OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba still *** BROKEN ***
NAS isn't working. I verified the configuration, just not seeing my drive until I hit (APPLY) on the NAS page after every reboot or power on reset.
OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba still *** BROKEN ***
NAS isn't working. I verified the configuration, just not seeing my drive until I hit (APPLY) on the NAS page after every reboot or power on reset.
Reverted back to r40009
Did anyone create a defect and are the devs aware of it? I'm refraining from updating to the build as the NAS functionality is important for me.
OpenVPN CLIENT works fine (nordvpn server)
5GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)working fine 20MHz Mixed
NAS via USB Samba still *** BROKEN ***
NAS isn't working. I verified the configuration, just not seeing my drive until I hit (APPLY) on the NAS page after every reboot or power on reset.
Reverted back to r40009
Did anyone create a defect and are the devs aware of it? I'm refraining from updating to the build as the NAS functionality is important for me.
Ive had nothing but problums with samba with the Linksys WRT AC Series both openwrt and dd-wrt under both win7/win10
It sorta works ok under win7 _________________ WRT3200ACM openwrt 18.06.5
WRT3200ACM dd-wrt r41791
WRT54GL dd-wrt r21676
I'd be grateful to know if anyone has gotten Scheduled Reboot to work in this release. Thanks! _________________ Router: Linksys WRT1900ACSv2
Modem: Verizon Fios DD-WRT v3.0-r44048 std (08/02/20)
ISP: Verizon Fios
NAS: ReadyNas314
Joined: 10 Nov 2018 Posts: 350 Location: South Carolina
Posted: Sat Jun 22, 2019 12:40 Post subject: Re: Still no go on NAS until manualy started (apply button h
Adamcarter wrote:
scar1943 wrote:
NBA Jam wrote:
BS is likely not checking these forums often for beta test results.
Well, if someone who can, would report it. Or teach us how to.
Svn.dd-wrt.com
Just post
Well, interestingly I can't get passed the "Im a robot" routine on that sight right now. Ran me through it half dozen times before I gave up. I assume because I use a VPN router. I'll try again later.
Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r40065 std (06/20/19)
Kernel: Linux 4.9.182 #1090 SMP Thu Jun 20 03:53:36 CEST 2019 armv7l
Mode: Router, connected via WAN to N66U
Reset: No
Status: looks good so far, ~36h uptime.
did not test if wifi settings still behave "strange": https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=319905
I'm fine with flawless doing with mixed 20MHz and ac only 80MHz :D
@giles02134: keep alive / scheduled reboot is working.
Posted: Tue Jun 25, 2019 19:02 Post subject: Re: BS closed the ticket
scar1943 wrote:
Ok, I guess BS feels there isn't a problem and closed the ticket.
Meanwhile, still isn't working properly passed r40009. I've added my own comments and reopened the ticket.
That’s the best you can do. He sometimes goes on this “i’m going to ignore problems mentioned for a while” kicks. So it is best to reopen the problem if they close it...
So many times this happened with SFE and policy based routing, the other time was airprint/chromecast issues.
I find he tends to get side tracked and works on small things, instead of big sweeping issues...until kong steps in and fixes it.
I wish kong was making his own builds of the 3200acm _________________ WRT3200ACM V1 r39267 std (03/22/19) OpenVPN client