I tried to do tftp recovery by many tutorials, but problem seems that i cant get any response from the router even though the leds after go like this :
all lights on
pwr light on, after second interface led to which im connected start flashing for 2 sec then whole process repeats.
I cant sniff any packets from the router in wireshark. I tried every ip which to router ever had.
I also tried doing 30/30/30 which of course didnt change anything.
What happens doesnt change even when i hold the restart key before and while powering up or pressing only other button on the router "QSS" or both combined.¨
I only tried to hold the second button after i already tried every option while holding reset key.
Is my only option serial recovery?
Why would it flash the active interface if it doesnt send or do anything on it
I tried to do tftp recovery by many tutorials, but problem seems that i cant get any response from the router even though the leds after go like this :
all lights on
pwr light on, after second interface led to which im connected start flashing for 2 sec then whole process repeats.
I cant sniff any packets from the router in wireshark. I tried every ip which to router ever had.
I also tried doing 30/30/30 which of course didnt change anything.
What happens doesnt change even when i hold the restart key before and while powering up or pressing only other button on the router "QSS" or both combined.¨
I only tried to hold the second button after i already tried every option while holding reset key.
Is my only option serial recovery?
Why would it flash the active interface if it doesnt send or do anything on it
I tried to do tftp recovery by many tutorials, but problem seems that i cant get any response from the router even though the leds after go like this :
all lights on
pwr light on, after second interface led to which im connected start flashing for 2 sec then whole process repeats.
I cant sniff any packets from the router in wireshark. I tried every ip which to router ever had.
I also tried doing 30/30/30 which of course didnt change anything.
What happens doesnt change even when i hold the restart key before and while powering up or pressing only other button on the router "QSS" or both combined.¨
I only tried to hold the second button after i already tried every option while holding reset key.
Is my only option serial recovery?
Why would it flash the active interface if it doesnt send or do anything on it
Has anyone recovered a boot loop like this one without the serial recovery? I found in this situation today after upgrade to v3.0 beta build 37305. Also it would be very very very useful to have an announcement talking about this issue in the download page.