KongPro (OpenWRT) - 2019 / 07 / 11

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 9, 10, 11, 12, 13  Next
Author Message
billygoat76
DD-WRT Novice


Joined: 24 Jun 2019
Posts: 4

PostPosted: Mon Jun 24, 2019 14:10    Post subject: Re: Nice Job Kong Reply with quote
jerrytouille wrote:
billygoat76 wrote:
This is on KONG 19 2019-Q2 / LuCI openwrt-19.07 branch (f138fc93) .

Software flow offloading is enabled.

http://www.dslreports.com/speedtest/51198871

Thank you for this build.
2nd run...

http://www.dslreports.com/speedtest/51199456


how about flow_offloading_hw ?


My router is the X4S R7800.

I do not have flow_offloading_hw on. Should I?
I am using cake and piece of cake.
Sponsor
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1236

PostPosted: Mon Jun 24, 2019 14:43    Post subject: Reply with quote
apparently flow_offloading_hw is not supported yet for ipq806x, so far only mt7621
billygoat76
DD-WRT Novice


Joined: 24 Jun 2019
Posts: 4

PostPosted: Mon Jun 24, 2019 15:15    Post subject: Reply with quote
I ran a test with hw_flow enabled..

http://www.dslreports.com/speedtest/51203328

pretty similar results from my novice understanding.
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1236

PostPosted: Mon Jun 24, 2019 15:22    Post subject: Reply with quote
billygoat76 wrote:
I ran a test with hw_flow enabled..

http://www.dslreports.com/speedtest/51203328

pretty similar results from my novice understanding.


yep i don't think it's actually doing anything since not supported. thanks for testing though
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1236

PostPosted: Mon Jun 24, 2019 15:26    Post subject: Reply with quote
just installed irqbalance package and run at startup with /usr/sbin/irqbalance to utilize the multicores cpu. seems to work well
billygoat76
DD-WRT Novice


Joined: 24 Jun 2019
Posts: 4

PostPosted: Mon Jun 24, 2019 15:52    Post subject: Reply with quote
I will try this ...I like tinkering anyways.Doing benchmarks and comparison is fun for me.
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1236

PostPosted: Mon Jun 24, 2019 16:47    Post subject: Reply with quote
new commit in master fixed flow offload crash
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=d344591e72e5ca96a2bf70a2df38961553185ce8
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4341
Location: Germany

PostPosted: Tue Jun 25, 2019 10:04    Post subject: Reply with quote
For those that want to do benchmarks:

opkg update
opkg install speedtest-netperf

speedtest-netperf.sh

Gives upload/download throughput with latency and cpu load.

E.g.:

2019-06-25 11:53:56 Starting speedtest for 60 seconds per transfer session.
Measure speed to netperf.bufferbloat.net (IPv4) while pinging gstatic.com.
Download and upload sessions are sequential, each with 5 simultaneous streams.
.............................................................
Download: 82.91 Mbps
Latency: [in msec, 61 pings, 0.00% packet loss]
Min: 17.423
10pct: 17.897
Median: 18.428
Avg: 18.386
90pct: 18.796
Max: 19.191
CPU Load: [in % busy (avg +/- std dev) @ avg frequency, 58 samples]
cpu0: 8.6 +/- 2.6 @ 1677 MHz
cpu1: 34.3 +/- 1.4 @ 1709 MHz
Overhead: [in % used of total CPU available]
netperf: 15.8
.............................................................
Upload: 25.36 Mbps
Latency: [in msec, 61 pings, 0.00% packet loss]
Min: 17.461
10pct: 17.871
Median: 18.910
Avg: 19.201
90pct: 20.283
Max: 27.351
CPU Load: [in % busy (avg +/- std dev) @ avg frequency, 58 samples]
cpu0: 12.3 +/- 2.2 @ 1458 MHz
cpu1: 8.5 +/- 3.0 @ 1097 MHz
Overhead: [in % used of total CPU available]
netperf: 2.5

Next build will improve darkpro theme page load time.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
regsofweb
DD-WRT Novice


Joined: 07 Nov 2018
Posts: 13

PostPosted: Tue Jun 25, 2019 14:37    Post subject: Reply with quote
Run 11/6 built about a week. Really love it.
Compare to DDWRT33762:
1. The wireless strength is better in default setting. With DDWRT 33762, it was hard to get a stable connection when I was in bathroom. But this OPENWRT can offer me stable connection on 2.4G and I can watch 10Mbps movie on NAS.

2. With DDWRT 33762, I lost the wireless sometimes. Had to set reboot at 4am everyday. With this OPENWRT, runs smoothly without reboot.

Attached a usb disk, I use Aria2 to download and my rpi could retire.

Only one issue. The USB speed is only about 35M when reading. With Linksys firmware, it was about 70M. Kong please make it fly.

Thank you SOOOOOOOOOOOOOOO much.
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4341
Location: Germany

PostPosted: Tue Jun 25, 2019 16:32    Post subject: Reply with quote
regsofweb wrote:
Run 11/6 built about a week. Really love it.
Compare to DDWRT33762:
1. The wireless strength is better in default setting. With DDWRT 33762, it was hard to get a stable connection when I was in bathroom. But this OPENWRT can offer me stable connection on 2.4G and I can watch 10Mbps movie on NAS.

2. With DDWRT 33762, I lost the wireless sometimes. Had to set reboot at 4am everyday. With this OPENWRT, runs smoothly without reboot.

Attached a usb disk, I use Aria2 to download and my rpi could retire.

Only one issue. The USB speed is only about 35M when reading. With Linksys firmware, it was about 70M. Kong please make it fly.

Thank you SOOOOOOOOOOOOOOO much.


Don't use NTFS, Linksys probably has a proprietary ntfs driver with better performance. EXT4 will give you much better speed.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
regsofweb
DD-WRT Novice


Joined: 07 Nov 2018
Posts: 13

PostPosted: Wed Jun 26, 2019 12:13    Post subject: Reply with quote
<Kong> wrote:
regsofweb wrote:
Run 11/6 built about a week. Really love it.
Compare to DDWRT33762:
1. The wireless strength is better in default setting. With DDWRT 33762, it was hard to get a stable connection when I was in bathroom. But this OPENWRT can offer me stable connection on 2.4G and I can watch 10Mbps movie on NAS.

2. With DDWRT 33762, I lost the wireless sometimes. Had to set reboot at 4am everyday. With this OPENWRT, runs smoothly without reboot.

Attached a usb disk, I use Aria2 to download and my rpi could retire.

Only one issue. The USB speed is only about 35M when reading. With Linksys firmware, it was about 70M. Kong please make it fly.

Thank you SOOOOOOOOOOOOOOO much.


Don't use NTFS, Linksys probably has a proprietary ntfs driver with better performance. EXT4 will give you much better speed.


I use NTFS with Linksys firmware but use ext4 with openwrt. I have tried two USB HDD. One is 320g 7200r 2.5" HDD+jm567. The other one is evo850 500g + asm1351. Both are in similar speed.
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1236

PostPosted: Wed Jun 26, 2019 14:36    Post subject: Reply with quote
regsofweb wrote:
<Kong> wrote:
regsofweb wrote:
Run 11/6 built about a week. Really love it.
Compare to DDWRT33762:
1. The wireless strength is better in default setting. With DDWRT 33762, it was hard to get a stable connection when I was in bathroom. But this OPENWRT can offer me stable connection on 2.4G and I can watch 10Mbps movie on NAS.

2. With DDWRT 33762, I lost the wireless sometimes. Had to set reboot at 4am everyday. With this OPENWRT, runs smoothly without reboot.

Attached a usb disk, I use Aria2 to download and my rpi could retire.

Only one issue. The USB speed is only about 35M when reading. With Linksys firmware, it was about 70M. Kong please make it fly.

Thank you SOOOOOOOOOOOOOOO much.


Don't use NTFS, Linksys probably has a proprietary ntfs driver with better performance. EXT4 will give you much better speed.


I use NTFS with Linksys firmware but use ext4 with openwrt. I have tried two USB HDD. One is 320g 7200r 2.5" HDD+jm567. The other one is evo850 500g + asm1351. Both are in similar speed.


this may sound dumb but if you're on windows make sure your wifi is set to private network instead of public which its firewall setting limits files sharing, for each router/fw despite same ssid
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7111
Location: Columbus, Ohio

PostPosted: Wed Jun 26, 2019 19:02    Post subject: Reply with quote
Just installed this on my r7800 Takes some getting used to.
How do I change the timezone?
Edit: found it lol.

What happened to wpa2-aes? too many options.

What should I have it set to?

_________________
I am far from a guru, I'm barely a novice.


Last edited by Malachi on Wed Jun 26, 2019 22:24; edited 1 time in total
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 248

PostPosted: Wed Jun 26, 2019 22:18    Post subject: Reply with quote
Changelog for 19.07.x build.

06/25/19:
-kernel update 4.14.130
-darkpro theme page load optimization
-fix software offload

------------
Changelog for 18.06.x build.

06/25/19:
-kernel update 4.14.130

_________________

Netgear R7800 kongpro 19.07 20190711 || Netgear R7000 35550M kongac (Client Bridge=5GHz, AP=2.4GHz)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
jerrytouille
DD-WRT Guru


Joined: 11 Dec 2015
Posts: 1236

PostPosted: Wed Jun 26, 2019 22:57    Post subject: Reply with quote
Malachi wrote:
Just installed this on my r7800 Takes some getting used to.
How do I change the timezone?
Edit: found it lol.

What happened to wpa2-aes? too many options.

What should I have it set to?


wpa2-psk force ccmp(aes)
Goto page Previous  1, 2, 3 ... 9, 10, 11, 12, 13  Next Display posts from previous:    Page 10 of 13
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum