egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
|
Posted: Sat Jun 22, 2019 15:58 Post subject: |
|
It is not entirely clear yet to me.
You show us two routers, is the top one the ISP router?
It seems so as it has the Public IP address
But the server seems connected to this router and that is not the DDWRT router?
The bottom one seems connected to its WAN port so you are double NATting?
Is this the DDWRT router with an OVPN client to ExpressVPN?
In general when you have an OVPN client running on your router and you want to reach something on or behind that router then you have to use Policy based Routing.
If you don not use Policy Based Routing your default gateway is your VPN conncetion and your firewal will not allow incoming connections on your WAN which are going out via your VPN.
When using Policy based routing the default is restored to your WAN.
_________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|