 2019 17:43    Post subject: Reply with quote
@Malachi LOL
_________________
modem: arris tm1602
router: r7800 voxel 1.0.2.77sf w/ kamoj 5.3b12 addon
ap: wrt1900ac v1 bs 43136,dir-825 b1 bs41117
NAS: Iomega ix2-200 CE 4tb, Seagate 1tb usb drive
Wash your hands and DONT TOUCH YOUR FACE!!!
endebe
DD-WRT Novice


Joined: 08 Oct 2006
Posts: 22

PostPosted: Mon Jul 01, 2019 8:08    Post subject: offline? Reply with quote
Is it just me? Desipro.de is giving me 403 error.
It's now some days

Someone is having the last build for R7800?
Thanks in advance

_________________
best Regards, endebe
----
fear is the mindreaper
---
Netgear Nighthawk X4S R7800 (Kong Pro alpha)
jackykoning
DD-WRT User


Joined: 15 May 2013
Posts: 242
Location: The Nederlands

PostPosted: Mon Jul 01, 2019 12:15    Post subject: Reply with quote
Worksforme.
http://www.desipro.de/ddwrt/
http://www.desipro.de/openwrt/

_________________
Hi Smile
2x Netgear R7800
regsofweb
DD-WRT Novice


Joined: 07 Nov 2018
Posts: 16

PostPosted: Mon Jul 01, 2019 12:57    Post subject: Reply with quote
jerrytouille wrote:
Malachi wrote:
regsofweb wrote:
Has been stable for 20 hours. 2.4G is set as channel 3(because too many ch1&ch11), N, forced 40M, 20db(100mw). Transmission works well to download about 5GB to USB hard-disk which connected into USB2 port.


I’m sure all of those around you appreciate you using channel 3 and 40mhz.


'appreciate'. the worst combo using overlapping channel + forcing 40mhz not only to your own wireless env but also the neighbors

solution:
- use ch 1,6,11
- 20mhz or 20/40
- beacon interval prime numbers -see below
- dtim 2,3

https://superuser.com/questions/443178/is-it-better-to-use-a-crowded-2-4ghz-wi-fi-channel-1-6-11-or-unused-3-4-8
https://www.dslreports.com/forum/r14241618-Theory-on-Optimizing-a-802-11-Beacon


Thanks. Set to ch6, 20M. All others keep default.
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1300

PostPosted: Mon Jul 01, 2019 13:28    Post subject: Reply with quote
regsofweb wrote:
jerrytouille wrote:
Malachi wrote:
regsofweb wrote:
Has been stable for 20 hours. 2.4G is set as channel 3(because too many ch1&ch11), N, forced 40M, 20db(100mw). Transmission works well to download about 5GB to USB hard-disk which connected into USB2 port.


I’m sure all of those around you appreciate you using channel 3 and 40mhz.


'appreciate'. the worst combo using overlapping channel + forcing 40mhz not only to your own wireless env but also the neighbors

solution:
- use ch 1,6,11
- 20mhz or 20/40
- beacon interval prime numbers -see below
- dtim 2,3

https://superuser.com/questions/443178/is-it-better-to-use-a-crowded-2-4ghz-wi-fi-channel-1-6-11-or-unused-3-4-8
https://www.dslreports.com/forum/r14241618-Theory-on-Optimizing-a-802-11-Beacon


Thanks. Set to ch6, 20M. All others keep default.


pick a prime number for your beacon. your wl clients and neighbors' will thank you
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1300

PostPosted: Mon Jul 01, 2019 15:47    Post subject: Reply with quote
latest commit fixes block-mount issue
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=4a7a8d93fa1920efbf42c5e98a637a396dac9a5c
endebe
DD-WRT Novice


Joined: 08 Oct 2006
Posts: 22

PostPosted: Tue Jul 02, 2019 16:47    Post subject: Reply with quote
jackykoning wrote:
Worksforme.
http://www.desipro.de/ddwrt/
http://www.desipro.de/openwrt/

Awkward, I get 403 (forbidden) for the whole page.
Probably I am on some blacklist with my home ip-adress.

_________________
best Regards, endebe
----
fear is the mindreaper
---
Netgear Nighthawk X4S R7800 (Kong Pro alpha)
vit5421
DD-WRT User


Joined: 12 Nov 2015
Posts: 413

PostPosted: Tue Jul 02, 2019 16:56    Post subject: Reply with quote
You have geo-block issue
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=289788&start=2625

_________________
Netgear R7800
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 267

PostPosted: Wed Jul 03, 2019 6:48    Post subject: Reply with quote
endebe wrote:
jackykoning wrote:
Worksforme.
http://www.desipro.de/ddwrt/
http://www.desipro.de/openwrt/

Awkward, I get 403 (forbidden) for the whole page.
Probably I am on some blacklist with my home ip-adress.

You can still reach Kong's site thru a web proxy.
I know this one works:
http://ultimateproxy.eu/

_________________

Netgear R7800 kongpro 19.07 20190919 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1531
Location: Canada

PostPosted: Wed Jul 03, 2019 15:36    Post subject: Reply with quote
endebe wrote:
jackykoning wrote:
Worksforme.
http://www.desipro.de/ddwrt/
http://www.desipro.de/openwrt/

Awkward, I get 403 (forbidden) for the whole page.
Probably I am on some blacklist with my home ip-adress.


Going through a VPN connection can block you.

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway WiFi 3xWireGuard - DDWRT r43652 Std -
Loaded & Testing
WHR-HP-G54 - Internal Routing - DDWRT r35531 std-special
2x E3000 - Gateway Wired IPTV - DDWRT r35652 Mega -
Loaded & Testing
E3000 - TRAVEL Wireless Client WireGuard(+25Mbit/s) - DDWRT r43516 Mega

Off Site 1

R7000 - Gateway, WiFi & WireGuard - DDWRT r43217 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r43217 Std
E2000 - Wired PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
endebe
DD-WRT Novice


Joined: 08 Oct 2006
Posts: 22

PostPosted: Wed Jul 03, 2019 16:56    Post subject: Blocking Reply with quote
I don't use any VPN.
@home it is a cable provider
@otherplaces it is my mobile network provider

@home I use kongpro with adblock & banip
@cell I use blokada without real vpn

Thanks for the proxy-link, this one worked

Could be a little bit too much security at longs server.

Is there some mirror? Like Google Drive, Dropbox, or any other?

_________________
best Regards, endebe
----
fear is the mindreaper
---
Netgear Nighthawk X4S R7800 (Kong Pro alpha)
labrok
DD-WRT User


Joined: 11 Feb 2011
Posts: 267
Location: Greece

PostPosted: Tue Jul 09, 2019 8:28    Post subject: Linksys EA-8500 Reply with quote
8 Days with 19.07 and exclusively 5G , works like a charm, added transmission (which seems a bit buggy in 19.07, its Cpu overuse issues are the same with all my OpenWRT routers) the only strange i have noticed is the throughoutput, from LAN to Wifi is full AC (almos 40MB/sec on 66% signal) but from Wifi to LAN is almost 40% of this (15-16MB/sec) read from Samba just 17MB/sec but writing is Full 40MB/s, is this an issues or its normal?
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1300

PostPosted: Tue Jul 09, 2019 17:49    Post subject: Reply with quote
Time for another 19.07 update with various fixes ssl kmod-sched cake kernel bump etc.
https://git.openwrt.org/?p=openwrt/openwrt.git;a=shortlog;h=refs/heads/openwrt-19.07
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1300

PostPosted: Thu Jul 11, 2019 0:54    Post subject: Reply with quote
Getting error flashing the new 07/11 19.07 build. r7800
The uploaded image file does not contain a supported format. Make sure that you choose the generic image format for your platform. Select 'Force upgrade' to flash the image even if the image format check fails. Use only if you are sure that the firmware is correct and meant for your device!

New checkbox appeared- 'force upgrade'. Check it and flash. It works
Goto page Previous  1, 2, 3 ... 11, 12, 13 ... 18, 19, 20  Next Display posts from previous:    Page 12 of 20
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum